Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property

[Jie Luo <quic_luoj@xxxxxxxxxxx>]

On 1/30/2024 8:35 AM, Christian Marangi wrote:
> +
> +	/* If div is /256 assume nobody have set this value and
> +	 * try to find one MDC rate that is close the 802.3 spec of
> +	 * 2.5MHz
> +	 */
> +	for (div = 256; div >= 8; div /= 2) {
> +		/* Stop as soon as we found a divider that
> +		 * reached the closest value to 2.5MHz
> +		 */
> +		if (DIV_ROUND_UP(ahb_rate, div) > 2500000)
> +			break;

Hi Christian,
Sorry for the delayed review.

The MDIO hardware block supports higher frequency 6.25M and 12.5M,
Would you remove this 2.5MHZ limitation? On the IPQ platform, we
normally use 6.25MHZ.
> +
> +		priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div);
> +	}
>   }