Linux ARM MSM

• Thread Index

• Re: [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH AUTOSEL 6.1 03/15] bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 03/20] bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 04/28] bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 03/28] serial: qcom-geni: Don't cancel/abort if we can't get the port lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add LG G4 (h815)
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8150-hdk: enable WiFI support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/9] hyperv: Convert from tasklet to BH workqueue
  • From: Allen <allen.lkml@xxxxxxxxx>
• Re: [PATCH v2 00/10] perf: Avoid placing cpumask var on stack
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• Re: [PATCH v3 01/10] cpumask: add cpumask_any_and_but()
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• Re: [PATCH v2 00/10] perf: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 07/10] perf/hisi_pcie: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 08/10] perf/hisi_uncore: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 10/10] perf/thunderx2: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 09/10] perf/qcom_l2: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 05/10] perf/arm_dsu: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 06/10] perf/dwc_pcie: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 01/10] cpumask: add cpumask_any_and_but()
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 04/10] perf/arm_cspmu: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 02/10] perf/alibaba_uncore_drw: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 03/10] perf/arm-cmn: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v3 00/10] perf: Avoid placing cpumask on the stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 727900b675b749c40ba1f6669c7ae5eb7eb8e837
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] soc: qcom: pmic_glink: don't traverse clients list without a lock
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 1/6] drm/msm/dpu: fix video mode DSC for DSI
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 1/6] drm/msm/dpu: fix video mode DSC for DSI
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• Re: [RESEND PATCH] arm64: defconfig: build ath12k as a module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/10] perf: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v3 0/6] Add DSC support to DSI video panel
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• Re: [PATCH v2 10/10] perf/thunderx2: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 09/10] perf/qcom_l2: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 08/10] perf/hisi_uncore: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 07/10] perf/hisi_pcie: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 06/10] perf/dwc_pcie: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v3 0/6] Add DSC support to DSI video panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/10] perf/arm_dsu: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 03/10] perf/arm-cmn: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 04/10] perf/arm_cspmu: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/10] perf/alibaba_uncore_drw: Avoid placing cpumask var on stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: Add basic support for LG H815
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] scsi: ufs: qcom: Add sanity checks for gear/lane values during ICC scaling
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: msm8996: Add missing UFS host controller reset
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 7/9] s390: Convert from tasklet to BH workqueue
  • From: Allen <allen.lkml@xxxxxxxxx>
• Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH RESEND] arm64: dts: qcom: qcm6490-idp: Name the regulators
  • From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
• [PATCH RESEND] arm64: dts: qcom: qcs6490-rb3gen2: enable PMIC Volume and Power buttons
  • From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
• [PATCH RESEND] soundwire: qcom: allow multi-link on newer devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] scsi: ufs: qcom: Add sanity checks for gear/lane values during ICC scaling
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 1/2] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 0/2] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• [PATCH v2 10/10] perf/thunderx2: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 09/10] perf/qcom_l2: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 08/10] perf/hisi_uncore: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 06/10] perf/dwc_pcie: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 07/10] perf/hisi_pcie: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 05/10] perf/arm_dsu: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 04/10] perf/arm_cspmu: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 03/10] perf/arm-cmn: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 02/10] perf/alibaba_uncore_drw: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 00/10] perf: Avoid placing cpumask var on stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v2 01/10] cpumask: add cpumask_any_and_but()
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v7 3/5] clk: qcom: common: Add interconnect clocks support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 2/5] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND] arm64: defconfig: qcom: enable X1E80100 sound card
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Add basic support for LG G4 (H815)
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/6] drm/msm/dsi: support DSC configurations with slice_per_pkt > 1
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: Add basic support for LG G4 (H815)
  • From: Alexander Reimelt <alexander.reimelt@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: Add LG G4 (h815)
  • From: Alexander Reimelt <alexander.reimelt@xxxxxxxxx>
• [PATCH 0/2] arm64: Add basic support for LG H815
  • From: Alexander Reimelt <alexander.reimelt@xxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v7 5/5] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v7 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v7 3/5] clk: qcom: common: Add interconnect clocks support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v7 2/5] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH v7 0/5] Add interconnect driver for IPQ9574 SoC
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v3 3/6] drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WC (fix video mode DSC)
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/6] drm/msm/dsi: set video mode widebus enable bit when widebus is enabled
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/8] Move camss version related defs in to resources
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] drm/msm/dpu: fix video mode DSC for DSI
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Add DSC support to DSI video panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RESEND] arm64: defconfig: qcom: enable X1E80100 sound card
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/6] drm/display: Add slice_per_pkt for dsc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators
  • From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
• Re: [PATCH 23/34] firmware: qcom_scm: mark qcom_scm_qseecom_allowlist as __maybe_unused
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 6/6] drm/msm/dsi: support DSC configurations with slice_per_pkt > 1
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 5/6] drm/display: Add slice_per_pkt for dsc
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 4/6] drm/msm/dsi: add a comment to explain pkt_per_line encoding
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 3/6] drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WC (fix video mode DSC)
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 1/6] drm/msm/dpu: fix video mode DSC for DSI
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 2/6] drm/msm/dsi: set video mode widebus enable bit when widebus is enabled
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v3 0/6] Add DSC support to DSI video panel
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Specify zap region for gpu
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 23/34] firmware: qcom_scm: mark qcom_scm_qseecom_allowlist as __maybe_unused
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 00/34] address all -Wunused-const warnings
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v18 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 7/7] spmi: pmic-arb: Add multi bus support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v8 6/7] spmi: pmic-arb: Register controller for bus instead of arbiter
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v8 3/7] spmi: pmic-arb: Fix some compile warnings about members not being described
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v18 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3] mtd: rawnand: qcom: Fix broken misc_cmd_type in exec_op
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: qcom: ipq9574: add PCIe2 nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v18 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] mtd: rawnand: qcom: Fix broken misc_cmd_type in exec_op
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add sysfs entry to force device to enter EDL
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v18 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add Schneider Electric
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v4 4/4] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/4] drm/mipi-dsi: use correct return type for the DSC functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/4] drm/panel: add support for LG SW43408 panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Specify zap region for gpu
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: pmic_glink: notify clients about the current state
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] soc: qcom: pmic_glink: don't traverse clients list without a lock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] soc: qcom: pmic_glink: fix client handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: pmic_glink: don't traverse clients list without a lock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/9] perf/arm_dsu: Avoid explicit cpumask var allocation from stack
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION c0b832517f627ead3388c6f0c74e8ac10ad5774b
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/9] perf/arm_dsu: Avoid explicit cpumask var allocation from stack
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/3] wifi: ath10k: fix board file loading for wcn3990 devices
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v18 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3] mtd: rawnand: qcom: Fix broken misc_cmd_type in exec_op
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• sa8775p-ride: What's a normal SMMU TLB sync time?
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] drm/mipi-dsi: use correct return type for the DSC functions
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: qcom: ipq9574: add PCIe2 nodes
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 6/7] phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 5/7] dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 3/7] dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 4/7] PCI: qcom: Add support for IPQ9574
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 2/7] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH 1/7] dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: msm8996: Add missing UFS host controller reset
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] docs: submitting-patches: describe additional tags
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH 2/2] soc: qcom: pmic_glink: notify clients about the current state
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: pmic_glink: don't traverse clients list without a lock
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: msm8996: Add missing UFS host controller reset
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 2/2] soc: qcom: pmic_glink: notify clients about the current state
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] soc: qcom: pmic_glink: don't traverse clients list without a lock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] soc: qcom: pmic_glink: fix client handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] clk: qcom: smd-rpm: Restore msm8976 num_clk
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add sysfs entry to force device to enter EDL
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add sysfs entry to force device to enter EDL
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• Re: [PATCH 2/9] dma: Convert from tasklet to BH workqueue
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 7/9] s390: Convert from tasklet to BH workqueue
  • From: Alexandra Winter <wintera@xxxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: pmi8950: add pwm node
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 0/3] This patch series introduces support for PMI8950 PWM in leds-qcom-lpg.
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/9] dma: Convert from tasklet to BH workqueue
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 7/7] spmi: pmic-arb: Add multi bus support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 6/7] spmi: pmic-arb: Register controller for bus instead of arbiter
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 5/7] spmi: pmic-arb: Make core resources acquiring a version operation
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 4/7] spmi: pmic-arb: Make the APID init a version operation
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 3/7] spmi: pmic-arb: Fix some compile warnings about members not being described
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 2/7] dt-bindings: spmi: Deprecate qcom,bus-id
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 1/7] dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v8 0/7] spmi: pmic-arb: Add support for multiple buses
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v2 11/11] soc: qcom: pmic_glink: enable UCSI on sc8180x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/11] usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] perf/alibaba_uncore_drw: Avoid explicit cpumask var allocation from stack
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 08/11] usb: typec: ucsi_glink: rework quirks implementation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 07/11] usb: typec: ucsi: support delaying GET_PDOS for device
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 9/9] perf/thunder_x2: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 7/9] perf/hisi_uncore: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 8/9] perf/qcom_l2: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 1/9] perf/alibaba_uncore_drw: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 6/9] perf/hisi_pcie: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 3/9] perf/arm_cspmu: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 4/9] perf/arm_dsu: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 5/9] perf/dwc_pcie: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 2/9] perf/arm-cmn: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• [PATCH 0/9] perf: Avoid explicit cpumask var allocation from stack
  • From: Dawei Li <dawei.li@xxxxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: pervent access to suspended controller
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 07/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 06/11] usb: typec: ucsi: extract code to read PD caps
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] usb: typec: ucsi: simplify partner's PD caps registration
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/11] usb: typec: ucsi: always register a link to USB PD device
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 5/6] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 1/6] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 0/6] Add interconnect driver for IPQ9574 SoC
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 9/9] mmc: Convert from tasklet to BH workqueue
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v1 2/2] ASoC: qcom: qcm6490: Add machine driver for qcm6490
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v2 0/2] Enable various remoteprocs for qcm6490-idp and qcs6490-rb3gen2
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v7 5/6] spmi: pmic-arb: Register controller for bus instead of arbiter
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v7 3/6] spmi: pmic-arb: Make the APID init a version operation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: qcom: Add rx margining settings for gen4
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 2/3] PCI: qcom: Add equalization settings for gen4
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 1/3] PCI: qcom: Refactor common code
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 04/11] scsi: ufs: qcom: Perform read back after writing unipro mode
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 03/11] scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add sysfs entry to force device to enter EDL
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/4] arm64: dts: fix several display-related schema warnings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: fix several display-related schema warnings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/4] drm/mipi-dsi: use correct return type for the DSC functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/4] drm/panel: add support for LG SW43408 panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] Move camss version related defs in to resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/8] media: qcom: camss: Add per sub-device type resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add sy7802 flash led driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add sy7802 flash led driver
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v2 0/3] Add sy7802 flash led driver
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH] drm: ci: fix the xfails for apq8016
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/9] arm64: dts: qcom: fix description of the Type-C signals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] phy: qcom-qmp-ufs: Fix PHY QMP clocks for SC7180
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: msm8976: Add IOMMU nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v2 0/4] MSM8976 MDSS/GPU/WCNSS support
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 1/1] clk: qcom: smd-rpm: Restore msm8976 num_clk
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 07/11] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: allow voltage swing / pre emphasis of 3
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] docs: submitting-patches: describe additional tags
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 09/10] PCI: epf-test: Handle Link Down event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 08/10] PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 07/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 06/10] PCI: endpoint: Introduce EPC 'deinit' event and notify the EPF drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 05/10] PCI: epf-{mhi/test}: Move DMA initialization to EPC init callback
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 04/10] PCI: epf-test: Refactor pci_epf_test_unbind() function
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 01/10] PCI: qcom-ep: Disable resources unconditionally during PERST# assert
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sm8150: Add video clock controller node
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v2 0/2] Add DT support for video clock controller on SM8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 1/3] bus: mhi: host: add mhi_power_down_keep_dev()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw()
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 RESEND 3/4] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 RESEND 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v8 0/3] Add support for vibrator in multiple PMICs
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH v8 2/3] dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH] docs: submitting-patches: describe additional tags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 18/18] drm/msm: drop A6xx header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 12/18] drm/msm: drop display-related headers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 14/18] drm/msm: drop A3xx and A4xx headers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 07/18] drm/msm: import A2xx-A4xx XML display registers database
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 13/18] drm/msm: drop A2xx and common headers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 15/18] drm/msm: drop A5xx header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 09/18] drm/msm: import A6xx XML display registers database
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 16/18] drm/msm: drop A6xx GMU header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 17/18] drm/msm: drop C++ parts of a6xx.xml.h
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 08/18] drm/msm: import A5xx XML display registers database
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 06/18] drm/msm: import XML display registers database
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 11/18] drm/msm: generate headers on the fly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 10/18] drm/msm: import gen_header.py script from Mesa
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 05/18] drm/msm: remove dependencies from core onto adreno headers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 03/18] drm/msm/dsi: drop mmss_cc.xml.h
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 04/18] drm/msm: move msm_gpummu.c to adreno/a2xx_gpummu.c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 02/18] drm/msm/hdmi: drop qfprom.xml.h
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 01/18] drm/msm/mdp5: add writeback block bases
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 00/18] drm/msm: generate register header files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] arm64: dts: qcom: sm8650: add GPU nodes
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sm8650-qrd: enable GPU
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• [PATCH v4 0/2] rtc-pm8xxx: fix rtc alarm which fired before driver probe not be cleard
  • From: jianbin zhang <quic_jianbinz@xxxxxxxxxxx>
• [PATCH V4 2/2] rtc-pm8xxx: Correct the value written into the PM8xxx_RTC_ALARM_CLEAR
  • From: jianbin zhang <quic_jianbinz@xxxxxxxxxxx>
• [PATCH V4 1/2] rtc-pm8xxx: clear the triggered alarm interrupt during driver probe
  • From: jianbin zhang <quic_jianbinz@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/bridge: adv7511: make it honour next bridge in DT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5
  • From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
  • From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
• [PATCH v3 0/2] Samsung Galaxy Z Fold5 initial support
  • From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: qcom: Add CAMCC clocks for SM4450
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: qcom: x1e80100: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 5/7] arm64: dts: qcom: sc8280xp: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/7] arm64: dts: qcom: sc8180x: describe USB signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/7] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/7] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/7] arm64: dts: qcom: sm8250: describe HS signals properly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/7] clk: qcom: Add CAMCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: msm8916/8216-samsung-fortuna: Add samsung,fortuna binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 5/7] clk: qcom: Add CAMCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 4/7] dt-bindings: clock: qcom: Add CAMCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 0/7] clk: qcom: Add support for DISPCC, CAMCC and GPUCC on SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/3] drm/panel: add support for LG SW43408 panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/5] LLCC: Support for Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: pm6150: correct Type-C compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: pm6150: correct Type-C compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• Re: [PATCH 0/3] wifi: ath10k: fix board file loading for wcn3990 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] drm/panel: add support for LG SW43408 panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: allow voltage swing / pre emphasis of 3
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v18 00/41] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: allow voltage swing / pre emphasis of 3
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v4 3/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v4 4/5] arm64: dts: qcom: sm8550: Add Broadcast_AND register in LLCC block
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: sm8650: Add Broadcast_AND register in LLCC block
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v4 0/5] LLCC: Support for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 06/11] scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 1/7] dt-bindings: iommu: Add Qualcomm TBU
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 3/7] iommu/arm-smmu: Allow using a threaded handler for context interrupts
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 4/7] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 0/7] Add support for Translation Buffer Units
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v7 6/7] iommu/arm-smmu-qcom: Use the custom fault handler on more platforms
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 09/11] scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 08/11] scsi: ufs: core: Perform read back after disabling interrupts
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 07/11] scsi: ufs: core: Perform read back after writing UTP_TASK_REQ_LIST_BASE_H
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 06/11] scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 05/11] scsi: ufs: qcom: Perform read back after writing CGC enable
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 04/11] scsi: ufs: qcom: Perform read back after writing unipro mode
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 03/11] scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 01/11] scsi: ufs: qcom: Perform read back after writing reset bit
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 00/11] scsi: ufs: Remove overzealous memory barriers
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH] firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v12 8/8] PCI: endpoint: Remove "core_init_notifier" flag
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v12 7/8] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v7 5/6] spmi: pmic-arb: Register controller for bus instead of arbiter
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 4/6] spmi: pmic-arb: Make core resources acquiring a version operation
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 3/6] spmi: pmic-arb: Make the APID init a version operation
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 2/6] dt-bindings: spmi: Deprecate qcom,bus-id
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 1/6] dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v7 0/6] spmi: pmic-arb: Add support for multiple buses
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH] drm/msm: fix the `CRASHDUMP_READ` target of `a6xx_get_shader_block()`
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] ASoC: qcom: qcm6490: Add machine driver for qcm6490
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] phy/qcom-qmp-combo: propagate correct return value at phy_power_on()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFT 3/7] phy: qcom: qmp-combo: introduce QPHY_MODE
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2] phy/qcom-qmp-combo: propagate correct return value at phy_power_on()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 2/9] dma: Convert from tasklet to BH workqueue
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/9] dma: Convert from tasklet to BH workqueue
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH RESEND v6 3/5] spmi: pmic-arb: Make the APID init a version operation
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v5] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v1 2/2] ASoC: qcom: qcm6490: Add machine driver for qcm6490
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v10 1/3] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: Remove now unused connector_type from desc
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v10 0/3] arm64: qcom: sa8775p: add support for EP PCIe
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v10 3/3] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v10 2/3] PCI: qcom-ep: Add support for SA8775P SOC
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: display: panel: visionox, vtdr6130: Add mode property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 27/75] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 05/52] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 26/75] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 25/75] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 06/75] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 07/75] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 39/98] arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 38/98] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 37/98] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 33/98] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 13/98] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 12/98] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 11/98] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 08/98] scsi: ufs: qcom: Avoid re-init quirk when gears match
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 24/52] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 23/52] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 22/52] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators
  • From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
• [PATCH AUTOSEL 6.8 35/68] arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 34/68] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 33/68] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 32/68] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 29/68] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 16/68] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 13/68] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 06/68] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: pm7250b: Add a TCPM description
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/3] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/3] Add TCPM support for PM7250B and Fairphone 4
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/4] Add USB Support on Qualcomm's QDU/QRU1000 Platform
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM8475 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/4] Add USB Support on Qualcomm's QDU/QRU1000 Platform
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v5 3/5] clk: qcom: common: Add interconnect clocks support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5
  • From: Alexandru Serdeliuc <serdeliuk@xxxxxxxxx>
• Re: [PATCH 1/2] V2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5
  • From: Alexandru Serdeliuc <serdeliuk@xxxxxxxxx>
• Re: [PATCH 2/4] coresight: Add support for multiple output ports on the funnel
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/3] DisplayPort support for SM6350/SM7225
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: display: msm: dp-controller: document SM6350 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5
  • From: Alexandru Serdeliuc <serdeliuk@xxxxxxxxx>
• [PATCH v2 08/11] usb: typec: ucsi_glink: rework quirks implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/11] usb: typec: ucsi: extract code to read PD caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/11] soc: qcom: pmic_glink: enable UCSI on sc8180x
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/11] usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/11] soc: qcom: pmic_glink: reenable UCSI on sc8280xp
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/11] usb: typec: ucsi: support delaying GET_PDOS for device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/11] usb: typec: ucsi: simplify partner's PD caps registration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/11] usb: typec: ucsi: always register a link to USB PD device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/11] usb: typec: ucsi: properly register partner's PD device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/11] usb: typec: ucsi: limit the UCSI_NO_PARTNER_PDOS even further
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/11] usb: typec: ucsi: allow non-partner GET_PDOS for Qualcomm devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/11] usb: typec: ucsi: fix several issues manifesting on Qualcomm platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: Remove now unused connector_type from desc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB
  • From: "Maulik Shah (mkshah)" <quic_mkshah@xxxxxxxxxxx>