U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 11/14] gpio: move gpio_is_valid to include/gpio.h, (continued)
- [PATCH 11/14] gpio: move gpio_is_valid to include/gpio.h, Sascha Hauer
- [PATCH 05/14] ARM: AT91: Always provide clk_set_rate stub, Sascha Hauer
- [PATCH 10/14] spi: mxs-spi: Allow compilation on i.MX28 only, Sascha Hauer
- [PATCH 13/14] ARM: AM335x: Select OFTREE, Sascha Hauer
- [PATCH 02/14] ARM: ep93xx: Fix typo, Sascha Hauer
- [PATCH 12/14] ARM: rockchip: select PINCTRL, Sascha Hauer
- [PATCH 08/14] fs: bpkfs: select CRC32, Sascha Hauer
- [PATCH 03/14] ARM: ep93xx: let broken SoCs depend on BROKEN, Sascha Hauer
- [PATCH 04/14] ARM: Let MMU depend on !CPU_ARM946E, Sascha Hauer
- [PATCH 09/14] firmware: altera serial: depend on GENERIC_GPIO, Sascha Hauer
- [PATCH 07/14] param: make string arguments to dev_add_param_fixed const, Sascha Hauer
- [RFC] clocksource: dummy: don't show message on first cs read,
Antony Pavlov
- [PATCH 01/11] ARM: dts: only build internal dtb when the name is not empty,
Sascha Hauer
- [PATCH 02/11] ARM: Nomadik: Implement a clk_set_rate stub, Sascha Hauer
- [PATCH 06/11] video: EDID: depends on I2C, Sascha Hauer
- [PATCH 04/11] net: fec_imx: remove unused includes, Sascha Hauer
- [PATCH 03/11] fs: uImagefs: select crc32, Sascha Hauer
- [PATCH 05/11] command: load[sbxy]: Depend on CONSOLE_FULL, Sascha Hauer
- [PATCH 11/11] gpio: clps711x: Add missing include, Sascha Hauer
- [PATCH 07/11] ARM: Don't allow Thumb2 on Tegra, Sascha Hauer
- [PATCH 09/11] USB: Gadget: fastboot: depends on command support, Sascha Hauer
- [PATCH 08/11] USB: Gadget: Select poller from USB_GADGET option, Sascha Hauer
- [PATCH 10/11] ARM: PBL: Add missing pieces for xz compressed PBL image, Sascha Hauer
- [PATCH 1/4] usb: musb: only build musb_barebox if host is enabled,
Lucas Stach
- [PATCH 1/3] command: login: depend on !CONSOLE_NONE,
Sascha Hauer
- Add i.MX6 SoloX support,
Sascha Hauer
- [PATCH 05/11] imx-usb-loader: Add i.MX6sx support, Sascha Hauer
- [PATCH 01/11] mci: imx-esdhc: Fix Interrupt enable register for i.MX6sx, Sascha Hauer
- [PATCH 07/11] ARM: i.MX: ocotp: Fix MAC address provider for unaligned addresses, Sascha Hauer
- [PATCH 11/11] ARM: i.MX: update imx_v7_defconfig, Sascha Hauer
- [PATCH 02/11] mci: imx-esdhc: Add i.MX6sl compatible, Sascha Hauer
- [PATCH 08/11] ARM: i.MX: ocotp: Add i.MX6sx compatible entry, Sascha Hauer
- [PATCH 04/11] net: fec_imx: Add i.MX6sx compatible entry, Sascha Hauer
- [PATCH 06/11] pinctrl: Add i.MX6sx compatible entry, Sascha Hauer
- [PATCH 09/11] ARM: i.MX: Add i.MX6sx support, Sascha Hauer
- [PATCH 10/11] ARM: i.MX: Add i.MX6sx sabresdb support, Sascha Hauer
- [PATCH 03/11] serial: i.MX: Use "per" clk, Sascha Hauer
- [PATCH] ARM: dts: phyCORE-AM335x: Remove unused pin in nandflash pinmuxing,
Wadim Egorov
- [PATCH v2 1/5] arm: imx: pca100: only try to enable USB if USB_ULPI is configured,
Lucas Stach
- Re: Bag from China with competitive quality and price, TONY SHAO AT GUANGXIN PACKAGING
- [PATCH 00/20] First batch of randconfig fixes,
Lucas Stach
- [PATCH 09/20] arm: imx: nand update handler depends on MTD layer, Lucas Stach
- [PATCH 01/20] firmware: socfpga: depend on ARCH_SOCFPGA, Lucas Stach
- [PATCH 05/20] common: firmware: include libfile, Lucas Stach
- [PATCH 03/20] firmware: altera-serial: don't try to check void return value, Lucas Stach
- [PATCH 02/20] firmware: altera-serial: depend on SPI, Lucas Stach
- [PATCH 18/20] common: menu needs PROCESS_ESCAPE_SEQUENCE, Lucas Stach
- [PATCH 14/20] arm: don't allow to select BUILTIN_DTB when building multiimage, Lucas Stach
- [PATCH 07/20] arm: imx: select I2C for all boards that need it in their board init, Lucas Stach
- [PATCH 06/20] arm: imx: select MFD_MC13XXX for all boards that need it, Lucas Stach
- [PATCH 11/20] arm: phyflex-imx6: move common.h before other includes, Lucas Stach
- [PATCH 10/20] arm: imx: properly stub out NAND bbu handler, Lucas Stach
- [PATCH 19/20] usb: gadget: fastboot: select BANNER, Lucas Stach
- [PATCH 20/20] lib: decompress_xz: fix function header to match prototype, Lucas Stach
- [PATCH 08/20] arm: imx: pca100: select USB ULPI support, Lucas Stach
- [PATCH 13/20] mci: esdhc: add back PIO_TIMEOUT, Lucas Stach
- [PATCH 12/20] video: ipuv3: select OFDEVICE for HDMI and LVDS, Lucas Stach
- [PATCH 04/20] firmware: altera-serial: fix printf message, Lucas Stach
- [PATCH 16/20] net: ethoc: depend on OPENRISC, Lucas Stach
- [PATCH 15/20] arm: fill BUILTIN_DTB_NAME for boards that still use this option, Lucas Stach
- [PATCH 17/20] blspec: depend on, not select flexible bootargs, Lucas Stach
- Re: [PATCH 00/20] First batch of randconfig fixes, Sascha Hauer
- Re: [PATCH 00/20] First batch of randconfig fixes, Sascha Hauer
- picotcp barebox integration,
Antony Pavlov
- Gate off ENFC clock before setting clock rate,
Dmitry Lavnikevich
- Activating network during start,
Holger Freyther
- [PATCH] mtd: ubi: get_bad_peb_limit from mtd master,
Jan Weitzel
- [PATCH] stringlist: string_list_contains can use a const string,
Jan Luebbe
- [PATCH] dt: factor out common code,
Jan Luebbe
- [PATCH] ARM:imx6: Fix typo in name alcor,
Christian Hemp
- [PATCH] mtd: nand-mxs: Gate ENFC_CLK_ROOT clock off before changing nand clock rate,
Dmitry Lavnikevich
- bareboxenv-target,
Balasa, Bogdan
- [PATCH] i.MX6: esdctl: Fix a bug in memory probing code,
Andrey Smirnov
- Barebox with DT and kernel without DT support,
Wjatscheslaw Stoljarski
- [PATCH 1/3] pci: correct BAR size calculation,
Lucas Stach
- [PATCH 1/2] am335x:phyflex: Remove phy fixup from board file,
Christian Hemp
- [PATCH 1/2] xymodem: select CRC16 from lib,
Jan Weitzel
- [PATCH 1/4] ARM: i.MX51: Setup MIPI,
Sascha Hauer
- [PATCH] ARM: i.MX: print silicon revision with pr_info, Sascha Hauer
- [PATCH] ARM: i.MX6 Phytec phyFLEX: Fix imx6_bbu_nand_register_handler prototype,
Andrey Smirnov
- mtdparts phyFlex,
Balasa, Bogdan
- [PATCH] scripts: kwboot: fix detection of timeout,
Uwe Kleine-König
- [PATCH 1/4] ARM: update imx_v7_defconfig,
Christian Hemp
- [PATCH v4 0/5] mvebu: Add network support for Armada 370/XP,
Ezequiel Garcia
- [PATCH] ARM: i.MX6 Phytec phyFLEX: Fix imx6_bbu_nand_register_handler usage,
Andrey Smirnov
- [PATCH] partitions/efi: Fix off-by-one error in 'last_lba',
Andrey Smirnov
- [PATCH] ARM: i.MX: Make NAND related Kconfig options depend on MTD,
Andrey Smirnov
- [PATCH] command: memset: Fix argument order in help text, Sascha Hauer
- [PATCH v3 0/4] mvebu: Add network support for Armada 370/XP,
Ezequiel Garcia
- [PATCH 1/2] mtd: nand_orion: remove unused goto label,
Uwe Kleine-König
- [PATCH 1/2] ARM: i.MX6 GuF Santaro: Fix phy clock,
Sascha Hauer
- [PATCH] blspec: fix incompatible pointer type warning,
Lucas Stach
- [PATCH 1/2] of: use OFTREE_MEM_GENERIC for the sandbox,
Jan Luebbe
- non volatile variables and incremental envrironment,
Sascha Hauer
- [PATCH 05/11] magicvar: Add support for dynamically added magicvars, Sascha Hauer
- [PATCH 02/11] environment: remove unused variable, Sascha Hauer
- [PATCH 04/11] environment: Only save changes to the defaultenv, Sascha Hauer
- [PATCH 08/11] cp: Add recursive copy, Sascha Hauer
- [PATCH 06/11] Add support for non volatile variables, Sascha Hauer
- [PATCH 09/11] Add defaultenv command, Sascha Hauer
- [PATCH 01/11] environment: drop unnecessary casts, Sascha Hauer
- [PATCH 10/11] globalvar: Add support for printing all global variables, Sascha Hauer
- [PATCH 03/11] environment: refactor saveenv, Sascha Hauer
- [PATCH 07/11] libfile: Add copy_recursive, Sascha Hauer
- [PATCH 11/11] defaultenv-2: Make use of nonvolatile variables, Sascha Hauer
- [PATCH] arm: mach-imx: fix Eukrea CPUIMX51 Kconfig string,
Lucas Stach
- [PATCH 1/2] ARM: i.MX6: GuF Santaro: Use emmc boot1 for storing the environment,
Sascha Hauer
- [PATCH 1/2] ARM: implement recommended WAR for errata 709718,
Lucas Stach
- [PATCH] arm: imx53-qsrb: fix initcalls on START-R board,
Lucas Stach
- v2014.11.0, Sascha Hauer
- [PATCH 01/10] efi: add proper reset hook,
Lucas Stach
- [PATCH 10/10] efi: mount efivarfs by default if enabled, Lucas Stach
- [PATCH 06/10] lib: add wchar strdup, Lucas Stach
- [PATCH 02/10] efi: add Barebox GUID, Lucas Stach
- [PATCH 09/10] fs: efivar: implement write support, Lucas Stach
- [PATCH 04/10] fs: efivar: switch to standard list implementation, Lucas Stach
- [PATCH 08/10] fs: efivar: don't store attributes in file, Lucas Stach
- [PATCH 07/10] fs: efivar: preserve more info in inode, Lucas Stach
- [PATCH 03/10] fs: efivar: cosmetic changes, Lucas Stach
- [PATCH 05/10] fs: efivar: move variable discovery into probe, Lucas Stach
- Re: [PATCH 01/10] efi: add proper reset hook, Sascha Hauer
- [PATCH] fix mbr detection,
Zahari Doychev
- [PATCH 01/12] tegra: beaver: set hostname in board init,
Lucas Stach
- [PATCH 06/12] tegra: colibri-t20: add stdout-path, Lucas Stach
- [PATCH 02/12] tegra: jetson-tk1: set hostname in board init, Lucas Stach
- [PATCH 05/12] tegra: beaver: add stdout-path, Lucas Stach
- [PATCH 03/12] tegra: colibri-t20: set hostname in board init, Lucas Stach
- [PATCH 09/12] serial: ns16550: enable clock if available, Lucas Stach
- [PATCH 10/12] serial: ns16550: add Tegra support, Lucas Stach
- [PATCH 07/12] tegra: tegra124: add serial alias nodes, Lucas Stach
- [PATCH 08/12] tegra: jetson-tk1: add stdout-path, Lucas Stach
- [PATCH 11/12] tegra: remove custom UART setup, Lucas Stach
- [PATCH 12/12] clk: tegra: don't enable UART clocks by default, Lucas Stach
- [PATCH 04/12] tegra: beaver: switch to upstream Tegra30 dtsi, Lucas Stach
- Re: [PATCH 01/12] tegra: beaver: set hostname in board init, Sascha Hauer
- [PATCH] fixup! tegra: jetson-tk1: enable 1.05V_RUN,
Lucas Stach
- [PATCHv2 1/3] of: Add of_device_enable_and_register functions,
Teresa Gámez
- phy-addr via dt,
Wjatscheslaw Stoljarski (Slawa)
- [For next PATCH] ARM: dts: phyFLEX: Add SKEW clock delays to emac0 node,
Wadim Egorov
- [For next PATCH v2 1/2] arm: am33xx: Add rmii2_crs_dv mux selection in SMA2 register,
Wadim Egorov
- [PATCH 00/13] Tegra124 PCIe,
Lucas Stach
- [PATCH 02/13] net: rtl8169: clean receive buffer after net handler, Lucas Stach
- [PATCH 01/13] net: rtl8169: add support for RTL-8168/8111g, Lucas Stach
- [PATCH 04/13] pinctrl: tegra: try to select "boot" state, Lucas Stach
- [PATCH 03/13] tegra: defconfig: enable barebox OF drivers, Lucas Stach
- [PATCH 06/13] clk: tegra: slow down MSELECT to 102MHz, Lucas Stach
- [PATCH 08/13] tegra: jetson-tk1: enable 1.05V_RUN, Lucas Stach
- [PATCH 07/13] tegra: pmc: work around power domain failure, Lucas Stach
- [PATCH 10/13] clk: tegra124: add PCIe clocks, Lucas Stach
- [PATCH 13/13] pci: tegra: add tegra124 support, Lucas Stach
- [PATCH 09/13] clk: tegra124: add PLLE setup functions, Lucas Stach
- [PATCH 12/13] pinctrl: tegra: add XUSB pad controller, Lucas Stach
- [PATCH 11/13] add generic PHY framework, Lucas Stach
- [PATCH 05/13] arm: dts: jetson-tk1: switch to upstream DT, Lucas Stach
- Re: [PATCH 00/13] Tegra124 PCIe, Sascha Hauer
- [For next PATCH] boards: defaultenv: Fix nand bootargs for AM335x boards.,
Teresa Gámez
- [PATCH 0/2] fix typos (import from linux kernel),
Antony Pavlov
- [For next PATCH 1/3] of: Add of_register_disabled_device functions,
Teresa Gámez
- [For next PATCH 1/2] arm: am33xx: Add rmii2_crs_dv mux selection in SMA2 register,
Wadim Egorov
- [PATCH] serial: ns16550: Remove unused fields from NS16550_plat structure,
Alexander Shiyan
- [PATCH] treewide: Reuse init_clock() return value for clocksource drivers,
Alexander Shiyan
- [PATCH] Documentation: dts: add missed Ingenic Semiconductor vendor prefix, Antony Pavlov
- [PATCH] ARM: atmel: add sama5d4 xplained ultra board support,
Bo Shen
- [PATCH 1/2] net: phy: micrel: Add OF conf. support for ksz9031,
Wadim Egorov
- [PATCH 1/2] filetype: Add XZ filetype support,
Sascha Hauer
- [PATCH 0/3] fixes and sanity checks for mxs pinmuxing,
Uwe Kleine-König
- [PATCH] saveenv: Fix saving to specified file, Sascha Hauer
- [PATCH] ARM: imx23-olinuxino: discover usb before ifup,
Dmitry Voytik
- [PATCH 1/2] ARM i.MX6: mmdc: Only print calibration values of enabled phys,
Sascha Hauer
- [PATCH] include/environment.h: Add missing include, Sascha Hauer
- [PATCH] EFI: report correct block device size,
Michael Olbrich
- LPC43xx,
Alexander Shiyan
- [PATCH 1/7] imx: ipu-v3: fix typo leading to build warning,
Lucas Stach
- [PATCH 1/2] reset_source: add thermal reset,
Lucas Stach
- [PATCH] usb: ehci-hcd: Correct CLEAR_FEATURE code,
Dmitry Voytik
- [PATCH] fixup! Update .mailmap using scripts/mailmapper,
Antony Pavlov
- [PATCH 0/3] Add .mailmap file and a tool to maintain it,
Antony Pavlov
- AM335x mehrere MMC-Bootquellen,
Matthias Feser
- [PATCH] lib: parameter: fixed doku renamed ip -> ipaddr,
Rolf Evers-Fischer
- [PATCH 1/6] ARM: defconfig: Enable of_display_timings in am335x_defconfig,
Teresa Gámez
- Wrong relocation with Mini2440,
luigi origa
- [PATCH 0/2] mips: qemu-malta: add little-endian mode support,
Antony Pavlov
- [PATCH] commands: firmwareload: add CMD_GROUP,
Steffen Trumtrar
- [PATCH 1/4] firmware: Add missing include,
Sascha Hauer
- [PATCH] param: let dev_add_param return the newly created param, Sascha Hauer
- [PATCH 1/6] fs: store pointer to fsdev instead of dev in struct filep,
Sascha Hauer
- [PATCH 1/2] led: trigger: use max_value to turn on led instead of hardcoded '1',
Sascha Hauer
- [PATCH 1/5] ARM: nitrogen6x: whitespace cleanup,
Sascha Hauer
- [PATCH] input: Let input support depend on !CONSOLE_NONE, Sascha Hauer
- most xxx_defconfig stop linking when console support set to CONSOLE_NONE,
Kevin Du Huanpeng
- [no subject], Kevin Du Huanpeng
- [PATCH] clock.c: fix whitespaces,
Antony Pavlov
- [RFC] Add PowerPC MPC5125 support,
Juergen Borleis
- [PATCH 06/19] arch/MPC5xxx: move away existing files to be able to add a new SoC type, Juergen Borleis
- [PATCH 05/19] arch/MPC5xxx: just a format clean up, Juergen Borleis
- [PATCH 04/19] arch/MPC5xxx: Simplify the calculation, Juergen Borleis
- [PATCH 03/19] arch/MPC5xxx: replace 'depends on' by 'select', Juergen Borleis
- [PATCH 11/19] MPC5xxx/serial: provide an easier way to share register description, Juergen Borleis
- [PATCH 10/19] MPC5xxx/serial: use dedicated I/O functions instead of memory access, Juergen Borleis
- [PATCH 08/19] arch/MPC5xxx: separate clock functions, Juergen Borleis
- [PATCH 13/19] MPC5xxx/serial: re-factor the code to share it between MPC5200/MPC5125, Juergen Borleis
- [PATCH 02/19] arch/MPC5xxx: use a mach specific linker script instead of a board specific one, Juergen Borleis
- [PATCH 09/19] arch/MPC5xxx: just use macros instead of anonymous digits, Juergen Borleis
- [PATCH 15/19] arch/MPC5xxx: add MPC5125 to the build-system, Juergen Borleis
- [PATCH 01/19] arch/MPC5xxx: fix linker script for MPC5200, Juergen Borleis
- [PATCH 12/19] MPC5xxx/serial: use new shared register description, Juergen Borleis
- [PATCH 14/19] arch/MPC5xxx: add MPC5125 SoC support, Juergen Borleis
- [PATCH 18/19] MPC5125/WDG: add a watchdog driver, Juergen Borleis
- [PATCH 07/19] arch/MPC5xxx: separate architecture's main SoC header file, Juergen Borleis
- [PATCH 16/19] MPC5xxx/serial: add support for the MPC5125 SoC, Juergen Borleis
- [PATCH 19/19] MPC5125/GPIO: add a generic GPIO driver, Juergen Borleis
- [PATCH 17/19] MPC5125/FEC: add another FEC driver for the MPC5125 SoC, Juergen Borleis
- [PATCH 0/4] Add phyFLEX-AM335x support,
Teresa Gámez
- [PATCH 1/2] ARM: tegra30: add environment path to Beaver DT,
Lucas Stach
- [PATCH v2 00/19] PCI and Tegra series revamp,
Lucas Stach
- [PATCH v2 01/19] MIPS: malta: fix pci IO resource assignment, Lucas Stach
- [PATCH v2 03/19] pci: add resource enum, Lucas Stach
- [PATCH v2 06/19] pci: defer device registration until after bridge setup, Lucas Stach
- [PATCH v2 02/19] pci: split out device init, Lucas Stach
- [PATCH v2 12/19] i2c: tegra: move to fs initcall, Lucas Stach
- [PATCH v2 13/19] ARM: tegra: beaver: enable PEX voltage rail, Lucas Stach
- [PATCH v2 09/19] commands: lspci: go down into subordinate busses, Lucas Stach
- [PATCH v2 07/19] pci: prettyprint device names, Lucas Stach
- [PATCH v2 08/19] pci: track parent<->child relationship, Lucas Stach
- [PATCH v2 04/19] pci: properly populate prefetchable BARs, Lucas Stach
- [PATCH v2 17/19] ARM: tegra: advertise PCI support, Lucas Stach
- [PATCH v2 11/19] clk: tegra30: add PCIe clocks, Lucas Stach
- [PATCH v2 10/19] clk: tegra: add PLLE setup functions, Lucas Stach
- [PATCH v2 05/19] pci: setup bridges and traverse buses behind them, Lucas Stach
- [PATCH v2 15/19] of: import pci range parser from linux, Lucas Stach
- [PATCH v2 14/19] tegra: pmc: add powerdomain handling, Lucas Stach
- [PATCH v2 16/19] pci: add Tegra host controller driver, Lucas Stach
- [PATCH v2 19/19] ARM: tegra: enable network related options in defconfig, Lucas Stach
- [PATCH v2 18/19] net: add rtl8169 driver, Lucas Stach
- Re: [PATCH v2 00/19] PCI and Tegra series revamp, Sascha Hauer
- at91 usbserial issue,
Grégory Hermant
- [PATCH] commands: select FILE_LIST for usbgadget,
Robert Schwebel
- v2014.10.0, Sascha Hauer
- [PATCH 0/2] Increamental fixes for the PCI series,
Lucas Stach
- [PATCH] i2c: omap: fix dts property "clock-frequency" usage,
Teresa Gámez
- Newbie question,
Masahiro Yamada
- Little bug,
luigi origa
dmesg Support,
Sascha Hauer
AM335x patches,
Sascha Hauer
[PATCHv3 1/5] of: base: Add for_each_node_by_name_from,
Teresa Gámez
[PATCH] commands: usb: drop help for force rescan option,
Wjatscheslaw Stoljarski (Slawa)
[PATCHv2] commands: add of_display_timings,
Teresa Gámez
MUSB support,
Sascha Hauer
[PATCH 00/15] PCI bridges and Tegra PCI stuff,
Lucas Stach
- [PATCH 05/15] pci: prettyprint device names, Lucas Stach
- [PATCH 06/15] pci: track parent<->child relationship, Lucas Stach
- [PATCH 02/15] pci: add resource enum, Lucas Stach
- [PATCH 01/15] pci: split out device init, Lucas Stach
- [PATCH 10/15] i2c: tegra: move to fs initcall, Lucas Stach
- [PATCH 15/15] ARM: tegra: advertise PCI support, Lucas Stach
- [PATCH 11/15] ARM: tegra: beaver: enable PEX voltage rail, Lucas Stach
- [PATCH 07/15] commands: lspci: go down into subordinate busses, Lucas Stach
- [PATCH 03/15] pci: properly populate prefetchable BARs, Lucas Stach
- [PATCH 12/15] tegra: pmc: add powerdomain handling, Lucas Stach
- [PATCH 13/15] of: import pci range parser from linux, Lucas Stach
- [PATCH 09/15] clk: tegra30: add PCIe clocks, Lucas Stach
- [PATCH 08/15] clk: tegra: add PLLE setup functions, Lucas Stach
- [PATCH 04/15] pci: setup bridges and traverse buses behind them, Lucas Stach
- [PATCH 14/15] pci: add Tegra host controller driver, Lucas Stach
- Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff, Antony Pavlov
[PATCH] USB: gadget: dfu: Add max_speed to dfu_driver, Sascha Hauer
[PATCH] USB: gadget: fastboot: Add missing include, Sascha Hauer
nvidia jetson tk1 help,
Ryan Du Bois
[PATCH] imx-image: handle i.MX35 special case,
Eric Bénard
[PATCH] imx35-regs: add UART2 to CCM defines,
Eric Bénard
[PATCH] of: fdt: fix typo in header,
Raphaël Poggi
[PATCH] i2c: at91: fix coding style issue,
Raphaël Poggi
[PATCH 1/2] of: Added of_set_property_to_child_phandle,
Teresa Gámez
[PATCH] read_file_2: Fix return value,
Teresa Gámez
[PATCH v2 0/4] ARM: at91: add sama5d4ek board support,
Bo Shen
Subject: [PATCH] cfi: print size in human readable format,
Franck Jullien
[PATCH] ARM: defconfig: remove board specific mvebu defconfigs, Sascha Hauer
imx-image & i.MX35,
Eric Bénard
[PATCH 1/2] serial-imx: fix for non of usage,
Eric Bénard
[PATCH] efi: use objcopy with CROSS_COMPILE prefix,
Michael Olbrich
net: phy updates,
Sascha Hauer
[PATCH v2 0/6] mvebu multi SoC support,
Sebastian Hesselbarth
[PATCH] i2c: at91: add support of device tree,
Raphaël Poggi
[PATCH] net: Call edev->recv with correct eth_device, Sascha Hauer
[PATCH v2 0/4] KaRo TX6u support,
Steffen Trumtrar
[PATCH 0/9] ARM: at91: add sama5d4ek board support,
Bo Shen
- [PATCH 5/9] net: macb: using default value for FBLDO, Bo Shen
- [PATCH 1/9] ARM: at91: move pmc base address into soc header, Bo Shen
- [PATCH 6/9] mci: atmel: add new ip version 0x600 support, Bo Shen
- [PATCH 2/9] ARM: atmel: sama5d3 is a family member of sama5, Bo Shen
- [PATCH 3/9] ARM: at91: clock: use cpu_has_pcr for pcr1 checking, Bo Shen
- [PATCH 4/9] nand: atmel: runtime to generate galois table, Bo Shen
- [PATCH 8/9] ARM: at91: add sama5d4 soc support #2, Bo Shen
- [PATCH 7/9] ARM: at91: add sama5d4 soc support #1, Bo Shen
- [PATCH 9/9] ARM: at91: add sama5d4ek board support, Bo Shen
- Re: [PATCH 0/9] ARM: at91: add sama5d4ek board support, Sascha Hauer
[PATCH 1/4] imx-usb-loader: Skip unknown tags,
Steffen Trumtrar
[PATCH v2 1/2] phy: marvell: move IDs to own header,
Lucas Stach
[PATCH] net: asix: handle packets crossing URB boundaries,
Rolf Evers-Fischer
[PATCH] double requested gpio problem,
Silvio Fricke
[PATCH] Makefile: enable Werror=implicit-function-declaration,
Lucas Stach
[PATCH 1/2] phy: marvell: move IDs to own header,
Lucas Stach
[PATCH 1/4] phy/micrel: disable Asym_Pause support,
Christian Hemp
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]