Fxtec Pro1X has two card slots and allow either 2xSIM cards or
1xSIM, 1xSD Card configuration.
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 32 +++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 7c3a7bb8df8f..e1e66fe54295 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -191,6 +191,7 @@ pm6125_l4a: l4 {
pm6125_l5a: l5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3056000>;
+ regulator-allow-set-load;
};
pm6125_l6a: l6 {
@@ -292,6 +293,37 @@ pm6125_l24a: l24 {
};
};
+&sdc2_state_off {
+ cd-pins {
+ pins = "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_state_on {
+ cd-pins {
+ pins = "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&pm6125_l22a>;
+ vqmmc-supply = <&pm6125_l5a>;
+
+ status = "okay";
+};
+
&sleep_clk {
clock-frequency = <32764>;
};
--
2.45.2
