Add device node for camera clock controller on Qualcomm
SM8150 platform.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8155p.dtsi | 4 ++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 13 +++++++++++++
2 files changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
index 9e70effc72e1..d678ed822378 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -9,6 +9,10 @@
#include "sm8150.dtsi"
+&camcc {
+ power-domains = <&rpmhpd SA8155P_CX>;
+};
+
&dispcc {
power-domains = <&rpmhpd SA8155P_CX>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 3e236adb9397..27f87835bc55 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -17,6 +17,7 @@
#include <dt-bindings/clock/qcom,videocc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/clock/qcom,sm8150-camcc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -3759,6 +3760,18 @@ camnoc_virt: interconnect@ac00000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sm8150-camcc";
+ reg = <0 0x0ad00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8150-mdss";
reg = <0 0x0ae00000 0 0x1000>;
--
2.25.1
