If booted from serial via xmodem, also get barebox.bin per xmodem
For first stage you need the .pblx file instead of MLO.
Signed-off-by: Jan Weitzel <j.weitzel@xxxxxxxxx>
---
arch/arm/mach-omap/Kconfig | 7 +++++++
arch/arm/mach-omap/xload.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index f9b5ec3..953dd8f 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -118,6 +118,13 @@ config OMAP4_USBBOOT
You need the utility program omap4_usbboot to boot from USB.
Please read omap4_usb_booting.txt for more information.
+config OMAP_SERIALBOOT
+ bool
+ default y
+ select XYMODEM
+ select FS_RAMFS
+ depends on ARCH_AM33XX && SHELL_NONE
+
config OMAP_MULTI_BOARDS
bool "Allow multiple boards to be selected"
select HAVE_DEFAULT_ENVIRONMENT_NEW
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index e9d7bbb..8d9d84c 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -11,6 +11,7 @@
#include <sizes.h>
#include <malloc.h>
#include <filetype.h>
+#include <xymodem.h>
#include <mach/generic.h>
struct omap_barebox_part *barebox_part;
@@ -184,6 +185,45 @@ static void *omap4_xload_boot_usb(void){
return buf;
}
+static void *omap_serial_boot(void){
+ struct console_device *cdev;
+ int ret;
+ void *buf;
+ int len;
+ int fd;
+
+ /* need temporary place to store file */
+ ret = mount("none", "ramfs", "/", NULL);
+ if (ret < 0) {
+ printf("failed to mount ramfs\n");
+ return NULL;
+ }
+
+ cdev = console_get_first_active();
+ if (!cdev) {
+ printf("failed to get console\n");
+ return NULL;
+ }
+
+ fd = open("/barebox.bin", O_WRONLY | O_CREAT);
+ if (fd < 0) {
+ printf("could not create barebox.bin\n");
+ return NULL;
+ }
+
+ ret = do_load_serial_xmodem(cdev, fd);
+ if (ret < 0) {
+ printf("loadx failed\n");
+ return NULL;
+ }
+
+ buf = read_file("/barebox.bin", &len);
+ if (!buf)
+ printf("could not read barebox.bin from serial\n");
+
+ return buf;
+}
+
/*
* Replaces the default shell in xload configuration
*/
@@ -218,6 +258,12 @@ static __noreturn int omap_xload(void)
func = omap_xload_boot_spi(barebox_part->nor_offset,
barebox_part->nor_size);
break;
+ case BOOTSOURCE_SERIAL:
+ if (IS_ENABLED(CONFIG_OMAP_SERIALBOOT)) {
+ printf("booting from serial\n");
+ func = omap_serial_boot();
+ break;
+ }
default:
printf("unknown boot source. Fall back to nand\n");
func = omap_xload_boot_nand(barebox_part->nand_offset,
--
1.9.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
