[PATCH v2 11/11] arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable onboard Wi-Fi on the F(x)tec Pro1X.

For reference, HW/SW identifies as:
qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
qmi fw_version 0x324103d6 fw_build_timestamp 2021-12-02 08:20
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.4-00982-QCAHLSWMTPLZ-1

Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 3f6676edc9a7..2ef2733bff48 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -536,6 +536,17 @@ &usb_qmpphy_out {
 	remote-endpoint = <&pmi632_ss_in>;
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
+	vdd-1.8-xo-supply = <&pm6125_l16a>;
+	vdd-1.3-rfa-supply = <&pm6125_l17a>;
+	vdd-3.3-ch0-supply = <&pm6125_l23a>;
+
+	qcom,ath10k-calibration-variant = "Fxtec_QX1050";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

-- 
2.45.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux