We can use the device directly and don't have to use the device that is attached to the I2C client. This reduces the dependency on i2c. Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> --- Changelog: v2: none --- drivers/video/ssd1307fb.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c index 61d0e083a3f7..88c88e3253cf 100644 --- a/drivers/video/ssd1307fb.c +++ b/drivers/video/ssd1307fb.c @@ -401,7 +401,7 @@ static int ssd1307fb_probe(struct device_d *dev) int i, j; if (!node) { - dev_err(&client->dev, "No device tree data found!\n"); + dev_err(dev, "No device tree data found!\n"); return -EINVAL; } @@ -421,22 +421,22 @@ static int ssd1307fb_probe(struct device_d *dev) goto fb_alloc_error; } - par->vbat = regulator_get(&client->dev, "vbat"); + par->vbat = regulator_get(dev, "vbat"); if (IS_ERR(par->vbat)) { - dev_info(&client->dev, "Will not use VBAT"); + dev_info(dev, "Will not use VBAT"); par->vbat = NULL; } ret = of_property_read_u32(node, "solomon,width", &par->width); if (ret) { - dev_err(&client->dev, + dev_err(dev, "Couldn't find 'solomon,width' in device tree.\n"); goto panel_init_error; } ret = of_property_read_u32(node, "solomon,height", &par->height); if (ret) { - dev_err(&client->dev, + dev_err(dev, "Couldn't find 'solomon,height' in device tree.\n"); goto panel_init_error; } @@ -444,7 +444,7 @@ static int ssd1307fb_probe(struct device_d *dev) ret = of_property_read_u32(node, "solomon,page-offset", &par->page_offset); if (ret) { - dev_err(&client->dev, + dev_err(dev, "Couldn't find 'solomon,page_offset' in device tree.\n"); goto panel_init_error; } @@ -477,7 +477,7 @@ static int ssd1307fb_probe(struct device_d *dev) vmem = malloc(vmem_size); if (!vmem) { - dev_err(&client->dev, "Couldn't allocate graphical memory.\n"); + dev_err(dev, "Couldn't allocate graphical memory.\n"); ret = -ENOMEM; goto fb_alloc_error; } @@ -508,7 +508,7 @@ static int ssd1307fb_probe(struct device_d *dev) ret = gpio_request_one(par->reset, flags, "oled-reset"); if (ret) { - dev_err(&client->dev, + dev_err(dev, "failed to request gpio %d: %d\n", par->reset, ret); goto reset_oled_error; @@ -546,7 +546,7 @@ static int ssd1307fb_probe(struct device_d *dev) info->dev.parent = dev; ret = register_framebuffer(info); if (ret) { - dev_err(&client->dev, "Couldn't register the framebuffer\n"); + dev_err(dev, "Couldn't register the framebuffer\n"); goto panel_init_error; } @@ -568,7 +568,7 @@ static int ssd1307fb_probe(struct device_d *dev) ssd1307fb_write_array(par, array, par->width * par->height / 8); kfree(array); - dev_info(&client->dev, + dev_info(dev, "ssd1307 framebuffer device registered, using %d bytes of video memory\n", vmem_size); -- 2.30.2 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox