From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> To increase stability during boot in cold conditions (< -30 °C) increase the SOC voltage from 1.15 V to 1.25 V in DCD. The ARM voltage is left unchanged at its default 1.15 V. Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx> --- Changes in v2: - no changes --- arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h index 9a8f5f18e..8e0ab6f58 100644 --- a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h +++ b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h @@ -3,6 +3,8 @@ loadaddr 0x80000000 soc imx6 ivtofs 0x400 +wm 32 0x020c8140 0x00580012 + wm 32 0x020c4068 0xffffffff wm 32 0x020c406c 0xffffffff wm 32 0x020c4070 0xffffffff -- 2.25.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
