Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/02/2024 01:10, Konrad Dybcio wrote:
Now that the non-legacy form of OPP is supported within the UFS driver,
go ahead and switch to it, adding support for more intermediate freq/power
states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Extracted out of:
https://lore.kernel.org/linux-arm-msm/15d2bd66-29f3-435b-8494-d82ec4036413@xxxxxxxxxx/#t

Changes since v1:
- Set the reference clock rate to 0 in opp entries, it doesn't support
   ratesetting anyway. Confirmed UFS still works.
---
  arch/arm64/boot/dts/qcom/sm8550.dtsi | 50 +++++++++++++++++++++++++++++-------
  1 file changed, 41 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index c89d8f3dad21..144e20edf237 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1966,6 +1966,7 @@ ufs_mem_hc: ufs@1d84000 {
  			iommus = <&apps_smmu 0x60 0x0>;
  			dma-coherent;
+ operating-points-v2 = <&ufs_opp_table>;
  			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -1986,18 +1987,49 @@ ufs_mem_hc: ufs@1d84000 {
  				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
  				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
  				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<100000000 403000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
  			qcom,ice = <&ice>;
status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
  		};
ice: crypto@1d88000 {

---
base-commit: 076d56d74f17e625b3d63cf4743b3d7d02180379
change-id: 20240203-topic-8550_ufs_oppv2-bb88d63a4c58

Best regards,

Looks fine:
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Let me have a test run with it first before applying.

Neil




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux