The Pro1X has a flip keyboard and a single-state camera button.
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 34 +++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 4a30024aa48f..70f479a63f2e 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (c) 2023, Dang Huynh <danct12@xxxxxxxxxx>
+ * Copyright (c) 2023 - 2024, Dang Huynh <danct12@xxxxxxxxxx>
*/
/dts-v1/;
@@ -35,9 +35,25 @@ framebuffer0: framebuffer@5c000000 {
gpio-keys {
compatible = "gpio-keys";
- pinctrl-0 = <&vol_up_n>;
+ pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
pinctrl-names = "default";
+ hall-switch {
+ label = "Hall Switch";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <90>;
+ wakeup-source;
+ };
+
+ key-camera {
+ label = "Camera Button";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
@@ -212,6 +228,20 @@ &sleep_clk {
&tlmm {
gpio-reserved-ranges = <0 4>, <14 4>;
+
+ key_camera_n: key-camera-n-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hall_sensor_n: hall-sensor-n-state {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
&ufs_mem_hc {
--
2.46.0
