Linux Host Access Point
[Prev Page][Next Page]
- Re: [PATCH 3/6] dpp_pkex: EC point mul w/ value < prime
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/6] tests/hwsim: check_imsi_support helper func
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 2/6] add NULL checks (encountered during tests/hwsim)
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- Re: [PATCH 3/6] dpp_pkex: EC point mul w/ value < prime
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- Re: [PATCH 3/6] dpp_pkex: EC point mul w/ value < prime
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 2/6] add NULL checks (encountered during tests/hwsim)
- From: Jouni Malinen <j@xxxxx>
- Re: Add hw mode config for 80211ah
- From: Jouni Malinen <j@xxxxx>
- Re: "Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs" breaks build on older OSs.
- From: Jouni Malinen <j@xxxxx>
- Re: Can't build using `CFLAGS="-DCONFIG_DEBUG_SYSLOG -DCONFIG_IEEE80211AC" make`
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wpa_passphrase: Encode non-ascii SSID in hex
- From: Jouni Malinen <j@xxxxx>
- Re: "Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs" breaks build on older OSs.
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Re: "Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs" breaks build on older OSs.
- From: David Benjamin <davidben@xxxxxxxxxx>
- "Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs" breaks build on older OSs.
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Can't build using `CFLAGS="-DCONFIG_DEBUG_SYSLOG -DCONFIG_IEEE80211AC" make`
- From: Opty <opty77@xxxxxxxxx>
- RE: [EXT] [RESEND PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH] wpa_passphrase: Encode non-ascii SSID in hex
- From: Jörn Bethune <bethune+hostap@xxxxxxxxx>
- Use LOG_PID in main.c's openlog()
- From: Opty <opty77@xxxxxxxxx>
- Complete usage() and update hostapd.8
- From: Opty <opty77@xxxxxxxxx>
- Add hw mode config for 80211ah
- From: JUN-KYU SHIN <jk.shin@xxxxxxxxxxxx>
- [PATCH 6/6] tlsv1: fix unsigned int underflow in internal tls
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH 5/6] update tls_connection_set_verify() tls.h comment
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH 4/6] DPP: fix memleak of intro.peer_key
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH 2/6] add NULL checks (encountered during tests/hwsim)
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH 3/6] dpp_pkex: EC point mul w/ value < prime
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH 1/6] tests/hwsim: check_imsi_support helper func
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- [PATCH v2] wpa:change state to AUTHENTICATING after trigger external_auth ok
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- Re: Option to set interface to 4-addr mode
- From: Konstantinos Natsakis <infradead.org@xxxxxxxxxxx>
- [PATCH v2] dbus: Add virtual interface create/remove logic to be inline with ctrl_iface
- From: Jintao Lin <jintaolin@xxxxxxxxxxxx>
- Re: [RESEND PATCH] systemd: Use interface name in description of interface-specific units
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/2] Fix external passwords with 4-way handshake offloading
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wolfSSL: Add support for DPP and EAP-TEAP/EAP-FAST
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- Re: [PATCH] CHROMIUM: dbus: Add virtual interface create/remove logic to be inline with ctrl_iface
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v4 00/13] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v3] Add option to disable SAE key_mgmt without PMF
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v2] dbus: apply PMK properties immediately
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] sae-pk: crypto_ec_key_get_subject_public_key expected to produce compressed fmt
- From: Jouni Malinen <j@xxxxx>
- Re: Option to set interface to 4-addr mode
- From: Jouni Malinen <j@xxxxx>
- Re: [EXT] [RESEND PATCH] Issue: Non-HE capable interface advertising HE
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] p2p: discount current op freq
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Fix drop connection attempt issue when attempting to reconnect same bss,ess.
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: SAE check confirm fail status code
- From: Jouni Malinen <j@xxxxx>
- [PATCH] p2p: discount current op freq
- From: Matthew Wang <matthewmwang@xxxxxxxxxxxx>
- [PATCH] Fix drop connection attempt issue when attempting to reconnect same bss,ess.
- From: 김우용 <wykim@xxxxxxxxxxxx>
- [PATCH] Fix drop connection attempt issue when attempting to reconnect same bss,ess.
- From: 김우용 <wykim@xxxxxxxxxxxx>
- [PATCH] CHROMIUM: dbus: Add virtual interface create/remove logic to be inline with ctrl_iface
- From: Jintao Lin <jintaolin@xxxxxxxxxxxx>
- Re: Running hostapd on Pi 4, slow to connect, many associated/disassociated messages
- From: Chris Green <cl@xxxxxxxx>
- [PATCH v4 13/13] MLD STA: Indicate supplicant MLO support to driver's SME
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 12/13] MLD STA: Add PMKSA entries with both AP MLD address and AP link addresses
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 11/13] MLD STA: Add support for SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 10/13] MLD STA: Add support for group rekeying
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 09/13] MLD STA: Use AP MLD address as destination for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 08/13] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 06/13] MLD STA: Add support to configure keys with MLO link ID
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 07/13] MLD STA: Add support for processing EAPOL 3/4 frame
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 05/13] MLD STA: Configure pairwise keys using AP MLD address
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 02/13] MLD STA: set MLO connection info to wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 04/13] MLD STA: Use AP MLD address to derive pairwise keys
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 00/13] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 03/13] MLD STA: Add MLO KDEs for 2/4 and 4/4 EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v4 01/13] nl80211: Get all requested MLO links information from (re)association events
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: Running hostapd on Pi 4, slow to connect, many associated/disassociated messages
- From: Jan Ceuleers <jan.ceuleers@xxxxxxxxx>
- Running hostapd on Pi 4, slow to connect, many associated/disassociated messages
- [PATCH] Load OpenSSL 3.0 legacy provider but let default be loaded
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- RE: [PATCH] Use ANSI formulation of variardic macros, MSVC can't build with GCC formulation
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- RE: [PATCH] use ANSI formulation of variardic macros, MSVC can't build with GCC formulation
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- RE: [PATCH] Win32 use BCryptGenRandom to ensure the CNG FIPS RNG is used
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- RE: [PATCH] obey CONFIG_DEBUG_NO_STDOUT in wpa_debug.c
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- Re: [PATCH v3 00/21] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v3 07/21] wpa_debug: Add utility functions for printing MLO link ID in hexdump
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] RADIUS: Add Filter-Id attribute
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] obey CONFIG_DEBUG_NO_STDOUT in wpa_debug.c
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Win32 use BCryptGenRandom to ensure the CNG FIPS RNG is used
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] use ANSI formulation of variardic macros, MSVC can't build with GCC formulation
- From: Jouni Malinen <j@xxxxx>
- [PATCH] Enable MACsec HW offload in driver_macsec_linux if supported
- From: Benny Lønstrup Ammitzbøll <benny@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Patch to support MACsec HW offload
- From: Jouni Malinen <j@xxxxx>
- Re: Patch to support MACsec HW offload
- From: Benny Lønstrup Ammitzbøll <benny@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Patch to support MACsec HW offload
- From: Jouni Malinen <j@xxxxx>
- Re: Patch to support MACsec HW offload
- From: Benny Lønstrup Ammitzbøll <benny@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Patch to support MACsec HW offload
- From: Jan Ceuleers <jan.ceuleers@xxxxxxxxx>
- Patch to support MACsec HW offload
- From: Benny Lønstrup Ammitzbøll <benny@xxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v3] Add option to disable SAE key_mgmt without PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- Hotspot 2.0 Android implementation on Samsung devices
- From: work vlpl <thework.vlpl@xxxxxxxxx>
- [PATCH] EAP server: Fix description of RADIUS attributes
- From: Morten Brørup <mb@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] RADIUS: Add Filter-Id attribute
- From: Morten Brørup <mb@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] hostapd: SAE check confirm fail status code
- From: Mert Ekren <mert.ekren@xxxxxxxxxxx>
- [PATCH v3 21/21] MLD STA: Use MLD addresses for sending non-public action frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 20/21] MLD STA: Indicate supplicant MLO support to driver's SME
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 19/21] MLD STA: Add PMKSA entries with both AP MLD address and AP link addresses
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 18/21] MLD STA: Add support for SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 17/21] MLD STA: Add support to process M1 received before association event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 16/21] MLD STA: Add support for group rekeying
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 15/21] MLD STA: Use AP MLD address as destination for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 14/21] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 13/21] MLD STA: Add support for processing EAPOL 3/4 frame
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 12/21] MLD STA: Add support to configure keys with MLO link ID
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 11/21] MLD STA: Configure pairwise keys using AP MLD address
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 10/21] MLD STA: Use AP MLD address to derive pairwise keys
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 06/21] EHT: Add definitions for STA Control fields of Basic Multi-Link element
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 09/21] MLD STA: Add MLO KDEs for 2/4 and 4/4 EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 08/21] MLD STA: set MLO connection info to wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 05/21] EHT: Add support for Multi-Link element defragmentation
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 07/21] wpa_debug: Add utility functions for printing MLO link ID in hexdump
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 03/21] EHT: Add support to parse Multi-Link elements
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 04/21] common: Refactor element defragmentation
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 00/21] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 01/21] nl80211: Add support to parse MLO link status info in NL80211_CMD_CONNECT
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3 02/21] MLD STA: Fetch MLO assoc link ID info to core wpa_supplicant
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: [PATCH] Do not use SAE key_mgmt without PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- [PATCH v2] Add option to disable SAE key_mgmt without PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- Re: [PATCH] Do not use SAE key_mgmt without PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- Re: Configure hostapd with separate dhcp_server - Error: unknown configuration item "dhcp_server"
- From: Nicolas Cavallari <nicolas.cavallari@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Configure hostapd with separate dhcp_server - Error: unknown configuration item "dhcp_server"
- From: Bart Smink <bartsmink@xxxxxxxxx>
- Re: [PATCH] p2p: get cached scan results on iface creation to avoid scan
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Do not use SAE key_mgmt without PMF
- From: Jouni Malinen <j@xxxxx>
- Configure hostapd with separate dhcp_server - Error: unknown configuration item "dhcp_server"
- From: Dan Hayes <dhayes501@xxxxxxxxx>
- Resend: hostap option to use mbedtls
- From: gs-lists-hostap@xxxxxxxxxxxxx
- Re: [PATCH v2 13/17] MLD STA: Add support for group rekeying
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: [PATCH v2 16/17] MLD STA: Store AP MLD address in PMKSA entries
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: [PATCH v2 05/17] MLD STA: set MLO connection info to wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: [PATCH v2 01/17] EHT: Add definitions for STA Control fields of Basic Multi-Link element
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Option to set interface to 4-addr mode
- From: Konstantinos Natsakis <infradead.org@xxxxxxxxxxx>
- [PATCH] Don't provide implementation of DES/RC4 if CONFIG_FIPS
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- [PATCH] obey CONFIG_DEBUG_NO_STDOUT in wpa_debug.c
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- [PATCH] Win32 use BCryptGenRandom to ensure the CNG FIPS RNG is used
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- [PATCH] Load OpenSSL 3.0 legacy provider but let default be loaded only if necessary by fallback
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- [PATCH] use ANSI formulation of variardic macros, MSVC can't build with GCC formulation
- From: Norman Hamer <NHamer@xxxxxxxxxxxx>
- Re: [PATCH 1/8] wifi: wilc1000: fix incorrect type assignment sparse warning
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/8] wifi: wilc1000: fix incorrect type assignment sparse warning
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/8] wifi: wilc1000: fix incorrect type assignment sparse warning
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] p2p: get cached scan results on iface creation to avoid scan
- From: Matthew Wang <matthewmwang@xxxxxxxxxxxx>
- [PATCH] Do not use SAE key_mgmt without PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH] Issue: Non-HE capable interface advertising HE IEs
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- Re: FILS Rapid Commit option
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- Re: server.pem has expired
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- 802.11r FT authentication with FullMAC driver
- From: Bart Smink <bartsmink@xxxxxxxxx>
- Re: [PATCH] AP: Do not include HE related IE in assoc rsp if receiving invalid HE capa IE
- From: Jouni Malinen <j@xxxxx>
- SSID length handling
- From: Gwendolyn Scharkowski <bav7408@xxxxxxxxxxxxxxxxxxxxxx>
- Re: is there a way to run hostapd as non -root user ?
- From: Jouni Malinen <j@xxxxx>
- FILS Rapid Commit option
- From: "t-urushi@xxxxxxxxxxx" <t-urushi@xxxxxxxxxxx>
- [PATCH] AP: Do not include HE related IE in assoc rsp if receiving invalid HE capa IE
- From: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx>
- [PATCH] sae-pk: crypto_ec_key_get_subject_public_key expected to produce compressed fmt
- From: Glenn Strauss <gstrauss@xxxxxxxxxxxxx>
- server.pem has expired
- From: "t-urushi@xxxxxxxxxxx" <t-urushi@xxxxxxxxxxx>
- RE: [PATCH v2 11/17] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 13/17] MLD STA: Add support for group rekeying
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 16/17] MLD STA: Store AP MLD address in PMKSA entries
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 06/17] MLD STA: Add MLO KDEs for 2/4 and 4/4 EAPOL frames
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 03/17] EHT: Add support for Multi-Link element defragmentation
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 10/17] MLD STA: Add support for processing EAPOL 3/4 frame
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 05/17] MLD STA: set MLO connection info to wpa_sm
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2 01/17] EHT: Add definitions for STA Control fields of Basic Multi-Link element
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH v2] dbus: apply PMK properties immediately
- From: Beniamino Galvani <bgalvani@xxxxxxxxxx>
- is there a way to run hostapd as non -root user ?
- From: Branko <brankob@xxxxxxxxxxxxxx>
- [PATCH v2 17/17] MLD STA: Indicate supplicant MLO support to driver's SME
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 16/17] MLD STA: Store AP MLD address in PMKSA entries
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 15/17] MLD STA: Add support for SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 14/17] MLD STA: Add support to process M1 received before association event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 13/17] MLD STA: Add support for group rekeying
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 12/17] MLD STA: Use AP MLD address as destination for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 11/17] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 10/17] MLD STA: Add support for processing EAPOL 3/4 frame
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 09/17] MLD STA: Add support to configure keys with MLO link ID
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 08/17] MLD STA: Configure pairwise keys using AP MLD address
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 07/17] MLD STA: Use AP MLD address to derive pairwise keys
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 03/17] EHT: Add support for Multi-Link element defragmentation
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 05/17] MLD STA: set MLO connection info to wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 06/17] MLD STA: Add MLO KDEs for 2/4 and 4/4 EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 02/17] EHT: Add support to parse Multi-Link elements
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 04/17] MLD STA: Fetch MLO assoc link ID info to core wpa_supplicant
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 01/17] EHT: Add definitions for STA Control fields of Basic Multi-Link element
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 00/17] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: [RESEND PATCH] Update PMK parameters in WPA state machine before association
- From: Beniamino Galvani <bgalvani@xxxxxxxxxx>
- Re: [PATCH v3] Add support for parsing MLO connection info from roam+auth event
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v3] MLD STA: Add support for parsing MLO KDEs
- From: Jouni Malinen <j@xxxxx>
- [EXT] [RESEND PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- Re: [RESEND PATCH] Update PMK parameters in WPA state machine before association
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Only allow OWE and SAE H2E on 6 Ghz
- From: Jouni Malinen <j@xxxxx>
- [PATCH] Add macsec_nv driver wrapper
- From: Mahesh Patil <maheshp@xxxxxxxxxx>
- [RESEND PATCH] systemd: Use interface name in description of interface-specific units
- From: Gioele Barabucci <gioele@xxxxxxxxx>
- Re: wpa_supplicant can´t connect to wpa2/tkip wifi with empty real essid
- From: Elmar Stellnberger <estellnb@xxxxxxxxxx>
- Re: wpa_supplicant can´t connect to wpa2/tkip wifi with empty real essid
- From: Elmar Stellnberger <estellnb@xxxxxxxxxx>
- Re: hostap option to use mbedtls (under development)
- From: krishna t <krish271828@xxxxxxxxx>
- [RESEND PATCH] Update PMK parameters in WPA state machine before association
- From: Beniamino Galvani <bgalvani@xxxxxxxxxx>
- [PATCH v3] Add support for parsing MLO connection info from roam+auth event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- wpa_supplicant can´t connect to wpa2/tkip wifi with empty real essid
- From: Elmar Stellnberger <estellnb@xxxxxxxxxx>
- Re: hostap option to use mbedtls (under development)
- From: gs-lists-hostap@xxxxxxxxxxxxx
- Re: PATCH: Don't close DPP TCP connection for duplicate Presence Announcements
- From: Eliot Lear <lear@xxxxxxx>
- Re: [PATCH] Only allow OWE and SAE H2E on 6 Ghz
- From: Nicolas Cavallari <Nicolas.Cavallari@xxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] Only allow OWE and SAE H2E on 6 Ghz
- From: Zhao Chen <zhao.chen@xxxxxxxxxxxx>
- Re: hostap option to use mbedtls (under development)
- From: krishna t <krish271828@xxxxxxxxx>
- Re: [PATCHv2] EAP-TEAP: like EAP-FAST, reverse the order of the MS-MPPE keys
- From: "Alexander Clouter" <alex+hostapd@xxxxxxxxxxx>
- [PATCH v2] Add support for parsing MLO connection info from roam+auth event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- RE: [PATCH v2] MLD STA: Add support for parsing MLO KDEs
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Linux hosts reauthenticating every minute
- From: Orion Poplawski <orion@xxxxxxxx>
- [PATCH 1/2] Fix external passwords with 4-way handshake offloading
- From: Ben Wolsieffer <benwolsieffer@xxxxxxxxx>
- [PATCH 2/2] SAE: Fix loading password from external database
- From: Ben Wolsieffer <benwolsieffer@xxxxxxxxx>
- Re: [PATCH] dbus: Omit FT key mgmt capabilities without CONFIG_IEEE80211R
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] dbus: Fix property DebugShowKeys and DebugTimestamp
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wpa_supplicant man page missing -I flag
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] acs: don't select indoor channel on outdoor operation
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/1] Use a less generic name for IEEE802.11 CRC-32 routine
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] ACS: include frequency in info messages
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] tests: hwsim: search for UBSAN in kernel messages
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] tests: vm: simplify parameter passing
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostap: RNR Bssid is empty
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Add usage print for -q flag
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] tests: reload correct regdb if possible/needed
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v2 00/17] MLD STA: Add support for open MLO connection when driver's SME in use
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v2] MLD STA: Add support for parsing MLO KDEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3] MLD STA: Add support for parsing MLO KDEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v3] HS20: support credentials with multiple home OIs
- From: Damien Dejean <damiendejean@xxxxxxxxxxxx>
- Re: [PATCH v2 17/17] Add support for parsing MLO connection info from roam+auth event
- From: Jouni Malinen <j@xxxxx>
- SET_NEIGHBOR only with RRM enabled?
- From: James Prestwood <prestwoj@xxxxxxxxx>
- hostap option to use mbedtls (under development)
- From: gs-lists-hostap@xxxxxxxxxxxxx
- [PATCH v2] HS20: support credentials with multiple home OIs
- From: Damien Dejean <damiendejean@xxxxxxxxxxxx>
- [PATCH] wpa_supplicant man page missing -I flag
- From: Robert Hernandez <rob@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH 09/12] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 08/12] MLD STA: Add support for processing EAPOL 3/4 frame
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 07/12] MLD STA: Add support to configure keys with MLO link ID param
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 06/12] MLD STA: Configure pairwise keys using MLD address
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 05/12] MLD STA: Derive pairwise keys using MLD address
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 03/12] MLD STA: Add support to fetch per-link beacon WPA/RSN/RSNX IEs into wpa_sm
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH 02/12] MLD STA: set MLO connection info to wpa_sm
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v2] MLD STA: Add support for parsing MLO KDEs
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Re: [PATCH v2 00/17] MLD STA: Add support for open MLO connection when driver's SME in use
- From: Wen Gong <quic_wgong@xxxxxxxxxxx>
- [PATCH] HS20: support credentials with multiple home OIs
- From: Damien Dejean <damiendejean@xxxxxxxxxxxx>
- [PATCH] acs: don't select indoor channel on outdoor operation
- From: David Bauer <mail@xxxxxxxxxxxxxxx>
- RE: [EXT] [PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH v2] MLD STA: Add support for parsing MLO KDEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 17/17] Add support for parsing MLO connection info from roam+auth event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 16/17] MLD STA: Add support to indicate per link channel switch
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 15/17] MLD STA: Add support for indicating per-link MLO signal poll
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 14/17] MLD STA: Add support for MLO_STATUS control interface command
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 13/17] driver_nl80211: send bssid info as parameter to nl80211_get_link_signal
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 12/17] MLD STA: Indicate AP MLD address in STATUS command
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 11/17] MLD STA: Indicate AP MLD address in CTRL-EVENT-CONNECTED
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 10/17] bss: Indicate AP MLD address in bss info
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 08/17] Add API to get MLD address from basic ML IE
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 09/17] bss: Parse and store MLD address of the AP from ML IE
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 07/17] scan: Add API to get ML IE of specified type from scan result IEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 05/17] MLD STA: Add support to fetch MLO connection info to wpa_s
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 06/17] MLD STA: Use AP MLD address to set supplicant port as authorized
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 01/17] EHT: Add Multi-Link element field definitions
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 03/17] MLD STA: Add support to parse MLO connection info in NL80211_CMD_CONNECT event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 00/17] MLD STA: Add support for open MLO connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 04/17] MLD STA: Indicate MLO connection info in driver status
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 02/17] Add API to get ML IE of specified type from IEs buffer
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH v2 6/6] tests: hwsim: ap_dynamic: Added test case for VAP restart
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 5/6] nl80211: Make processing rtm link event per bss
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 4/6] nl80211: Remove obsolete ifindex
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 3/6] nl80211: Restored usage of the resolved ifname
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 2/6] Revert "nl80211: Indicate interface-down event only for the main netdev"
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 0/6] nl80211: Process RTM event per bss
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH v2 1/6] Revert "nl80211: Indicate interface up only for the main netdev"
- From: Alexander Savchenko <oleksandr.savchenko@xxxxxxxxxx>
- [PATCH 1/1] Use a less generic name for IEEE802.11 CRC-32 routine
- From: Sergey Matyukevich <geomatsi@xxxxxxxxx>
- Re: Using RADIUS CoA for reauthenticate STA
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- Re: Using RADIUS CoA for reauthenticate STA
- From: Daniil Sliusar <sliusardaniil@xxxxxxxxx>
- Re: Using RADIUS CoA for reauthenticate STA
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Using RADIUS CoA for reauthenticate STA
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 17/18] MLD STA: Get MLO links channel width information for MLO_SIGNAL_POLL
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 16/18] MLD STA: Add support for indicating per-link MLO signal poll
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 12/18] MLD STA: Indicate AP MLD address in CTRL-EVENT-CONNECTED
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 10/18] bss: Parse and store MLD address of the AP from ML IE
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 09/18] Add API to get MLD address from ML IE
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 07/18] MLD STA: Enable MLO connection for open mode when driver's SME in use
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 04/18] MLD STA: Add support to fetch MLO connection info to wpa_s
- From: Jouni Malinen <j@xxxxx>
- Using RADIUS CoA for reauthenticate STA
- From: Daniil Sliusar <sliusardaniil@xxxxxxxxx>
- Re: [PATCH] Fix wrong AKM priority for FILS
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] P2P: Skip 6GHz band directly if 6GHz P2P is disabled
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/1] EAPOL: Update PMK length in EAPOL callback to support newer key management
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] OpenSSL: Include rsa.h for all OpenSSL versions
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 02/18] MLD STA: Add support to parse MLO connection info in NL80211_CMD_CONNECT event
- From: Jouni Malinen <j@xxxxx>
- [PATCH] ACS: include frequency in info messages
- From: stijn@xxxxxxxxxxxxx
- Re: [PATCH 1/1] STA_ASSOC: Mark Port authorization and State Completion based on authorized state in connect event
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- [PATCH] Fix wrong AKM priority for FILS
- From: Seongsu Choi <seongsu.choi@xxxxxxxxxxx>
- [PATCH] P2P: Skip 6GHz band directly if 6GHz P2P is disabled
- From: Hector Jiang <jianghaitao@xxxxxxxx>
- [PATCH] nl80211: Remove probe_req registration before changing interface type
- From: Hector Jiang <jianghaitao@xxxxxxxx>
- Modified SSID
- From: Gwendolyn Scharkowski <bav7408@xxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/12] MLD STA: Add support for parsing MLO KDEs
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 11/12] MLD STA: Add support for SAE external auth support
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 09/12] MLD STA: Add support for validating MLO KDEs for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 06/12] MLD STA: Configure pairwise keys using MLD address
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 01/12] MLD STA: Add support for parsing MLO KDEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 00/12] MLD STA: Add support for four-way handshake and SAE external authentication
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 12/12] MLD STA: Indicate MLO support for security modes to driver's SME
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 08/12] MLD STA: Add support for processing EAPOL 3/4 frame
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 10/12] MLD STA: Use AP MLD address as destination for 4WHS EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 03/12] MLD STA: Add support to fetch per-link beacon WPA/RSN/RSNX IEs into wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 04/12] MLD STA: Add MLO KDEs for 2/4 and 4/4 EAPOL frames
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 07/12] MLD STA: Add support to configure keys with MLO link ID param
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 05/12] MLD STA: Derive pairwise keys using MLD address
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 02/12] MLD STA: set MLO connection info to wpa_sm
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH] eapol: ignore response in workarond mode
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- [PATCH] Remove probe request registration before changing interface
- From: 姜海涛(Hector Jiang) <jianghaitao@xxxxxxxx>
- [PATCH] P2P: Skip 6GHz band directly if 6GHz P2P is disabled
- From: 姜海涛(Hector Jiang) <jianghaitao@xxxxxxxx>
- [PATCH] tests: hwsim: search for UBSAN in kernel messages
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- PATCH: inform upper over layers which peer has accepted config
- From: Eliot Lear <lear@xxxxxxx>
- RE: [EXT] [PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH 6/7] hostapd: Add RELOAD_BSS
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 7/7] tests: hwsim: Add test_ap_reload_bss_only
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 4/7] tests: hwsim: write_hostapd_config: Add iface_params and bss_params
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 5/7] tests: hwsim: Add test_ap_config_reload_on_sighup_config_id
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 2/7] hostapd: Add config_id parameter
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 1/7] hostapd: Split hostapd_clear_old with hostapd_clear_old_bss
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 0/6] hostapd: add support for reconfiguring single BSSes
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- [PATCH 3/7] hostapd: Add config_id to get_config() output
- From: Raphaël Mélotte <raphael.melotte@xxxxxxx>
- Re: Roaming ft-over-ds based on RSSI
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- RE: Roaming ft-over-ds based on RSSI
- From: Dennis Bland <dennis@xxxxxxxxxxxxxxxxx>
- [PATCH] hostap: Missing flags in RNR IE
- From: shay.bar@xxxxxxxxxx
- [PATCH] wpa:change state to AUTHENTICATING after trigger external_auth ok
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- Connect without scanning using PBSS
- From: Chris Bainbridge <chris.bainbridge@xxxxxxxxxxxxxxx>
- [PATCH 18/18] MLD STA: Add support to indicate per link channel switch
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 17/18] MLD STA: Get MLO links channel width information for MLO_SIGNAL_POLL
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 16/18] MLD STA: Add support for indicating per-link MLO signal poll
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 15/18] MLD STA: Add support for MLO_STATUS control interface command
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 14/18] driver_nl80211: send bssid info as parameter to nl80211_get_link_signal
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 13/18] MLD STA: Indicate AP MLD address in STATUS command
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 12/18] MLD STA: Indicate AP MLD address in CTRL-EVENT-CONNECTED
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 11/18] bss: Indicate AP MLD address in bss info
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 10/18] bss: Parse and store MLD address of the AP from ML IE
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 09/18] Add API to get MLD address from ML IE
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 08/18] scan: Add API to get extended IEs from scan result IEs
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 07/18] MLD STA: Enable MLO connection for open mode when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 06/18] MLD STA: Use AP MLD address to set supplicant port as authorized
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 04/18] MLD STA: Add support to fetch MLO connection info to wpa_s
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 05/18] MLD STA: Add support to hold bss references associated with MLO links
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 01/18] Sync with wireless-next.git include/uapi/linux/nl80211.h
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 03/18] MLD STA: Indicate MLO connection info in driver status
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 02/18] MLD STA: Add support to parse MLO connection info in NL80211_CMD_CONNECT event
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 00/18] MLD STA: Add support for open MLO connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH] dbus:Add dbus notify when key_mgmt changes
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- [PATCH] D-Bus: hs20 credentials with multiple domains
- From: Damien Dejean <damiendejean@xxxxxxxxxxxx>
- DPP relay APs over TCP example configuration/commands
- From: ABDO Alexandre <alexandre.abdo@xxxxxxxxxxxx>
- RFC 9266: Channel Bindings for TLS 1.3 support
- From: * Neustradamus * <neustradamus@xxxxxxxxxxx>
- Re: [PATCHv2] EAP-TEAP: like EAP-FAST, reverse the order of the MS-MPPE keys
- From: "Alexander Clouter" <alex+hostapd@xxxxxxxxxxx>
- HS20 multiple {,required}_roaming_consortium
- From: Damien Dejean <damiendejean@xxxxxxxxxxxx>
- [PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH] Issue: Non-HE capable interface advertising HE
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH] wolfSSL: Add support for DPP and EAP-TEAP/EAP-FAST
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- DPP: Allow 3rd party information to be added into config object (68209ddbe4d6f26d9db112fc8ac6a70d8bf816e0)
- From: Eliot Lear <lear@xxxxxxx>
- [PATCH] nl80211: Fix bridge option for non first-bss
- From: Mateusz Bajorski <mbajorski@xxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: James Ralston <ralston@xxxxxxxxx>
- [PATCH] Update PMK parameters in WPA state machine before association
- From: Beniamino Galvani <bgalvani@xxxxxxxxxx>
- [PATCH]: Disable 11ax/HE functionality for an Interface based on DRV capability
- From: Deepti Panchal <deepti.panchal@xxxxxxx>
- [PATCH v1 6/6] tests: hwsim: ap_dynamic: Added test case for VAP restart
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 2/6] Revert "nl80211: Indicate interface-down event only for the main netdev"
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 3/6] nl80211: Restored usage of the resolved ifname
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 5/6] nl80211: Make processing rtm link event per bss
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 4/6] nl80211: Remove obsolete ifindex
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 1/6] Revert "nl80211: Indicate interface up only for the main netdev"
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH v1 0/6] nl80211: Process RTM event per bss
- From: oleksandr.savchenko@xxxxxxxxxx
- [PATCH] tests: vm: simplify parameter passing
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 2/2] MLO: Add support for open connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 1/2] Sync with wireless-next.git include/uapi/linux/nl80211.h
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [PATCH 0/2] Add support for open MLO connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [RFC 1/2] Sync with wireless-next.git include/uapi/linux/nl80211.h
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [RFC 0/2] Add support for MLO connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- [RFC 2/2] MLO: Add support for open connection when driver's SME in use
- From: Veerendranath Jakkam <quic_vjakkam@xxxxxxxxxxx>
- Re: EAP-TLS RADIUS login for local user authentication
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- Re: WPA3 SAE and FIPS 140-3
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- Roaming ft-over-ds based on RSSI
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Masterthesis Research
- From: Gwendolyn Scharkowski <bav7408@xxxxxxxxxxxxxxxxxxxxxx>
- nl80211: kernel reports: key addition failed
- From: <roland@xxxxxxxxxxxx>
- Re: WPA3 SAE and FIPS 140-3
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: WPA3 SAE and FIPS 140-3
- From: James Ralston <ralston@xxxxxxxxx>
- [PATCH] dbus: Fix property DebugShowKeys and DebugTimestamp
- From: Clemens Famulla-Conrad <cfamullaconrad@xxxxxxx>
- [PATCHv2] EAP-TEAP: like EAP-FAST, reverse the order of the MS-MPPE keys
- From: "Alexander Clouter" <alex+hostapd@xxxxxxxxxxx>
- [PATCH] EAP-TEAP: like EAP-FAST, reverse the order of the MS-MPPE keys
- From: Alexander Clouter <alex+hostapd@xxxxxxxxxxx>
- WG: NO-OUTDOOR channels
- From: "Reimann Ronny (lesswire GmbH)" <reimann@xxxxxxxxxxxx>
- [PATCH] wpa_supplicant: Resolve secondary VAP association issue
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: WPA3 SAE and FIPS 140-3
- From: achtol <achtol@xxxxxxx>
- Re: WPA3 SAE and FIPS 140-3
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- WPA3 SAE and FIPS 140-3
- From: achtol <achtol@xxxxxxx>
- Re: [PATCH] Avoid PMF negotiation for networks if the driver does not support PMF
- From: Jeffery Miller <jefferymiller@xxxxxxxxxx>
- Re: Unable to Connect to Open Network
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: Unable to Connect to Open Network
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: Unable to Connect to Open Network
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: Unable to Connect to Open Network
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- [PATCH] OpenSSL: Include rsa.h for all OpenSSL versions
- From: Andre Heider <a.heider@xxxxxxxxx>
- [PATCH] mka: Update GCM-AES-128 cipher suite identifier
- From: Mahesh Patil <maheshp@xxxxxxxxxx>
- FT with SuiteB 192 bit
- From: kiran k <ikirank@xxxxxxxxx>
- [PATCH] support CONFIG_DRIVER_NL80211_SYNA for synaptics wifi
- From: Andy Kuo <andy.kuo@xxxxxxxxxxxxx>
- [PATCH] dbus: Omit FT key mgmt capabilities without CONFIG_IEEE80211R
- From: Clemens Famulla-Conrad <cfamullaconrad@xxxxxxx>
- Unable to Connect to Open Network (Part 2) (fwd)
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: [PATCH] fils: set sm->pairwise_set after setting TK to driver
- From: James Prestwood <prestwoj@xxxxxxxxx>
- [PATCH] fils: set sm->pairwise_set after setting TK to driver
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Unable to Connect to Open Network (Part 2)
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- Re: PATCH: Don't close DPP TCP connection for duplicate Presence Announcements
- From: Eliot Lear <lear@xxxxxxx>
- Re: PATCH: Don't close DPP TCP connection for duplicate Presence Announcements
- From: Jan Ceuleers <jan.ceuleers@xxxxxxxxx>
- PATCH: Don't close DPP TCP connection for duplicate Presence Announcements
- From: Eliot Lear <lear@xxxxxxx>
- Re: 4way-Handshake error occurred in Reauth operation in connected state.
- From: mun-chang jung <biting74@xxxxxxxxx>
- 4way-Handshake error occurred in Reauth operation in connected state.
- From: mun-chang jung <biting74@xxxxxxxxx>
- [PATCH 1/1] EAPOL: Update PMK length in EAPOL callback to support newer key management
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- [PATCH 1/1] STA_ASSOC: Mark Port authorization and State Completion based on authorized state in connect event
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- Re: Subject: [PATCH 1/1] STA_ASSOC: Mark Port authorization and State Completion based on authorized state in connect event
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- Re: WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support
- From: Pali Rohár <pali@xxxxxxxxxx>
- Re: Subject: [PATCH 1/1] STA_ASSOC: Mark Port authorization and State Completion based on authorized state in connect event
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- Subject: [PATCH 1/1] STA_ASSOC: Mark Port authorization and State Completion based on authorized state in connect event
- From: Vinayak Yadawad <vinayak.yadawad@xxxxxxxxxxxx>
- Unable to Connect to Open Network
- From: Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
- [PATCH] wpa_supplicant: Convert SSID into printable form before printing
- From: Kaidong Wang <kaidong@xxxxxxxxxxxx>
- Re: [PATCH] nl80211: Previous MAC isn't a foreign address
- From: Andrzej Ostruszka <amo@xxxxxxxxxxxx>
- [PATCH v3] tests: hwsim: vm-run: add mode for running under gdb
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] nl80211: Previous MAC isn't a foreign address
- From: Michał Kazior <kazikcz@xxxxxxxxx>
- [PATCH] nl80211: Previous MAC isn't a foreign address
- From: Andrzej Ostruszka <amo@xxxxxxxxxxxx>
- [PATCH v2] tests: hwsim: vm-run: add mode for running under gdb
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] tests: hwsim: vm-run: add mode for running under gdb
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] tests: hwsim: allow configuring MODULEDIR
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: EAP-TLS RADIUS login for local user authentication
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: EAP-TLS RADIUS login for local user authentication
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- Re: EAP-TLS RADIUS login for local user authentication
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- EAP-TLS RADIUS login for local user authentication
- From: Bob Friesenhahn <bfriesen@xxxxxxxxxxxxxxxxxxx>
- wpa_supplicant broken with libertas driver since 2.7 (hacky fixes included)
- From: Doug Brown <doug@xxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Andrew Zaborowski <balrogg@xxxxxxxxxxxxxx>
- Re: using WPA3 SAE
- From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
- Re: using WPA3 SAE
- From: Jouni Malinen <j@xxxxx>
- using WPA3 SAE
- From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
- Implementation of Initial EAP Request/Identity with driver = wired, question.
- From: Mariusz Plata <mariuszplata@xxxxxxxxx>
- Re: [EXTERNAL] Re: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Sean Li <sean@xxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Re: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Jouni Malinen <j@xxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Jouni Malinen <j@xxxxx>
- Cannot lookup EAP user on reauthentication (PEAP/TTLS)
- From: James Prestwood <prestwoj@xxxxxxxxx>
- [PATCH] hostap: RNR Bssid is empty
- From: Shay Bar <shay.bar@xxxxxxxxxx>
- Re: [EXTERNAL] Re: Fwd: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Sean Li <sean@xxxxxxxxx>
- Re: wpa built with openssl3 can't connect to servers using TLS 1.1 or older
- From: Jouni Malinen <j@xxxxx>
- Re: Fwd: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Move wpa_cli_history default to $XDG_DATA_HOME and fallback to $HOME
- From: Jouni Malinen <j@xxxxx>
- Re: wpa built with openssl3 can't connect to servers using TLS 1.1 or older
- From: Stefan Paetow <Stefan.Paetow@xxxxxxxxxx>
- Fwd: Pixel6 was not able to connect due to phone indicates support for SAE H2E, but did not use it
- From: Sean Li <sean@xxxxxxxxx>
- [PATCH] Move wpa_cli_history default to $XDG_DATA_HOME and fallback to $HOME
- From: gyara <me@xxxxxxxxx>
- [PATCH] tests: run gc.collect() to work around reentrant logging
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- hidden scan results
- From: avichal agarwal <avichalagarwal@xxxxxxxxxxx>
- wpa built with openssl3 can't connect to servers using TLS 1.1 or older
- From: Sebastien Bacher <seb128@xxxxxxxxxx>
- [PATCH] Add usage print for -q flag
- From: Orr Mazor <orrmazor@xxxxxxxxx>
- [PATCH v3 06/11] mbssid: configure parameters and element data
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 03/11] mbssid: configure all BSSes before beacon setup
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 11/11] mbssid: add nl80211 support
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 08/11] mbssid: add MBSSID configuration element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 09/11] mbssid: process known BSSID element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 10/11] mbssid: make the AID space shared
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 07/11] mbssid: set extended capabilities
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 02/11] mbssid: retrieve driver capabilities
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 04/11] mbssid: add multiple BSSID elements
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 00/11] hostapd: MBSSID and EMA support
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 05/11] mbssid: add non-inheritance element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v3 01/11] mbssid: add new configuration option
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 04/11] mbssid: add multiple BSSID elements
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 05/11] mbssid: add non-inheritance element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 10/11] mbssid: make the AID space shared
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 11/11] mbssid: add nl80211 support
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 01/11] mbssid: add new configuration option
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 08/11] mbssid: add MBSSID configuration element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH] mbssid: set extended capabilities
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH] mbssid: process known BSSID element
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 02/11] mbssid: retrieve driver capabilities
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 06/11] mbssid: configure parameters and element data
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 03/11] mbssid: configure all BSSes before beacon setup
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH v2 00/11] hostapd: MBSSID and EMA support
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH] tests: reload correct regdb if possible/needed
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] P2P: Include only 6GHz PSC channels in full scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- RE: [PATCH] [BUGFIX] EHT: Relax the EHT MCS/NSS length checking
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH] [BUGFIX] EHT: Relax the EHT MCS/NSS length checking
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- RE: [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Re: [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Jouni Malinen <j@xxxxx>
- RE: [PATCH v5 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Re: [PATCH] hostapd: add the destination address of unsolicited probe response
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v5 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Add -q flag to hostapd in order to control log level
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] ACS: always discard DFS channels when DFS isn't allowed
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- RE: [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v5 2/4] scan: Add options to disable 6GHz collocated scanning
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Re: [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v5 2/4] scan: Add options to disable 6GHz collocated scanning
- From: Jouni Malinen <j@xxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Jouni Malinen <j@xxxxx>
- wpa_supplicant WPA-EAP hashed password over dbus
- From: Matt Harvey <mharvey@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] tests: Active beacon req for primary/center channel
- From: Baligh GASMI <gasmibal@xxxxxxxxx>
- Re: [PATCH] Implement new functions for EAP:
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] hostapd: add the destination address of unsolicited probe response
- From: MeiChia Chiu <MeiChia.Chiu@xxxxxxxxxxxx>
- Re: [PATCH 09/13] mbssid: set extended capabilities
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Jouni Malinen <j@xxxxx>
- BUG: kernel panic when loading hostap_cs driver
- From: 尤晓杰 <yxj790222@xxxxxxx>
- [PATCH] Add -q flag to hostapd in order to control log level
- From: Orr Mazor <orrmazor@xxxxxxxxx>
- BUG: kernel panic when loading hostap_cs driver
- From: 尤晓杰 <yxj790222@xxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: James Ralston <ralston@xxxxxxxxx>
- Re: [PATCH] Add support for mbedtls crypto library for STA mode
- From: krishna t <krish271828@xxxxxxxxx>
- Re: [PATCH] wpa_supplicant/README-WPS: beautifications
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wolfSSL: support both DER and PEM blobs
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wolfSSL: Fixes for FIPS builds
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] add SSLKEYLOGFILE capability to allow Wireshark TLS decoding of payloads
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] SAE-PK support with wolfSSL
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Add support for mbedtls crypto library for STA mode
- From: Jouni Malinen <j@xxxxx>
- [PATCH] wpa_supplicant/README-WPS: beautifications
- From: yegorslists@xxxxxxxxxxxxxx
- [PATCH] MKA: Do not delay transmitting MKPDU at startup
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: "d. caratti" <davide.caratti@xxxxxxxxx>
- Re: [PATCH] wolfSSL: Fixes for FIPS builds
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] wolfSSL: support both DER and PEM blobs
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] wolfSSL: Fixes for FIPS builds
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] wolfSSL: support both DER and PEM blobs
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] Check the return of pbkdf2_sha1 for errors
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] add SSLKEYLOGFILE capability to allow Wireshark TLS decoding of payloads
- From: "Alexander Clouter" <alex+hostapd@xxxxxxxxxxx>
- [PATCH] Add missing free calls for wolfSSL structs
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH v2 3/4] ACS: introduce acs_adjust_secondary
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- [PATCH v2 4/4] ACS: allow selecting a better channel when using 40/80/160MHz
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- [PATCH v2 2/4] ACS: introduce acs_get_bw_center_chan
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- [PATCH v2 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- [PATCH v2 0/4] ACS: better channel selection for 40/80/160 MHz
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- Re: [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- [PATCH] MKA: Process DIST-SAK after SAK-USE.
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH v2] MKA: Reliable election of the key_server
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH v2] MKA: Do not set new_sak false until the SAK has be generated
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH v2] MKA: delay allReceiving until potential peer list is empty
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH v2] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- Re: [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- Re: [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL
- From: Jouni Malinen <j@xxxxx>
- [PATCH] MKA: Peer message number updated twice
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH] MKA: Do not set new_sak false until the SAK has be generated
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH 2/2] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] SAE-PK support with wolfSSL
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- [PATCH] MKA: delay allReceiving until potential peer list is empty
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH] MKA: Reliable election of the key_server
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- [PATCH] Add support for mbedtls crypto library for STA mode
- From: krish271828@xxxxxxxxx
- [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- Re: [RFC PATCH 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan
- From: Jouni Malinen <j@xxxxx>
- Re: [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/1] MBO: Check association disallowed attribute in beacons and probe responses
- From: Jouni Malinen <j@xxxxx>
- RE: [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH v5 3/4] tests: Add coverage for testing disabling collocated 6GHz scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v5 2/4] scan: Add options to disable 6GHz collocated scanning
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v5 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- Re: FT in combination with WPA/EAP supported ?
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow enabling background radar
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Install wpa_passphrase when not disabled
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] scan: Added printing of ssid in dump scan res
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wolfSSL: Fix the memory leak of crypto_ec_point_compute_y_sqr()
- From: Jouni Malinen <j@xxxxx>
- Re: Key Server support for Group CAs
- From: Jouni Malinen <j@xxxxx>
- [PATCH] hostapd: allow enabling background radar
- From: greearb@xxxxxxxxxxxxxxx
- Re: [PATCH 10/13] mbssid: DTIM period configuration for EMA AP
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 11/13] mbssid: hidden SSID support
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 05/13] mbssid: add multiple BSSID elements
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- Re: [PATCH 10/13] mbssid: DTIM period configuration for EMA AP
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- Re: [PATCH 11/13] mbssid: hidden SSID support
- From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
- [PATCH] Install wpa_passphrase when not disabled
- From: Alex Kiernan <alex.kiernan@xxxxxxxxx>
- [no subject]
- Re: [PATCH] EAPOL_SUPP: ignore Response at CONNECTING state
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- Key Server support for Group CAs
- From: Greg Goblirsch <gregg@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- [PATCH] scan: Added printing of ssid in dump scan res
- From: xinpeng wang <wangxinpeng@xxxxxxxxxxxxx>
- Re: [PATCH] Implement new functions for EAP:
- From: Juliusz Sosinowicz <juliusz@xxxxxxxxxxx>
- RE: [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- RE: [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH] wolfSSL: Fix the memory leak of crypto_ec_point_compute_y_sqr()
- From: MurphyZhao <d2014zjt@xxxxxxx>
- Re: [PATCH] ACS: always discard DFS channels when DFS isn't allowed
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- Re: [PATCH] ctrliface: add the debug log, print out the source address of the Ctrl iface when recv command
- From: Jouni Malinen <j@xxxxx>
- FT in combination with WPA/EAP supported ?
- From: <roland@xxxxxxxxxxxx>
- Re: [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Dennis Bland <dennis@xxxxxxxxxxxxxxxxx>
- General Support
- From: scotty42@xxxxxxxxxxx
- Re: [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] EAPOL_SUPP: ignore Response at CONNECTING state
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Implement new functions for EAP:
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] sae: enable HMAC_SHA384_KDF and HMAC_SHA512_KDF unconditionally
- From: Jouni Malinen <j@xxxxx>
- Re: Update eapol_test output for list of supported EAP types
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] ACS: honor acs_exclude_dfs with hostapd's ACS implementation
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] ACS: always discard DFS channels when DFS isn't allowed
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Ryder Lee <ryder.lee@xxxxxxxxxx>
- Re: [PATCH v3 0/5] Introduce 802.11ax bss coloring support
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wpa_supplicant: add the missing CONFIG_HE_OVERRIDES option to the defconfig
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] tests: vm: pretend the RNG is initialized
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- Re: [PATCH] hostapd: allow disabling background radar
- From: Jouni Malinen <j@xxxxx>
- hostapd config parsing issues
- From: Richard Schleich <rs@xxxxxxxxxxx>
- [PATCH] wpa_supplicant: add the missing CONFIG_HE_OVERRIDES option to the defconfig
- From: yegorslists@xxxxxxxxxxxxxx
- Re: [PATCH] hostapd: allow disabling background radar
- From: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx>
- [PATCH] hostapd: allow disabling background radar
- From: greearb@xxxxxxxxxxxxxxx
- Re: [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- RE: [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH v4 3/4] tests: Extend 'wpas_config_file' test to cover 'non_coloc_6ghz'
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH] tests: vm: pretend the RNG is initialized
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- RE: [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- [PATCH v3 4/4] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v3 3/4] tests: Extend 'wpas_config_file' test to cover 'non_coloc_6ghz'
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v3 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- Update eapol_test output for list of supported EAP types
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] RRM: include passive channels in active beacon report scan
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] wpa_supplicant: Use unique IDs for networks and credentials
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v2 2/2] ANQP/hostapd: Add more data to the ANQP RNR response.
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH v2 1/2] ANQP/hostapd RNR response to RNR query to ANQP query through action frame.
- From: Jouni Malinen <j@xxxxx>
- Re: OpenSSL 3 compatibility patch
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] ANQP/hostapd: RNR response to RNR query to ANQP query through action frame.
- From: Jouni Malinen <j@xxxxx>
- OpenSSL 3 compatibility patch
- From: Alan DeKok <aland@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] tests: Active beacon req for primary/center channel
- From: Baligh GASMI <gasmibal@xxxxxxxxx>
- Re: [PATCH 13/13] mbssid: add nl80211 support
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 11/13] mbssid: hidden SSID support
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 10/13] mbssid: DTIM period configuration for EMA AP
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 09/13] mbssid: set extended capabilities
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 05/13] mbssid: add multiple BSSID elements
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 04/13] mbssid: get and set configuration parameters
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 03/13] mbssid: configure all BSSes before beacon setup
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 01/13] mbssid: add configuration options
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 02/13] mbssid: retrieve driver capabilities
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/2] tests: Active beacon req for primary/center channel
- From: Jouni Malinen <j@xxxxx>
- Re: WPA 3 on (k)FreeBSD?
- From: "Andrej Shadura" <andrewsh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- [PATCH] AP: SAE on 6GHz requires H2E enabled in config
- From: Nicolas Escande <nico.escande@xxxxxxxxx>
- Re: [PATCH] Fix MIN() macro
- From: Baligh GASMI <gasmibal@xxxxxxxxx>
- RE: [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
- Re: [PATCH v2] wpa_supplicant: Do not associate on 6GHz with forbidden configurations
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] SAE-PK: add the option to the defconfigs
- From: Jouni Malinen <j@xxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] Fix MIN() macro
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] AP: guard FT-SAE code with CONFIG_IEEE80211R_AP
- From: Jouni Malinen <j@xxxxx>
- Re: WPA 3 on (k)FreeBSD?
- From: Jouni Malinen <j@xxxxx>
- WPA 3 on (k)FreeBSD?
- From: "Andrej Shadura" <andrewsh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
- [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- [PATCH v2 2/2] P2P: Do not use collocated scan logic when scanning 6GHz
- From: Ilan Peer <ilan.peer@xxxxxxxxx>
- Re: WPA3-Personal: wpa_supplicant in AP mode issue
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Sebastien Bacher <seb128@xxxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- [PATCH] Mesh mode: Add check to the disable open mode key in 6GHz.
- From: sharadanandk@xxxxxxxxx
- SAE on 6GHz should not allow sae_pwe=0
- From: "Nicolas Escande" <nico.escande@xxxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Sebastien Bacher <seb128@xxxxxxxxxx>
- hostapd wireguard
- From: Barry Cisna <brcisna@xxxxxxxxx>
- RE: Fail to access RSN property with DBus if pairwise cipher suite count is 0
- From: "Deroire, Guillaume" <Guillaume.Deroire@xxxxxxxx>
- Re: Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- [PATCH] AP: guard FT-SAE code with CONFIG_IEEE80211R_AP
- From: Beniamino Galvani <bgalvani@xxxxxxxxxx>
- [PATCH] SAE-PK: add the option to the defconfigs
- From: yegorslists@xxxxxxxxxxxxxx
- Re: [PATCH v2] Fix SIGSEGV of eapol_test
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] hostapd: add the missing CONFIG_SAE option to the defconfig
- From: Jouni Malinen <j@xxxxx>
- Re: SIGSEGV in dpp_tcp_conn_status_requested
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- [PATCH v2] Fix SIGSEGV of eapol_test
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- [PATCH] Fix SIGSEGV of eapol_test
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- Re: Retansmitted associate requests with OWE
- From: James Prestwood <prestwoj@xxxxxxxxx>
- Re: Retansmitted associate requests with OWE
- From: Jouni Malinen <j@xxxxx>
- Re: Fail to access RSN property with DBus if pairwise cipher suite count is 0
- From: Jouni Malinen <j@xxxxx>
- Re: problem with wpa_supplicant 2.10
- From: Jouni Malinen <j@xxxxx>
- Re: problem with wpa_supplicant 2.10
- From: Mathias <mathiaswe@xxxxxx>
- Re: WPA3-Personal: wpa_supplicant in AP mode issue
- From: Masashi Honma <masashi.honma@xxxxxxxxx>
- RE: Fail to access RSN property with DBus if pairwise cipher suite count is 0
- From: "Deroire, Guillaume" <Guillaume.Deroire@xxxxxxxx>
[Index of Archives]
[Linux Networking Development]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]