Re: [PATCH 3/5] drm/msm: mdss: Add X1E80100 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/8/2024 5:46 AM, Abel Vesa wrote:
On 24-02-08 15:42:04, Dmitry Baryshkov wrote:
On Thu, 8 Feb 2024 at 15:37, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:

On 24-01-29 17:11:25, Dmitry Baryshkov wrote:
On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:

Add support for MDSS on X1E80100.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 455b2e3a0cdd..eddf7fdbb60a 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = {
         .highest_bank_bit = 1,
  };

+static const struct msm_mdss_data x1e80100_data = {
+       .ubwc_enc_version = UBWC_4_0,
+       .ubwc_dec_version = UBWC_4_3,
+       .ubwc_swizzle = 6,
+       .ubwc_static = 1,
+       .highest_bank_bit = 2,
+       .macrotile_mode = 1,

Missing .reg_bus_bw, LGTM otherwise

Dmitry, I do not have the exact value yet.

Can I come back with a subsequent (different) patch to add it at a later stage
when I have that information?

I see no point in holding display support any further since it works
fine with the default bandwith.

If yes, I'll respin this series right away, but without the reg_bus_bw.

Please add a TODO or FIXME comment there.

Sure thing. Thanks.


I have not heard back from the clock team on the values.

But, what I can confirm at this point is for basic functional display support, we could let it go back to the default value which we have hard-coded and fill up this entry later.




+};
+
  static const struct msm_mdss_data sdm845_data = {
         .ubwc_enc_version = UBWC_2_0,
         .ubwc_dec_version = UBWC_2_0,
@@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = {
         { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data },
         { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data },
         { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data},
+       { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data},
         {}
  };
  MODULE_DEVICE_TABLE(of, mdss_dt_match);

--
2.34.1



--
With best wishes
Dmitry



--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux