U-Boot V2 Development (Barebox)

• Thread Index

• [PATCH master 1/3] pci: efi: skip driver model fixup for non-EFI PCI busses
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] arm: rockchip: rk3568: fix mmc boot source instances
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] pinctrl: rockchip: use alias rather than full of name
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] arm: rockchip: rk3568: fix mmc boot source instances
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 3/3] pinctrl: rockchip: use alias rather than full of name
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 0/3] arm: rockchip: minor fixes as preparation for mainline dts
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 2/3] net: designware: rockchip: remove unnecessary clock pclk_xpcs
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 1/3] arm: rockchip: rk3568: fix mmc boot source instances
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [FIXUP 2/2] fixup! arm: rockchip: add support for the quartz64 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [FIXUP 1/2] fixup! arm: rockchip: add support for the quartz64 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [FIXUP 0/2] arm: rockchip: add support for the quartz64 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] include/phy: add driver_data to resume more of kernel code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/1] arm: rockchip: add support for the quartz64 board
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [Barebox] Polling infrastructure causes reentrancy problem
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 0/1] arm: rockchip: add support for the quartz64 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH] arm: rockchip: add support for the quartz64 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH master] mci: dw_mmc: make reset control optional again
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: add STM32 SPI controller driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [Barebox] Polling infrastructure causes reentrancy problem
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH master] mci: dw_mmc: make reset control optional again
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] ARM64: <asm/barebox-arm-head.h>: mark prologue location
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: socfpga: Use upstream compatible strings
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 5/9] ARM64: <asm/barebox-arm-head.h>: mark prologue location
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/9] ARM: Rockchip: init: propagate error in init function
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/9] fixup! scripts/common: Add write_full() and read_full()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/9] ARM: Rockchip: rk3568: make rk3568_lowlevel_init void
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] ARM: Rockchip: make rk3568's atf_load_bl31 reusable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 9/9] ARM: Rockchip: add delimiter between boards and board features
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/9] pinctrl: Rockchip: abort probe on lack of aliases
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/9] fixup! scripts: Add rk-usb-loader tool
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/9] clk: handle CLK_OF_DECLARE in deep probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [Barebox] Polling infrastructure causes reentrancy problem
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/2] ARM: Terasic SoCkit: Use upstream compatible string
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 0/2] ARM: socfpga: Use upstream compatible strings
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 1/2] ARM: Terasic DE0-Nano-SoC/Atlas-SoC: Use upstream compatible string
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH v3] Fix problem with imx_ddrc_sdram_size calc
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: add STM32 SPI controller driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] spi: add STM32 SPI controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: Inconsistent "compatible" string for Terasic DE0-Nano-SoC / Atlas SoC Kit
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] memory commands: Improve command documentation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: do we need regmap-i2c in barebox?
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [just draft RFC] rtc: add simple pcf85363 driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: do we need regmap-i2c in barebox?
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• do we need regmap-i2c in barebox?
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Inconsistent "compatible" string for Terasic DE0-Nano-SoC / Atlas SoC Kit
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] memory commands: Improve command documentation
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] ARM: socfpga: Set reset-names property for &mmc
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH master] mci: dw_mmc: make reset control optional again
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH master] mci: dw_mmc: make reset control optional again
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: Set reset-names property for &mmc
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: Set reset-names property for &mmc
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: Set reset-names property for &mmc
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] mci: dw_mmc: make reset control optional again
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: socfpga: Set reset-names property for &mmc
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH v4] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3] Fix problem with imx_ddrc_sdram_size calc
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH 0/9] COMPILE_TEST: fix misc issues
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drivers: caam: remove license text covered by SPDX-License-Identifier
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] misc: acpi-test: bump down debug message on remove
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: replace zero-valued variable use with zero directly
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] ARM: i.MX8M: nxp-imx8mn-evk: use regular i2c read for device detection
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] include: <linux/bitops.h>: discard left-over hweight code
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: ramfs: drop free of unused dev->priv
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] imd fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! scripts: Add common library functions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] driver: implement dev_err_probe()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/9] mtd: remove NULLness check for IOMEM()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/9] ARM: i.MX: guf-santaro: fix passing around of uninitialized variable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/9] clocksource: clint: restrict to RISC-V
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/9] ddr: fsl: make ARCH_LAYERSCAPE only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 9/9] i2c-mux-pca954x: drop duplicate warning message on probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] reset: socfpga: error out on failure to request memory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/9] regulator: fix bitrotted EXPORT_SYMBOL_GPL
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/9] aiodev: fix bitrotted EXPORT_SYMBOL
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/9] ARM: Rockchip: move ARCH_RK3568_OPTEE into ARCH_ROCKCHIP menu
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/9] COMPILE_TEST: fix misc issues
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] drivers: add missing SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] i2c: algo-bit: switch to SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] hw_random: mxc-rngc: switch to SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] drivers: caam: remove license text covered by SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] usb: dwc3: remove unneeded EPROBE_DEFER check
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] misc: acpi-test: bump down debug message on remove
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] serial: atmel: abort probe on atmel_serial_init_port failure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] spi: zynq_qspi: don't check clk_get return value for NULLness
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] I2C: i.MX: early: replace zero-valued variable use with zero directly
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] ARM: i.MX8M: nxp-imx8mn-evk: use regular i2c read for device detection
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] include: add dedicated header for printf/printk
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] include: move ARRAY_AND_SIZE to <linux/kernel.h>
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] include: <asm-generic/bug.h>: make self-contained
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] scripts: <linux/bitops.h>: fix references to undefined __BITS_PER_LONG
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] include: <linux/bitops.h>: discard left-over hweight code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fs: ramfs: drop free of unused dev->priv
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size
  • From: Joacim Zetterling <joaze@xxxxxxxxxxxx>
• Re: [PATCH 4/4] bareboximd: make the '-c' option work again
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 4/4] bareboximd: make the '-c' option work again
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/4] imd fixes
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/4] include/image-metadata.h: fix whitespaces in the BAREBOX_IMD_CRC macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/4] bareboximd: make the '-c' option work again
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/4] imd: fix imd_is_crc32()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/4] imd: reuse imd_is_crc32()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 3/3] imx-usb-loader: Add support for i.MX8MP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] imx-usb-loader: Drop nearly unused struct usb_id
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! scripts: Add common library functions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: reboot-mode: fix typos
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: rpi_defconfig: Enable PHY core for dwc2 USB driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] Documentation: reboot-mode: fix typos
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH v3] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] usb: dwc2: Make having a phy optional
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 1/2 v2] usb: dwc2: Make having a phy optional
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• [PATCH v2] ARM: rpi_defconfig: Enable PHY core for dwc2 USB driver
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• Re: [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] usb: dwc2: Make having a phy optional
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH master] ARM: psci: client: fix power off and reset via 64-bit secure monitor
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH master] ARM: psci: client: fix power off and reset via 64-bit secure monitor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/1] gpio: add driver for xilinx zynq and zynqmp
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Support usb booting on i.MX8MP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] include/phy: add driver_data to resume more of kernel code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/1] gpio: add driver for xilinx zynq and zynqmp
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2 0/1] gpio: add driver for xilinx zynq and zynqmp
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] include/phy: add driver_data to resume more of kernel code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] net: phy: micrel: port clock select support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] include/phy: add driver_data to resume more of kernel code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] common: Kconfig: fix typos
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 1/2] common: Kconfig: fix typos
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 2/2] common: Kconfig: fix indentation
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] cdev: Add function to get unallocated start of device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] imx-bbu-nand-fcb: Save bootloader location into device parameters
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] cdev: Add function to get unallocated start of device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] of: partitions: Skip fixup for devices with no partitions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] nandtest: Add more fields when bad byte found
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: ksz8864: Add support for KSZ87xx switches
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] fixup! scripts: Add rk-usb-loader tool
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Rockchip: fix path to rkbin firmware in documentation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2 0/8] RK3568 updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] phy: rockchip-inno-usb2: handle disabled child nodes gracefully
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: rk3568: Detect USB boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: Rockchip: RK3568: implement failsafe barebox update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/8] cdev: Add function to get unallocated start of device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] ARM: Rockchip: rk3568 EVB: use 64bit partition sizes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] phy: rockchip: Add dummy driver for child node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] usb: dwc3: reset controller before using it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] ARM: Rockchip rk3568 EVB: Enable deep probe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 7/9] ARM: rk3568: Detect USB boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: dwc3: Clarify error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] scripts: Add common library functions
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH 6/9] usb: dwc3: Clarify error message
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] ARM: rk3568: Detect USB boot
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] net: ksz8864: Add support for KSZ87xx switches
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] nandtest: Add more fields when bad byte found
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] of: partitions: Skip fixup for devices with no partitions
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] imx-bbu-nand-fcb: Save bootloader location into device parameters
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] imx-bbu-nand-fcb: Show additional information from decoded FCB
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] fixup! scripts: Add rk-usb-loader tool
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] scripts: add target tool for rk-usb-loader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] scripts: Add common library functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] scripts: Add common library functions
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH] ARM: Rockchip: fix path to rkbin firmware in documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] ARM: Rockchip: RK3568: implement failsafe barebox update
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] scripts: Add rk-usb-loader tool
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] logo: Makefile: Replace inkscape with convert
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] add noswitch support for skov boards
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: yocto integration - best practice
  • From: Enrico Jörns <ejo@xxxxxxxxxxxxxx>
• Re: yocto integration - best practice
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 7/9] ARM: rk3568: Detect USB boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/9] phy: rockchip-inno-usb2: handle disabled child nodes gracefully
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/9] usb: dwc3: reset controller before using it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 9/9] ARM: Rockchip: RK3568: implement failsafe barebox update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/9] usb: dwc3: Clarify error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/9] ARM: Rockchip rk3568 EVB: Enable deep probe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/9] phy: rockchip: Add dummy driver for child node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/9] ARM: Rockchip: rk3568 EVB: use 64bit partition sizes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/9] cdev: Add function to get unallocated start of device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/9] RK3568 updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] devfs: Do not create overlapping partitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] scripts: Add rk-usb-loader tool
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] scripts: Add rk-usb-loader tool
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• yocto integration - best practice
  • From: Konstantin Kletschke <konstantin.kletschke@xxxxxxxxxxxxx>
• Re: [RFC PATCH] logo: Makefile: Replace inkscape with convert
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [RFC PATCH] logo: Makefile: Replace inkscape with convert
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: inkscape 1.1.1 issue
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: inkscape 1.1.1 issue
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: inkscape 1.1.1 issue
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• v2021.10.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] Documentation/boards/riscv.rst: fix code blocks
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 5/5] scripts: Add rk-usb-loader tool
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] scripts: Add common library functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] scripts: Add Kconfig option for most host tools
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/5] scripts: Common functions for host tools and rk-usb-loader
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] scripts/common: Add write_file()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] scripts/common: Add write_full() and read_full()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: inkscape 1.1.1 issue
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• inkscape 1.1.1 issue
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v4 8/8] ARM: boards: skov-imx6: use separate DTS for the iMX6 Solo variant
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 6/8] ARM: boards: skov-imx6: start using deep-probe
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/8] ARM: dts: skov-imx6: add USB nodes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 0/8] add noswitch support for skov boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] ARM: boards: skov-imx6: add switch detection
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 5/8] ARM: boards: skov-imx6: fixup different DTS variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: smc: disable -c (start cpu) test option for ARMv8
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] commands: smc: disable -c (start cpu) test option for ARMv8
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: force 16-bit wchar_t treewide
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/8] ARM: i.MX8M: add nano support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] kbuild: force 16-bit wchar_t treewide
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] ARM: at91: sama5d27_som1_ek: populate MAC address from EEPROM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] RISC-V: virt: support poweroff/restart on tinyemu
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX8MP: move SCTR enabling into imx8mp_cpu_lowlevel_init
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH RESEND v4 0/8] RISC-V: add LiteX SoC support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] video: simplefb-client: populate video mode field
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eqos: let phy_resume handle fixed link phys
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: framebuffer: remove note about lack of backlight support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/6] protonic: maintaining and new board
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] state: backend_raw: fix ignoring unpack failures
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: core: fix whitespaces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] of: overlay: don't do fixups on empty global.of.overlay.dir
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: cpsw: fix ethernet bringup in case of a fixed-link phy
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mci: sdhci: fix big-endian write for blockcount/size
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] video: Fix broken bcm2835 fb driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] blspec: fix use-after-free of firmware search path
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: remove unused struct fs_device_d::parent_device
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: Typo fix in command example
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] usb: dwc2: Make having a phy optional
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] mtd: core: fix whitespaces
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: 'of_compatible' and 'model' imd records are unusable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] debug_ll: ns16550: Fix interrupt disable on init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: 'of_compatible' and 'model' imd records are unusable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: 'of_compatible' and 'model' imd records are unusable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: document arm_setup_stack() pitfalls
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] common: remove !SANDBOX dependency for target tools
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] virtio: implement remove callbacks
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: Improve error message for non-existent vmmc regulator
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1] net: dhcp: send current hostname as part of the DHCP request
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master v2] base: driver: fix double removal of child devices
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: add virtio network driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: 'of_compatible' and 'model' imd records are unusable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] fixup! console: add new CONFIG_CONSOLE_DISABLE_INPUT option
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] power: reset: nvmem-reboot-mode: disable device tree fixup
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Documentation: reboot-mode: add note about /env/bmode
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] kbuild: dtc: Allow adding device tree fragments via config
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• 'of_compatible' and 'model' imd records are unusable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 8/8] RISC-V: add litex_linux_defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 6/8] net: add LiteEth driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 5/8] spi: add litex spiflash driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 4/8] gpio: add driver for 74xx-ICs with MMIO access
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/8] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 8/8] ARM: i.MX8MN: add i.MX8MN-EVK support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/8] ddr: imx8m: add i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/8] clk: imx: add i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 6/8] ddr: imx8m: ddrphy_train: add DDR4 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 7/8] scripts: imx: add i.MX8MN support to imx-image
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/8] ARM: i.MX8MN: adapt early clock support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/8] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/8] ARM: i.MX8M: add nano support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v=2] serial: implement riscv SBI console support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] pbl/Kconfig: fix typo "inflluences" -> "influences"
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] pbl/Kconfig: fix typo "inflluences" -> "influences"
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH] serial: implement riscv SBI console support
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• [PATCH v=2] serial: implement riscv SBI console support
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• Re: Fwd: [PATCH] serial: implement riscv SBI console support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: CRC32 verification on NAND flash
  • From: Yunus Bas <Y.Bas@xxxxxxxxx>
• Fwd: [PATCH] serial: implement riscv SBI console support
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• Re: [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: CRC32 verification on NAND flash
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] kbuild: dtc: Allow adding device tree fragments via config
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] Documentation: boards: at91: remove done TODOs
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] ARM: at91: sama5d27_som1_ek: populate MAC address from EEPROM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v2] Documentation: reboot-mode: add note about /env/bmode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] power: reset: nvmem-reboot-mode: disable device tree fixup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] Documentation: reboot-mode: add note about /env/bmode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: at91 sama5d3 "regressions"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH master 2/2] common: menutree: prevent read of uninitialized memory in error path
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: at91 sama5d3 "regressions"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/5] fs: fat: pbl: support >32M alignment for first partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 2/5] ARM: at91: at91sam9263ek: add device tree check for board code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: AT91: migrate sama5d3-xplained to DT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: at91: sam9_smc: register driver earlier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] Documentation: boards: at91: remove done TODOs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• CRC32 verification on NAND flash
  • From: Yunus Bas <Y.Bas@xxxxxxxxx>
• Re: [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• [PATCH v3 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 5/7] ARM: boards: skov-imx6: fixup different DTS variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] add noswitch support for skov boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] ARM: dts: skov-imx6: add USB nodes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] ARM: boards: skov-imx6: start using deep-probe
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: at91 sama5d3 "regressions"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: at91 sama5d3 "regressions"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 4/4] lds: the RO_DATA_SECTION macro does not work on my SAMA5D3 board
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 2/4] ARM: copy data if there is a region overlap
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/4] common.h: reintroduce region_overlap() as, old_region_overlap()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• at91 sama5d3 "regressions"
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 1/4] common: remove !SANDBOX dependency for target tools
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] common: add new menu for target tools
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] scripts: allow building USB loader tools for target as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] scripts: omap3-usb-loader: make proper use of pkg-config --cflags
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3] ARM: document arm_setup_stack() pitfalls
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• Re: [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option
  • From: Christian Melki <christian.melki@xxxxxxxxxx>
• Re: [PATCH v2] ARM: document arm_setup_stack() pitfalls
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: document arm_setup_stack() pitfalls
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2] ARM: document arm_setup_stack() pitfalls
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] mci-bcm2835: Fix return type handling of bcm2835_mci_wait_command_done()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: document arm_stack_setup() pitfalls
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] RISC-V: virt: support poweroff/restart on tinyemu
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] virtio: implement remove callbacks
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! net: add virtio network driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• Re: New RISCV board (cartesi-machine)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• New RISCV board (cartesi-machine)
  • From: Marcelo Politzer <marcelo.politzer@xxxxxxxxxx>
• [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] common: machine_id: support /chosen/barebox, machine-id-path override
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] scripts: unify libusb.h inclusion
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Enrico Jörns <ejo@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] scripts: unify libusb.h inclusion
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] common: add new menu for target tools
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 3/4] scripts: unify libusb.h inclusion
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] common: remove !SANDBOX dependency for target tools
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] common: add new menu for target tools
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] scripts: allow building USB loader tools for target as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: Improve error message for non-existent vmmc regulator
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: remove unused struct fs_device_d::parent_device
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: remove unused struct fs_device_d::parent_device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: Improve error message for non-existent vmmc regulator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: remove unused struct fs_device_d::parent_device
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] net: dhcp: send current hostname as part of the DHCP request
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] gpio: add driver for xilinx zynq and zynqmp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 1/2] gpio: add driver for xilinx zynq and zynqmp
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 0/2] gpio: add driver for xilinx zynq and zynqmp
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm: zynqmp: add boot source support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: zynqmp: add boot source support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: zynqmp: add boot source support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: zynqmp: add boot source support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH master] base: driver: fix double removal of child devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master v2] base: driver: fix double removal of child devices
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH master] base: driver: fix double removal of child devices
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] net: add virtio network driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] fs: remove unused struct fs_device_d::parent_device
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH master] blspec: fix use-after-free of firmware search path
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH master] base: driver: fix double removal of child devices
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Anže Lešnik <anze.lesnik@xxxxxxxxx>
• Re: [PATCH 3/3] arm: zynqmp: add boot source support
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 3/3] arm: zynqmp: add boot source support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 1/3] arm: zynqmp: add support for xilinx zcu106 board
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 2/3] Documentation: boards: zynqmp: fix broken links
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH 0/3] arm: zynqmp: add support for zcu106 and boot sources
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: barebox environment early loading
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• barebox environment early loading
  • From: Dusan Radic <dusrad@xxxxxxxxx>
• Re: [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v1 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/8] ARM: dts: skov-imx6: add USB nodes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 6/8] ARM: boards: skov-imx6: start using deep-probe
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/8] ARM: boards: skov-imx6: add switch detection
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 7/8] ARM: boards: skov-imx6: set net.ifup_force_detect if no switch is detected
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 5/8] ARM: boards: skov-imx6: fixup different DTS variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] kbuild: dtc: Allow adding device tree fragments via config
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• Re: [PATCH] video: Fix broken bcm2835 fb driver
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 1/2 v2] usb: dwc2: Make having a phy optional
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• Re: [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Anže Lešnik <anze.lesnik@xxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc2: Make having a phy optional
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] Documentation: Typo fix in command example
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 2/2] ARM: rpi_defconfig: Enable PHY core for dwc2 usb driver
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• [PATCH 1/2] usb: dwc2: Make having a phy optional
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• [PATCH 0/2] usb: dwc2: fix phy dependecy
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• [PATCH] Documentation: Typo fix in command example
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] Documentation: Replace ENTRY_POINT with ENTRY_FUNCTION
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] video: Fix broken bcm2835 fb driver
  • From: Daniel Brát <danek.brat@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX8MP: bbu: use correct offset for eMMC boot partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/9] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/9] clk: imx: add i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/9] ddr: imx8m: ddrphy_train: add DDR4 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/9] ARM: i.MX8M: add nano support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] scripts: imx: add i.MX8MN support to imx-image
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 9/9] ARM: i.MX8MN: add i.MX8MN-EVK support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/9] ddr: imx8m: add i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/9] ARM: i.MX8MN: adapt early clock support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH master] of: overlay: don't do fixups on empty global.of.overlay.dir
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] net: cpsw: fix ethernet bringup in case of a fixed-link phy
  • From: "Karfich, Oleg" <Oleg.Karfich@xxxxxxxx>
• Re: [PATCH v2 1/3] ARM: i.MX8MP: bbu: fix wrong flash header offset for eMMC boot partition
  • From: Rouven Czerwinski <rcz@xxxxxxxxxxxxxx>
• [PATCH v2] mci: sdhci: fix big-endian write for blockcount/size
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] ARM: i.MX8MP: move SCTR enabling into imx8mp_cpu_lowlevel_init
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: i.MX8MP: bbu: fix wrong flash header offset for eMMC boot partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: i.MX8MP: EVK: change bbu handler from eMMC user to boot partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX8MP: bbu: use correct offset for eMMC boot partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] state: backend_raw: fix ignoring unpack failures
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 0/6] protonic: maintaining and new board
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: remove use-large-blocks left over
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] Documentation: framebuffer: remove note about lack of backlight support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eqos: let phy_resume handle fixed link phys
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] net: eqos: let phy_resume handle fixed link phys
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] usb: imx-us-phy: add vbus_valid ro parameter
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/2] video: simplefb-client: populate video mode field
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] video: simplefb-client: make probe less verbose
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] ARM: mmu: use reserve mem entries to modify maps
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] PBL: enable LIBFDT for OP-TEE early loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• v2021.08.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: rockchip-rk3568-evb: add hardware id detection
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ls1046ardb: enable IFC NAND.
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zynqmp: use std_file_update as update handler
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] firmware: zynqmp-fpga: fix fpga loading with optimized string functions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] file_list: add file_list_parse_null()
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/6] protonic: fix and maintaining
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! asm-generic: include bitio.h from io.h
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] hush: fix conditional statements exit code
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 3/8] console: support set baudrate for fixed baudrate drivers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4 2/8] serial: add litex UART driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! spi: add litex spiflash driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] fixup! asm-generic: include bitio.h from io.h
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 3/3] firmware: zynqmp-fpga: do not use DMA coherent memory for bitstream
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] firmware: zynqmp-fpga: initialize flags at function start
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] firmware: zynqmp-fpga: avoid additional buffer for size argument
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] firmware: zynqmp-fpga: do not use DMA coherent memory for bitstream
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] firmware: zynqmp-fpga: fix fpga loading with optimized string functions
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] firmware: zynqmp-fpga: do not use DMA coherent memory for bitstream
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] firmware: zynqmp-fpga: avoid additional buffer for size argument
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 0/3] firmware: zynqmp-fpga: fix fpga loading with optimized string functions
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 3/3] firmware: zynqmp-fpga: do not use DMA coherent memory for bitstream
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 1/3] firmware: zynqmp-fpga: initialize flags at function start
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH] ARM: zynqmp: use std_file_update as update handler
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v1 2/6] ARM: boards: protonic-imx6: Don't fixup MAC address for disabled device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/6] ARM: dts: imx6dl-prtvt7: Add brand state variable
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 6/6] ARM: boards: protonic-imx6: Enable bootchooser on prti6g board
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 5/6] ARM: boards: protonic-imx6: Add emmc_usdhc machine data variable
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/6] ARM: boards: protonic-imx6: Run usb boot entry instead of bare device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 4/6] ARM: boards: protonic-imx6: Don't register SD with bbu
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 0/6] protonic: fix and maintaining
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX6: boot: detect USB serial downloader more reliable
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc-pbl: Fix two typos in a comment
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fastboot net: add setter for global.fastboot.net.autostart
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 3/8] console: support set baudrate for fixed baudrate drivers
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 6/8] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 5/8] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 2/8] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 8/8] RISC-V: add litex_linux_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 0/8] RISC-V: add LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH RESEND v4 4/8] gpio: add driver for 74xx-ICs with MMIO access
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 0/8 v4] RISC-V: add LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 5/8] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 8/8] RISC-V: add litex_linux_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 6/8] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/8 v4] RISC-V: add LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/8] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/8] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/8] console: support set baudrate for fixed baudrate drivers
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/8] gpio: add driver for 74xx-ICs with MMIO access
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Support usb booting on i.MX8MP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] imx-usb-loader: Add support for i.MX8MP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] imx-usb-loader: Drop nearly unused struct usb_id
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] Support usb booting on i.MX8MP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] mci: imx-esdhc-pbl: Fix two typos in a comment
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] fastboot net: add setter for global.fastboot.net.autostart
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fastboot net: add setter for global.fastboot.net.autostart
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] nand: add NXP IFC nand driver
  • From: Renaud Barbier <renaud.barbier@xxxxxxxxx>
• [PATCH 1/3] ARM: atomic.h: add 64-bit counter support
  • From: Renaud Barbier <renaud.barbier@xxxxxxxxx>
• [PATCH 3/3] ls1046ardb: enable IFC NAND.
  • From: Renaud Barbier <renaud.barbier@xxxxxxxxx>
• [PATCH v3 0/3] NXP IFC nand driver
  • From: Renaud Barbier <renaud.barbier@xxxxxxxxx>
• Re: [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] net: e1000: split EEPROM and barebox MTD wrapper into separate files
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] x86: define phys_to_virt and virt_to_phys
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] asm-generic: include bitio.h from io.h
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] net: make ARC MAC driver 32-bit only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fastboot net: add global.fastboot.net.autostart early
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX6: boot: detect USB serial downloader more reliable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX6: boot: detect USB serial downloader more reliable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] fastboot net: add global.fastboot.net.autostart early
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX6: boot: detect USB serial downloader more reliable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fastboot net: add global.fastboot.net.autostart early
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX6: boot: detect USB serial downloader more reliable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] fastboot net: add global.fastboot.net.autostart early
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [PATCH 3/3] ls1046ardb: enable IFC NAND.
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• RE: [PATCH 2/3] nand: add NXP IFC nand driver
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• [PATCH] hush: fix conditional statements exit code
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• [PATCH v2 1/2] file_list: add file_list_parse_null()
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] fastboot: use file_list_parse_null()
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] nand: add NXP IFC nand driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: socfpga_import_preloader: make sdk optional
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: rockchip-rk3568-evb: add hardware id detection
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] fastboot: use file_list_parse_null()
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] ARM: at91: fix building samad2 images without sama5d3
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: mxs: Replace license and copyright boilerplate by SPDX identifiers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm/mvebu: sync barebox-arm-head.h to generic variant
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] ARM: mmu: use reserve mem entries to modify maps
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] of: reserve: add xn flag mem entries
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: imxwd: register explicit warm reset handler
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc-pbl: initialize fsl_esdhc_host
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] imx-usb-loader: Add support for i.MX8MP
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: bareboxenv: add erase hint if build as host-tool
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: atomic.h: add 64-bit counter support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Not successful if statements returning error code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ls1046ardb: enable IFC NAND.
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX8MM: add reboot to serial download mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] scripts: bareboxenv: add erase hint if build as host-tool
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm/mvebu: sync barebox-arm-head.h to generic variant
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX8MM: add reboot to serial download mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] imx-usb-loader: Add support for i.MX8MP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] imx-usb-loader: Drop nearly unused struct usb_id
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] arm/mvebu: sync barebox-arm-head.h to generic variant
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] arm: mxs: Replace license and copyright boilerplate by SPDX identifiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] ARM: mmu-early: map no-map entries XN & uncached
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/8] pbl: fdt: add support to parse reserved mem
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] of: add reserved_mem_read initcall
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/8] of: add flag to not create resmem DT entries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] ARM: mmu: use reserve mem entries to modify maps
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/8] of: add of_get_reserve_map stub for !CONFIG_OFTREE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] of: reserve: add xn flag mem entries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] PBL: enable LIBFDT for OP-TEE early loading
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc-pbl: initialize fsl_esdhc_host
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: imx-esdhc-pbl: initialize fsl_esdhc_host
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX8MM: add reboot to serial download mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: imxwd: register explicit warm reset handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 8/8] PBL: enable LIBFDT for OP-TEE early loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>