Linux ARM MSM

• Thread Index

• [PATCH v4 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 7/8] media: qcom: camss: Decompose register and link operations
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 5/8] media: qcom: camss: Move format related functions
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 4/8] media: qcom: camss: Attach formats to CSIPHY resources
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 3/8] media: qcom: camss: Attach formats to CSID resources
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 1/8] media: qcom: camss: Add per sub-device type resources
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• [PATCH v4 0/8] Move camss version related defs in to resources
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH next] drivers: soc: qcom: Auto cleanup using __free(device_node)
  • From: prabhav kumar <pvkumar5749404@xxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: display/msm/dsi: allow specifying TE source
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/3] drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 3/3] drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 18/18] media: venus: Refactor hfi_buffer_alloc_mode_supported
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH v2 10/18] media: venus: Use flex array for hfi_session_release_buffer_pkt
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2 09/18] media: venus: Remove unused structs
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/5] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: socinfo: Update X1E PMICs
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/2] pinctrl: qcom: spmi: Add PMC8380
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH] arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] soc: qcom: socinfo: Update X1E PMICs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: spmi: Add PMC8380
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Document PMC8380
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] PMC8380 PMIC pinctrl
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: drop second output clock name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 4/7] ASoC: codecs: wcd937x: add basic controls
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [PATCH v4 2/7] ASoC: codecs: wcd937x-sdw: add SoundWire driver
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v2 14/14] drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/14] drm/msm/hdmi: drop hpd-gpios support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 13/14] drm/msm/hdmi: ensure that HDMI is one if HPD is requested
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/14] drm/msm/hdmi: expand the HDMI_CFG macro
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/14] drm/msm/hdmi: rename hpd_clks to pwr_clks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/14] drm/msm/hdmi: implement proper runtime PM handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/14] drm/msm/hdmi: add runtime PM calls to DDC transfer function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/14] drm/msm/hdmi: switch to pm_runtime_resume_and_get()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/14] drm/msm/hdmi: drop clock frequency assignment
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/14] drm/msm/hdmi: switch to clk_bulk API
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/14] drm/msm/hdmi: switch to atomic_pre_enable/post_disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/14] drm/msm/hdmi: move the alt_iface clock to the hpd list
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/14] drm/msm/hdmi: simplify extp clock handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/14] drm/msm/hdmi: set infoframes on all pre_enable calls
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/14] drm/msm/hdmi: rework and fix the HPD even generation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] Revert "drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Update zone1_thres_count to 3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Update zone1_thres_count to 3
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Update zone1_thres_count to 3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] soc: qcom: icc-bwmon: Update zone1_thres_count to 3
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] phy: qcom: qmp-pcie: restore compatibility with existing DTs
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: qcom: sm8650: Add hwlock to remoteproc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 2/2] scsi: ufs: qcom: Update the UIC Command Timeout
  • From: "Bao D. Nguyen" <quic_nguyenb@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v3 3/3] drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/3] drm/display: split DSC helpers from DP helpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/3] drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/3] drm/panel: two fixes for lg-sw43408
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: drop second output clock name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] phy: qcom: qmp-pcie: restore compatibility with existing DTs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] phy: qcom: qmp-pcie: drop second clock-output-names entry
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH next] drivers: soc: qcom: Auto cleanup using __free(device_node)
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: Give page_aligned size for dma api's
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH next] drivers: soc: qcom: Auto cleanup using __free(device_node)
  • From: prabhav kumar <pvkumar5749404@xxxxxxxxx>
• Re: [PATCH RFC v3 1/9] libfdt: board-id: Implement board-id scoring
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH next] drivers: soc: qcom: Auto cleanup using __free(device_node)
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH RFC v3 5/9] dt-bindings: board: Document board-ids for Qualcomm devices
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH next RESEND] drivers: soc: qcom: Auto cleanup using __free()
  • From: Prabhav Kumar Vaish <pvkumar5749404@xxxxxxxxx>
• Re: [PATCH v3 3/4] firmware: psci: Read and use vendor reset types
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v3 7/9] arm64: boot: dts: qcom: Use phandles for thermal_zones
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 8/9] arm64: boot: dts: qcom: sm8550: Split into overlays
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 3/9] fdt-select-board: Add test tool for selecting dtbs based on board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 1/9] libfdt: board-id: Implement board-id scoring
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 5/9] dt-bindings: board: Document board-ids for Qualcomm devices
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 6/9] arm64: boot: dts: sm8650: Add board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH RFC v3 9/9] tools: board-id: Add test suite
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Enable download mode register write
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 01/12] soc: qcom: add firmware name helper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] qcom: initial support for the SHIFTphone 8
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 01/12] soc: qcom: add firmware name helper
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 8/8] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v6 0/8] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 01/12] soc: qcom: add firmware name helper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 01/12] soc: qcom: add firmware name helper
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH 11/12] arm64: dts: qcom: apq8016-sbc: drop firmware-name properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 12/12] arm64: dts: qcom: apq8096-db820c: drop firmware-name properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 10/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 08/12] remoteproc: qcom_wcnss: switch to mbn files by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 09/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 07/12] remoteproc: qcom_q6v5_pas: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 05/12] remoteproc: qcom_q6v5_mss: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 04/12] remoteproc: qcom_q6v5_mss: switch to mbn files by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 03/12] soc: qcom: wcnss_ctrl: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 02/12] wifi: wcn36xx: make use of QCOM_FW_HELPER
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 01/12] soc: qcom: add firmware name helper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 00/12] arm64: qcom: autodetect firmware paths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: add QCM6490 SHIFTphone 8
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/7] ASoC: dt-bindings: document wcd937x Audio Codec
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/6] drm/ci: build virtual GPU driver as module
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/ci: generate testlist from build
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/ci: generate testlist from build
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] PCI : Refactoring error log prints for better readability
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v2 1/1] PCI : Refactoring error log prints for better readability
  • From: Onkarnarth <onkarnath.1@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH v1 1/1] arm64: dts: qcom: Add coresight nodes for SA8775p
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v1 0/1] arm64: dts: qcom: Add coresight nodes for SA8775p
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v5 4/5] arm64: dts: qcom: sm8550: Add Broadcast_AND register in LLCC block
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v5 5/5] arm64: dts: qcom: sm8650: Add Broadcast_AND register in LLCC block
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v5 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v5 0/5] LLCC: Support for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v5 3/5] arm64: dts: qcom: sm8450: Add Broadcast_AND register in LLCC block
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/ci: generate testlist from build
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: arm: Document reboot mode magic
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: power: reset: Convert mode-.* properties to array
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] drm/msm: remove python 3.9 dependency for compiling msm
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 08/11] drm/msm/dp: switch to struct drm_edid
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 4/7] HID: i2c-hid: elan: fix reset suspend current leakage
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: add QCM6490 SHIFTphone 8
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] qcom: initial support for the SHIFTphone 8
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 08/11] drm/msm/dp: switch to struct drm_edid
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: Give page_aligned size for dma api's
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 08/11] drm/msm/dp: switch to struct drm_edid
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 7/7] drm/msm/dpu: support setting the TE source
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/7] drm/msm/dpu: rework vsync_source handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/7] drm/msm/dsi: parse vsync source from device tree
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/7] drm/msm/dpu: pull the is_cmd_mode out of _dpu_encoder_update_vsync_source()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/7] dt-bindings: display/msm/dsi: allow specifying TE source
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/7] drm/msm/dsi: drop unused GPIOs handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/7] drm/msm/dpu: convert vsync source defines to the enum
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/7] drm/msm/dpu: handle non-default TE source pins
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/7] HID: i2c-hid: elan: fix reset suspend current leakage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/7] HID: i2c-hid: elan: fix reset suspend current leakage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/1] PCI : Refactoring error log prints for better readability
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• Re: [PATCH v2 6/6] drm/ci: update xfails for the new testlist
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/6] drm/ci: skip driver specific tests
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/6] drm/ci: uprev IGT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/6] drm/ci: build virtual GPU driver as module
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/ci: generate testlist from build
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/6] drm/ci: uprev mesa version
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v2] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Slark Xiao <slark_xiao@xxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/3] coresight: Add reserve trace id support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v13 6/6] PCI: qcom: Add OPP support to scale performance
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 5/6] PCI: Bring the PCIe speed to MBps logic to new pcie_link_speed_to_mbps()
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 4/6] arm64: dts: qcom: sm8450: Add OPP table support to PCIe
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 3/6] dt-bindings: pci: qcom: Add OPP table
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 1/6] arm64: dts: qcom: sm8450: Add interconnect path to PCIe node
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v13 0/6] PCI: qcom: Add support for OPP
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Check for zap node availability
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re:Re: Re:Re: Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re: [PATCH next] drivers: soc: qcom: Auto cleanup using __free(device_node)
  • From: prabhav kumar <pvkumar5749404@xxxxxxxxx>
• Re: [PATCH v4 1/7] ASoC: dt-bindings: document wcd937x Audio Codec
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: arm: Add trace-id for coresight dummy source
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: qcom,gpi: document the SDX75 GPI DMA Engine
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Check for zap node availability
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 08/11] drm/msm/dp: switch to struct drm_edid
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Add obj flags to gpu devcoredump
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 4/4] drm/msm: switch msm_kms to use msm_iommu_disp_new()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 3/4] drm/msm/iommu: introduce msm_iommu_disp_new() for msm_kms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 2/4] drm/msm/iommu: rename msm_fault_handler to msm_gpu_fault_handler
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4] drm/msm/a6xx: request memory region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• [PATCH v3] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: linux@xxxxxxxxxxx
• [RFC PATCH 3/4] drm/msm/iommu: introduce msm_iommu_disp_new() for msm_kms
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [RFC PATCH 2/4] drm/msm/iommu: rename msm_fault_handler to msm_gpu_fault_handler
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [RFC PATCH 4/4] drm/msm: switch msm_kms to use msm_iommu_disp_new()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: Check for zap node availability
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 1/7] hwspinlock: Introduce refcount
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH v7 0/3] arm64: qcom: sa8775p: add cache coherency support for SA8775P
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH v5 0/5] PCI: dwc: Add support for integrating HDMA with DWC EP driver
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v11 0/3] arm64: qcom: sa8775p: add support for EP PCIe
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH] PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks from Devicetree
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v12 0/8] PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: "Darrick J. Wong" <djwong@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: msm8998: enable adreno_smmu by default
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] PCI: controller: Move to agnostic GPIO API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] PCI : Refactoring error log prints for better readability
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• [PATCH 1/1] PCI : Refactoring error log prints for better readability
  • From: Onkarnarth <onkarnath.1@xxxxxxxxxxx>
• Re: Re:Re: Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: PCI: cdns,cdns-pcie-host: drop redundant msi-parent and pci-bus.yaml
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v4 0/5] PCI: controller: Move to agnostic GPIO API
  • From: Krzysztof Wilczyński <kwilczynski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: dma: qcom,gpi: document the SDX75 GPI DMA Engine
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sdx75: Support for I2C and SPI
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 0/2] Add I2C and SPI busses for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re:Re:Re: Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• [PATCH v2 6/6] drm/ci: update xfails for the new testlist
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 5/6] drm/ci: skip driver specific tests
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 4/6] drm/ci: uprev IGT
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 2/6] drm/ci: generate testlist from build
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 3/6] drm/ci: build virtual GPU driver as module
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 1/6] drm/ci: uprev mesa version
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 0/6] drm/ci: uprev mesa/IGT and generate testlist
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] hwspinlock: Introduce refcount
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/7] hwspinlock: Introduce hwspin_lock_bust()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/7] hwspinlock: Introduce hwspin_lock_bust()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v4 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re:Re: Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• [PATCH] clk: qcom: add missing MODULE_DESCRIPTION() macros
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH 3/7] hwspinlock: Introduce hwspin_lock_bust()
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 4/7] hwspinlock: qcom: implement bust operation
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 1/7] hwspinlock: Introduce refcount
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 2/7] hwspinlock: Enable hwspinlock sharing
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 0/7] Add support for hwspinlock bust
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: qcom: sm8650: Add hwlock to remoteproc
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: Give page_aligned size for dma api's
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Enable download mode register write
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8650: Enable download mode register write
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH] firmware: qcom_scm: Give page_aligned size for dma api's
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH] tracing/treewide: Remove second parameter of __assign_str()
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH v2] dmaengine: qcom: gpi: remove unused struct 'reg_info'
  • From: linux@xxxxxxxxxxx
• Re: [PATCH] dmaengine: qcom: gpi: remove unused struct 'gpi_desc'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• [PATCH 5.4.x] arm64: dts: qcom: Fix 'interrupt-map' parent address cells
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: qcom: gpi: remove unused struct 'gpi_desc'
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 2/3] coresight: Add reserve trace id support
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: arm: Add trace-id for coresight dummy source
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH] dmaengine: qcom: gpi: remove unused struct 'gpi_desc'
  • From: linux@xxxxxxxxxxx
• Re: [PATCH v1 2/3] coresight: Add reserve trace id support
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Delivery Failure
  • From: "System Administrator"@web.codeaurora.org.net
• Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] ASoC: codecs: wcd937x: add basic controls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/7] ASoC: codecs: wcd937x-sdw: add SoundWire driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] net: qrtr: ns: Fix module refcnt
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] drm/msm: log iommu init failure
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] usb: typec: ucsi: glink: merge pmic_glink_altmode driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/34] Qualcomm video encoder and decoder driver
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 00/34] Qualcomm video encoder and decoder driver
  • From: Hyunjun Ko <zzoon@xxxxxxxxxx>
• Re: [PATCH RESEND v5 1/3] dt-bindings: vendor-prefixes: Add Schneider Electric
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• [PATCH v4 6/7] ASoC: codecs: wcd937x: add capture dapm widgets
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 7/7] ASoC: codecs: wcd937x: add audio routing and Kconfig
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 5/7] ASoC: codecs: wcd937x: add playback dapm widgets
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 3/7] ASoC: codecs: wcd937x: add wcd937x codec driver
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 4/7] ASoC: codecs: wcd937x: add basic controls
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 2/7] ASoC: codecs: wcd937x-sdw: add SoundWire driver
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 1/7] ASoC: dt-bindings: document wcd937x Audio Codec
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v4 0/7] ASoC: codecs: wcd937x: add wcd937x audio codec support
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH V4 0/4] Add support for PCIe PHY in IPQ9574
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 4/4] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 2/4] phy: qcom-qmp: Add missing offsets for Qserdes PLL registers.
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 3/4] phy: qcom-qmp: Add missing register definitions for PCS V5
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ9574 QMP PCIe PHYs
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH v1 2/3] coresight: Add reserve trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 0/3] coresight: Add reserve trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 3/3] coresight: dummy: Add reserve atid support for dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 1/3] dt-bindings: arm: Add trace-id for coresight dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: arm: Document reboot mode magic
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 0/4] Implement vendor resets for PSCI SYSTEM_RESET2
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 3/4] firmware: psci: Read and use vendor reset types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: power: reset: Convert mode-.* properties to array
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom-scm: Remove QCOM_SMC_WAITQ_FLAG_WAKE_ALL
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] drm/msm: log iommu init failure
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx>
• Re: [PATCH 7/8] usb: typec: ucsi: glink: merge pmic_glink_altmode driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: msm8998: enable adreno_smmu by default
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v5 1/3] dt-bindings: vendor-prefixes: Add Schneider Electric
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: msm8998: enable adreno_smmu by default
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mmc: sdhci-msm: Document the SDX75 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re:Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• [PATCH 0/3] Add SDHCI support for SDX75 SoC
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sdx75: Add SDHCI node
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: mmc: sdhci-msm: Document the SDX75 compatible
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• Re: Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH RESEND v5 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH RESEND v5 2/3] dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH RESEND v5 1/3] dt-bindings: vendor-prefixes: Add Schneider Electric
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH RESEND v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: net: qcom: ethernet: Allow dma-coherent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re:Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re:Re: Re:Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Re:Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8998: enable adreno_smmu
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V3 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re:Re:Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re:Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• [PATCH v4 2/2] dt-bindings: net: qcom: ethernet: Allow dma-coherent
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• [PATCH v4 1/2] arm64: dts: qcom: sa8775p: mark ethernet devices as DMA-coherent
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• [PATCH v4 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8998: enable adreno_smmu
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm: Add obj flags to gpu devcoredump
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Add obj flags to gpu devcoredump
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH] firmware: qcom-scm: Remove QCOM_SMC_WAITQ_FLAG_WAKE_ALL
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8998: enable adreno_smmu
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] net: qrtr: ns: Fix module refcnt
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set"
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: ufs: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: Use 'ufshc' as the node name for UFS controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 08/11] drm/msm/dp: switch to struct drm_edid
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 5.15 140/168] arm64: dts: qcom: Fix interrupt-map parent address cells
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 091/111] arm64: dts: qcom: Fix interrupt-map parent address cells
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 2/5] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 2/5] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 2/5] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v12 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v12 6/6] PCI: qcom: Add OPP support to scale performance
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v12 6/6] PCI: qcom: Add OPP support to scale performance
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] net: qrtr: ns: Fix module refcnt
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set"
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] Revert "drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 RESEND 4/8] PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks from Devicetree
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH V5 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH V5 3/6] dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller.
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: qcom: Update DT bindings for multiple DT
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH net-next] net: revert partially applied PHY topology series
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: Move some common usb node settings to SoC dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• Re: [PATCH v3 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 5/8] media: qcom: camss: Move format related functions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] net: qrtr: ns: Fix module refcnt
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] media: qcom: camss: Move format related functions
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH] drm/msm: Add obj flags to gpu devcoredump
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH net-next] net: revert partially applied PHY topology series
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v3 5/8] media: qcom: camss: Move format related functions
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v3 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 26/26] media: dvb-frontends: tda10048: Make the range of z explicit.
  • From: Michael Ira Krufky <mkrufky@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 26/26] media: dvb-frontends: tda10048: Make the range of z explicit.
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: clock: qcom: Add AHB clock for SM8150
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: qcom,dwc3: fix interrupt max items
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/8] media: qcom: camss: Add per sub-device type resources
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sm4450: Add cpufreq support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 3/4] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 0/4] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v4 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: Move some common usb node settings to SoC dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 2/3] arm64: dts: qcom: msm8998: add venus node
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH v2] docs: document python version used for compilation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550: Move some common usb node settings to SoC dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH V3 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ9574 QMP PCIe PHYs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 3/6] dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 0/5] soc: qcom: add in-kernel pd-mapper implementation
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH v3 2/2] drm/msm/a6xx: request memory region
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] drm/msm/a6xx: request memory region
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4] drm/msm/a6xx: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• Re: [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 5/6] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 2/6] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 3/6] dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller.
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 6/6] PCI: qcom: Add support for IPQ9574
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 0/6] Add PCIe support for IPQ9574
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V5 1/6] Add PCIe pipe clock definitions for IPQ9574 SoC.
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V3 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V3 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ9574 QMP PCIe PHYs
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V3 0/2] Add support for PCIe PHY in IPQ9574
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] drm/msm/a6xx: request memory region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/2] drm/msm/a6xx: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• [PATCH v3 1/2] drm/msm/a6xx: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• [PATCH v3 0/2] drm/msm/a6xx: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• Re: [PATCH v2] docs: document python version used for compilation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2] docs: document python version used for compilation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/9] arm64: dts: qcom: fix description of the Type-C signals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 4/5] soc: qcom: add pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 5/5] remoteproc: qcom: enable in-kernel PD mapper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 3/5] soc: qcom: pdr: extract PDR message marshalling data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 2/5] soc: qcom: pdr: fix parsing of domains lists
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 0/5] soc: qcom: add in-kernel pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/6] soc: qcom: pdr: protect locator_addr with the main mutex
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/a6xx: request memory region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/a6xx: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: request memory region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: request memory region
  • From: Kiarash Hajian <kiarash8112hajian@xxxxxxxxx>
• Copia di: Yearning for Your Affectionate Words
  • From: INQAS <inqas@xxxxxxxx>
• Re: [PATCH v4 RESEND 5/8] PCI: qcom: Add support for IPQ9574
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 RESEND 4/8] PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks from Devicetree
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 4/7] HID: i2c-hid: elan: fix reset suspend current leakage
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] media: qcom: camss: Add per sub-device type resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: Constify struct pll_vco
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] clk: qcom: Park shared RCGs upon registration
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v3 0/8] Move camss version related defs in to resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 7/8] media: qcom: camss: Decompose register and link operations
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 5/8] media: qcom: camss: Move format related functions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 4/8] media: qcom: camss: Attach formats to CSIPHY resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 3/8] media: qcom: camss: Attach formats to CSID resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 1/8] media: qcom: camss: Add per sub-device type resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] clk: qcom: Constify struct pll_vco
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add basic APR sound support for SC7280 SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 0/2] drm/msm/gen_header: allow skipping the validation
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/ci: validate drm/msm XML register files against schema
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V5 RESEND 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 12/12] arm64: dts: qcom: sm8650: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 11/12] arm64: dts: qcom: sm8550: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 10/12] arm64: dts: qcom: sm8450: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 09/12] arm64: dts: qcom: sm8350: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 08/12] arm64: dts: qcom: sm8250: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 07/12] arm64: dts: qcom: sm8150: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 06/12] arm64: dts: qcom: sm6350: Update GPU thermal zone settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 05/12] arm64: dts: qcom: sm6115: Update GPU thermal zone settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 04/12] arm64: dts: qcom: sdm845: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 03/12] arm64: dts: qcom: sdm630: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 02/12] arm64: dts: qcom: sc8280xp: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 01/12] arm64: dts: qcom: sc8180x: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 00/12] Adreno cooling, take 2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v2 00/31] Clean up thermal zone polling-delay
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 31/31] arm64: dts: qcom: sm8650-*: Remove thermal zone polling delays
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sc7280: Add APR nodes for sound
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH DNM 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/2] Add basic APR sound support for SC7280 SoC
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 31/31] arm64: dts: qcom: sm8650-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 30/31] arm64: dts: qcom: sm8550-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 29/31] arm64: dts: qcom: sm8450-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 28/31] arm64: dts: qcom: sm8350-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 27/31] arm64: dts: qcom: sm8250-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 26/31] arm64: dts: qcom: sm8150-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 25/31] arm64: dts: qcom: sm6375-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 24/31] arm64: dts: qcom: sm6350-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 23/31] arm64: dts: qcom: sm6125-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 22/31] arm64: dts: qcom: sm6115-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 21/31] arm64: dts: qcom: sdm845-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 20/31] arm64: dts: qcom: sdm660-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 19/31] arm64: dts: qcom: sc8280xp-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 18/31] arm64: dts: qcom: sc8180x-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 17/31] arm64: dts: qcom: sc7280-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 16/31] arm64: dts: qcom: sc7180-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 15/31] arm64: dts: qcom: sa8775p-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 14/31] arm64: dts: qcom: qcs404-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 13/31] arm64: dts: qcom: qcm2290-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 12/31] arm64: dts: qcom: pmx75: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 11/31] arm64: dts: qcom: pms405: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 10/31] arm64: dts: qcom: pm7550ba: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 09/31] arm64: dts: qcom: msm8998-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 08/31] arm64: dts: qcom: msm8996-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 07/31] arm64: dts: qcom: msm8976-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 06/31] arm64: dts: qcom: msm8953-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/31] arm64: dts: qcom: msm8939-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/31] arm64: dts: qcom: msm8916-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/31] arm64: dts: qcom: ipq9574-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/31] arm64: dts: qcom: ipq8074-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/31] arm64: dts: qcom: ipq6018-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/31] Clean up thermal zone polling-delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: pmic_glink: Handle the return value of pmic_glink_init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 1/1] nvmem: Change return type of reg read/write to ssize_t
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCH] soc: qcom: pmic_glink: Handle the return value of pmic_glink_init
  • From: Chen Ni <nichen@xxxxxxxxxxx>
• [PATCH v3 1/1] nvmem: Change return type of reg read/write to ssize_t
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v3 0/1] nvmem: Handle actual amount of data read/written by suppliers
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: add QCM6490 SHIFTphone 8
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH] bus: mhi: host: Add Foxconn SDX72 related support
  • From: Slark Xiao <slark_xiao@xxxxxxx>
• Re: [PATCH v2 10/18] media: venus: Use flex array for hfi_session_release_buffer_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 18/18] media: venus: Refactor hfi_buffer_alloc_mode_supported
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 17/18] media: venus: Refactor hfi_session_fill_buffer_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 16/18] media: venus: Refactor hfi_sys_get_property_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 15/18] media: venus: Refactor hfi_session_empty_buffer_compressed_pkt
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] media: venus: Refactor hfi_session_empty_buffer_uncompressed_plane0_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 13/18] media: venus: Refactor struct hfi_uncompressed_format_supported
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: Remove unused structs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 12/18] media: venus: Refactor struct hfi_session_get_property_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 11/18] media: venus: Refactor struct hfi_uncompressed_plane_info
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 10/18] media: venus: Use flex array for hfi_session_release_buffer_pkt
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: Remove unused structs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: fix encoder irq wait skip
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: fix encoder irq wait skip
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: fix encoder irq wait skip
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Ensure irqs aren't disabled by rpmh_rsc_send_data() callers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: guard ctl irq callback register/unregister
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix encoder irq wait skip
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: guard ctl irq callback register/unregister
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 01/18] media: allegro: nal-hevc: Refactor nal_hevc_sub_layer_hrd_parameters
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH] soc: qcom: rpmh-rsc: Ensure irqs aren't disabled by rpmh_rsc_send_data() callers
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v12 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Mayank Rana <quic_mrana@xxxxxxxxxxx>
• [PATCH] drm/msm/dpu: guard ctl irq callback register/unregister
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH] drm/msm/dpu: fix encoder irq wait skip
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH] docs: document python version used for compilation
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v12 6/6] PCI: qcom: Add OPP support to scale performance
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH 2/2] drm/msm: Dump correct dbgahb clusters on a750
  • From: Connor Abbott <cwabbott0@xxxxxxxxx>
• [PATCH 1/2] drm/msm: Use a7xx family directly in gpu_state
  • From: Connor Abbott <cwabbott0@xxxxxxxxx>
• [PATCH 0/2] drm/msm: Fixes for devcoredump on a750
  • From: Connor Abbott <cwabbott0@xxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] docs: document python version used for compilation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 02/13] mfd: pm8008: fix regmap irq chip initialisation
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drm/msm: remove python 3.9 dependency for compiling msm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>