[PATCH v2 09/18] clk: qcom: gcc-sm8250: Set delay for Venus CLK resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/gcc-sm8250.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
index c6c5261264f1..61d01d4c379b 100644
--- a/drivers/clk/qcom/gcc-sm8250.c
+++ b/drivers/clk/qcom/gcc-sm8250.c
@@ -3576,8 +3576,8 @@ static const struct qcom_reset_map gcc_sm8250_resets[] = {
 	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
 	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
 	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
-	[GCC_VIDEO_AXI0_CLK_ARES] = { 0xb024, 2 },
-	[GCC_VIDEO_AXI1_CLK_ARES] = { 0xb028, 2 },
+	[GCC_VIDEO_AXI0_CLK_ARES] = { 0xb024, .bit = 2, .udelay = 150 },
+	[GCC_VIDEO_AXI1_CLK_ARES] = { 0xb028, .bit = 2, .udelay = 150 },
 };
 
 static const struct clk_rcg_dfs_data gcc_dfs_clocks[] = {

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux