[PATCH v3 3/3] ARM: dts: qcom: pma8084: add pon node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wrap existing pwrkey node inside a pon node, to conform to dt schema.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/pma8084.dtsi | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
index 2985f4805b93..309f5256754b 100644
--- a/arch/arm/boot/dts/qcom/pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -19,12 +20,17 @@ rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
+		pon@800 {
+			compatible = "qcom,pm8941-pon";
 			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
 		};
 
 		pma8084_gpios: gpio@c000 {

-- 
2.45.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux