Re: [PATCH v2 2/2] PCI: qcom-ep: Add HDMA support for QCS9100 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/10/2024 6:40 PM, Aiqun Yu (Maria) wrote:


On 7/10/2024 12:26 AM, Bjorn Helgaas wrote:
On Tue, Jul 09, 2024 at 10:53:44PM +0800, Tengfei Fan wrote:
QCS9100 SoC supports the new Hyper DMA (HDMA) DMA Engine inside the DWC IP,
so add support for it by passing the mapping format and the number of
read/write channels count.

The PCIe EP controller used on this SoC is of version 1.34.0, so a separate
config struct is introduced for the sake of enabling HDMA conditionally.

This patch doesn't add a new config struct.

It should be noted that for the eDMA support (predecessor of HDMA), there
are no mapping format and channels count specified. That is because eDMA
supports auto detection of both parameters, whereas HDMA doesn't.

QCS9100 is drived from SA8775p. Currently, both the QCS9100 and SA8775p
platform use non-SCMI resource. In the future, the SA8775p platform will
move to use SCMI resources and it will have new sa8775p-related device
tree. Consequently, introduce "qcom,qcs9100-pcie-ep" to the PCIe device
match table.

This series doesn't add the new SCMI stuff you mention.  It sounds
like this should be deferred and added when you actually move to using
SCMI resources.

We can rename "sa8775p" to "qcs9100" compatible name in next patchset
for this driver. Let's know if this is reasonable from your point of view?

SCMI resource solution will come in a later point, and at that time it
can have scmi related resource operations in this driver and add
"sa8775p" compatible with correct resources ops at that time.

More background:
We want to make QCS9100 non-SCMI resources not blocking by current SCMI
resources changes, since SCMI changes are also pending to merge in order
to not blocking non-scmi resource platforms like current QCS9100
project. So the splitting base device trees are pending here. Don't want
to have a circular dependency loop. :)

After considering the feedback provided on the subject, We have decided
to keep current SA8775p compatible and ABI compatibility in drivers.
Let's close this session and ignore all the current patches here.
Thank you for your input.


Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
  1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 236229f66c80..e2775f4ca7ee 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -904,6 +904,7 @@ static const struct qcom_pcie_ep_cfg cfg_1_34_0 = {
  };
static const struct of_device_id qcom_pcie_ep_match[] = {
+	{ .compatible = "qcom,qcs9100-pcie-ep", .data = &cfg_1_34_0},
  	{ .compatible = "qcom,sa8775p-pcie-ep", .data = &cfg_1_34_0},
  	{ .compatible = "qcom,sdx55-pcie-ep", },
  	{ .compatible = "qcom,sm8450-pcie-ep", },

--
2.25.1



--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux