Re: [PATCH 2/2] ARM: omap: Add bootsource serial to xload

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jan,

On Wed, Nov 12, 2014 at 08:41:54AM +0100, Jan Weitzel wrote:
> If booted from serial via xmodem, also get barebox.bin per xmodem
> For first stage you need the .pblx file instead of MLO.
> 
> Signed-off-by: Jan Weitzel <j.weitzel@xxxxxxxxx>
> ---
>  arch/arm/mach-omap/Kconfig |  7 +++++++
>  arch/arm/mach-omap/xload.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 53 insertions(+)
> 
> diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
> index f9b5ec3..953dd8f 100644
> --- a/arch/arm/mach-omap/Kconfig
> +++ b/arch/arm/mach-omap/Kconfig
> @@ -118,6 +118,13 @@ config OMAP4_USBBOOT
>  	  You need the utility program omap4_usbboot to boot from USB.
>  	  Please read omap4_usb_booting.txt for more information.
>  
> +config OMAP_SERIALBOOT
> +	bool
> +	default y

No default y please. Better keep it disabled by default because the
OMAP4 xload configs are quiet tight I think.

Sascha


> +	select XYMODEM
> +	select FS_RAMFS
> +	depends on ARCH_AM33XX && SHELL_NONE
> +
>  config OMAP_MULTI_BOARDS
>  	bool "Allow multiple boards to be selected"
>  	select HAVE_DEFAULT_ENVIRONMENT_NEW
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index e9d7bbb..8d9d84c 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -11,6 +11,7 @@
>  #include <sizes.h>
>  #include <malloc.h>
>  #include <filetype.h>
> +#include <xymodem.h>
>  #include <mach/generic.h>
>  
>  struct omap_barebox_part *barebox_part;
> @@ -184,6 +185,45 @@ static void *omap4_xload_boot_usb(void){
>  	return buf;
>  }
>  
> +static void *omap_serial_boot(void){
> +	struct console_device *cdev;
> +	int ret;
> +	void *buf;
> +	int len;
> +	int fd;
> +
> +	/* need temporary place to store file */
> +	ret = mount("none", "ramfs", "/", NULL);
> +	if (ret < 0) {
> +		printf("failed to mount ramfs\n");
> +		return NULL;
> +	}
> +
> +	cdev = console_get_first_active();
> +	if (!cdev) {
> +		printf("failed to get console\n");
> +		return NULL;
> +	}
> +
> +	fd = open("/barebox.bin", O_WRONLY | O_CREAT);
> +	if (fd < 0) {
> +		printf("could not create barebox.bin\n");
> +		return NULL;
> +	}
> +
> +	ret = do_load_serial_xmodem(cdev, fd);
> +	if (ret < 0) {
> +		printf("loadx failed\n");
> +		return NULL;
> +	}
> +
> +	buf = read_file("/barebox.bin", &len);
> +	if (!buf)
> +		printf("could not read barebox.bin from serial\n");
> +
> +	return buf;
> +}
> +
>  /*
>   * Replaces the default shell in xload configuration
>   */
> @@ -218,6 +258,12 @@ static __noreturn int omap_xload(void)
>  		func = omap_xload_boot_spi(barebox_part->nor_offset,
>  					barebox_part->nor_size);
>  		break;
> +	case BOOTSOURCE_SERIAL:
> +		if (IS_ENABLED(CONFIG_OMAP_SERIALBOOT)) {
> +			printf("booting from serial\n");
> +			func = omap_serial_boot();
> +			break;
> +		}
>  	default:
>  		printf("unknown boot source. Fall back to nand\n");
>  		func = omap_xload_boot_nand(barebox_part->nand_offset,
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux