[PATCH v2 15/18] clk: qcom: videocc-sm8250: Set delay for Venus CLK resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/videocc-sm8250.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index ad46c4014a40..51b9816ec458 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -323,10 +323,10 @@ static struct clk_regmap *video_cc_sm8250_clocks[] = {
 static const struct qcom_reset_map video_cc_sm8250_resets[] = {
 	[VIDEO_CC_CVP_INTERFACE_BCR] = { 0xe54 },
 	[VIDEO_CC_CVP_MVS0_BCR] = { 0xd14 },
-	[VIDEO_CC_MVS0C_CLK_ARES] = { 0xc34, 2 },
+	[VIDEO_CC_MVS0C_CLK_ARES] = { 0xc34, .bit = 2, .udelay = 150 },
 	[VIDEO_CC_CVP_MVS0C_BCR] = { 0xbf4 },
 	[VIDEO_CC_CVP_MVS1_BCR] = { 0xd94 },
-	[VIDEO_CC_MVS1C_CLK_ARES] = { 0xcd4, 2 },
+	[VIDEO_CC_MVS1C_CLK_ARES] = { 0xcd4, .bit = 2, .udelay = 150 },
 	[VIDEO_CC_CVP_MVS1C_BCR] = { 0xc94 },
 };
 

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux