[PATCH 5/6] ASoC: codecs: wsa883x: Correct Soundwire ports mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.

Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().

Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Not adding Cc-stable because I don't think the issue can lead to real
out-of-bounds read.
---
 sound/soc/codecs/wsa883x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
index d0ab4e2290b6..3e4fdaa3f44f 100644
--- a/sound/soc/codecs/wsa883x.c
+++ b/sound/soc/codecs/wsa883x.c
@@ -1406,7 +1406,7 @@ static int wsa883x_probe(struct sdw_slave *pdev,
 					WSA883X_MAX_SWR_PORTS))
 		dev_dbg(dev, "Static Port mapping not specified\n");
 
-	pdev->prop.sink_ports = GENMASK(WSA883X_MAX_SWR_PORTS, 0);
+	pdev->prop.sink_ports = GENMASK(WSA883X_MAX_SWR_PORTS - 1, 0);
 	pdev->prop.simple_clk_stop_capable = true;
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
 	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux