[PATCH v2 04/18] clk: qcom: gcc-sa8775p: Set delay for Venus CLK resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8775 being generally close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/gcc-sa8775p.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sa8775p.c b/drivers/clk/qcom/gcc-sa8775p.c
index 8171d23c96e6..c2b403cb6301 100644
--- a/drivers/clk/qcom/gcc-sa8775p.c
+++ b/drivers/clk/qcom/gcc-sa8775p.c
@@ -4662,8 +4662,8 @@ static const struct qcom_reset_map gcc_sa8775p_resets[] = {
 	[GCC_USB3UNIPHY_PHY_MP0_BCR] = { 0x5c020 },
 	[GCC_USB3UNIPHY_PHY_MP1_BCR] = { 0x5c024 },
 	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x76000 },
-	[GCC_VIDEO_AXI0_CLK_ARES] = { 0x34014, 2 },
-	[GCC_VIDEO_AXI1_CLK_ARES] = { 0x3401c, 2 },
+	[GCC_VIDEO_AXI0_CLK_ARES] = { .reg = 0x34014, .bit = 2, .udelay = 400 },
+	[GCC_VIDEO_AXI1_CLK_ARES] = { .reg = 0x3401c, .bit = 2, .udelay = 400 },
 	[GCC_VIDEO_BCR] = { 0x34000 },
 };
 

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux