On Sun, Jul 31, 2022 at 10:40:12AM +0300, shay.bar@xxxxxxxxxx wrote: > diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c > @@ -7464,6 +7464,12 @@ static u8 * hostapd_eid_rnr_iface(struct hostapd_data *hapd, > reporting_hapd->conf->ssid.short_ssid) > bss_param |= RNR_BSS_PARAM_SAME_SSID; > > + if (iface->num_bss > 1) > + bss_param |= RNR_BSS_PARAM_MULTIPLE_BSSID; RNR_BSS_PARAM_MULTIPLE_BSSID indicates that "the reported AP is part of a multiple BSSID set", i.e., this is talking about the Multiple BSSID mechanism defined in IEEE 802.11 to allow a set of APs to share a single transmitting BSS. hostapd does not support that, i.e., num_bss > 1 indicates that there are multiple independently transmitting BSSs. > + if (i == start) > + bss_param |= RNR_BSS_PARAM_TRANSMITTED_BSSID; Similarly for this bit. hostapd configures all BSSs to be transmitting their own Beacon frames and as such, I don't think this would be accurate. There is a proposed patchset to add support for Multiple BSSID functionality in the manner that these bits are talking about, but that has not yet been applied. I'd like to be able to test this first with mac80211_hwsim before adding the complexity in without being able to easily test it. In other words, this patch could be consider later once the referenced functionality is included. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
