Add pm8950 resin node as a feature of the PMIC it should be declared
in pm8950.dtsi, disabled by default. Like all other optional components
it can then by enabled and configured in the board-specific device tree
part.
Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8950.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index f03095779de0..ed72c6101813 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -18,7 +18,7 @@ pmic@0 {
#address-cells = <1>;
#size-cells = <0>;
- pon@800 {
+ pm8950_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
mode-bootloader = <0x2>;
@@ -31,6 +31,14 @@ pwrkey {
bias-pull-up;
linux,code = <KEY_POWER>;
};
+
+ pm8950_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
pm8950_temp: temp-alarm@2400 {
---
base-commit: cd19ac2f903276b820f5d0d89de0c896c27036ed
change-id: 20240730-pm8950_resin-aa33ac58621f
Best regards,
--
Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
