We have a november release. Some new boards are supported, like
the Atmel sama5d4ek, Gateworks Ventana and Karo TX6. The mvebu
SoCs are now multisoc which means they need only a single config
now. barebox now has a MUSB driver and thus USB support on AM335x
dmesg support allows to build a binary which is very quiet but
still allows to get useful debugging messages.
See the following list for all patches that went into this release.
Cheers
Sascha
----------------------------------------------------------------
Antony Pavlov (19):
openrisc: generic board: reserve 512K for barebox
net: ethoc: add device tree support
openrisc: add initial device tree support
openrisc: dts: import or1ksim.dts from linux-3.16
openrisc: generic board: reduce platform code
openrisc: generic_defconfig: enable device tree stuff
Documentation: add OpenRISC or1ksim emulator section
common.h: use special IOMEM() for MIPS
MIPS: dts: use physical addresses (as Linux does)
MIPS: xburst: add JZ4780 SoC support
MIPS: add (another) Ingenic vendor ID
MIPS: xburst: debug_ll: rework common code, add JZ4780 support
MIPS: dts: add jz4780.dtsi
MIPS: add MIPS Creator CI20 board support
MIPS: add img-ci20_defconfig
Documentation: add MIPS Creator CI20 board mini-howto
checkpatch.pl: check for the FSF mailing address
MIPS: xburst: Kconfig: add comment
MIPS: ritmix-rzx50_defconfig: update DEBUG_LL; enable IMD
Bo Shen (10):
ARM: at91: move pmc base address into soc header
ARM: atmel: sama5d3 is a family member of sama5
ARM: at91: clock: use cpu_has_pcr for pcr1 checking
nand: atmel: runtime to generate galois table
mci: atmel: add new ip version 0x600 support
net: macb: enable GEM with only FE feature
ARM: at91: add sama5d4 soc support #1
ARM: at91: add sama5d4 soc support #2
ARM: at91: add sama5d4ek board support
I2C: at91: fix the method for interrupt
Brian Norris (1):
UBI: fastmap: do not miss bit-flips
Christian Hemp (12):
dts:imx6:pfla02: Add nand partitions
dts:imx6q:pcaaxl3: Add oftree partition to nand
ARM:imx6:phycard: Switch env to defaultenv_append_directory
ARM:imx6:phyflex: Add defaultenv
ARM:imx6:pfla02: Remove redundant code
dts:imx6:pfla02: Remove memory node
dts:imx6:pfla02: move mac read to module
dts:imx6:pfla02:Move spi partitions imx6qdl-phytec-pfla02
dts:imx6:pfla02: Add env node for SPI-NOR and NAND
ARM:phyFLEX-iMX6: Add bootsource detection
ARM:phyFLEX-iMX6: Remove eth phy reset form board
ARM:phyFLEX-iMX6: Remove mmd_write_reg from board
Dan Carpenter (1):
UBI: fix some use after free bugs
Dmitry Voytik (1):
usb: ehci-hcd: Correct CLEAR_FEATURE code
Eric Bénard (3):
eukrea-cpuimx35: refresh configuration
imx-image: handle i.MX35 special case
imx35-regs: add UART2 to CCM defines
Ezequiel Garcia (1):
nand: orion: Limit to Kirkwood platform
Franck Jullien (1):
Subject: [PATCH] cfi: print size in human readable format
Heiko Schocher (1):
UBI: fix the volumes tree sorting criteria
Jan Weitzel (1):
phy/micrel: disable Asym_Pause support
Juergen Beisert (2):
Add a Firmware programming framework
Firmware: provide a handler to program Altera FPGAs
Juergen Borleis (1):
arch/MPC5xxx: fix linker script for MPC5200
Julia Lawall (1):
UBI: fix error return code
Lucas Stach (10):
Makefile: enable Werror=implicit-function-declaration
phy: marvell: move IDs to own header
arm: imx6: add Gateworks Ventana board
net: asix: handle packets crossing URB boundaries
imx: ipu-v3: fix typo leading to build warning
dfu: fix possible usage of uninitialized var
arm: at91: remove unused variable
sha2: fix invalid length check
i2c: at91: fix invalid length check
clk: gate: remove superfluous code
Maik Otto (1):
ARM:phyFLEX-iMX6 New Ram Timings for Q/DL
Michael Olbrich (1):
EFI: report correct block device size
Mike Snitzer (1):
UBI: fix rb_tree node comparison in add_map
Qi Wang 王起 (qiwang) (1):
UBI: avoid program operation on NOR flash after erasure interrupted
Raphaël Poggi (5):
mach-at91: declare device tree clock
i2c: at91: fix coding style issue
i2c: at91: add at91sam9x5 config
i2c: at91: add support of device tree
of: fdt: fix typo in header
Richard Weinberger (2):
UBI: init_volumes: Ignore volumes with no LEBs
UBI: bugfix in ubi_wl_flush()
Robert Schwebel (1):
commands: select FILE_LIST for usbgadget
Rolf Evers-Fischer (2):
ARM: AM33xx: Enable USB and USB phy clocks
lib: parameter: fixed doku renamed ip -> ipaddr
Rostislav Lisovy (1):
ARM: dts: i.MX53: voipac: Provide NAND flash partition table
Sascha Hauer (73):
DT: Add binding for Altera FPGAs in passive-serial mode
Firmware: socfpga: Add SoCFPGA FPGA program support
ata: platform_ide: cleanup resource requesting
input: imx_keypad: remove unused variable
ARM: remove nonexisting env directories from defconfigs
Add some .gitignore files
pinctrl: fix Kconfig dependencies
dts: update to v3.17-rc5
resource: Let dev_get_resource_by_name return an error pointer
resource: Let dev_get_mem_region_by_name return an error pointer
resource: Let __request_region return an error pointer
resource: Let request_iomem_region return an error pointer
resource: Let dev_get_resource return an error pointer
resource: Let dev_get_mem_region return an error pointer
resource: Let dev_request_mem_region_by_name return an error pointer
resource: Let dev_request_mem_region return an error pointer
resource: Let request_ioport_region return an error pointer
net: phy: introduce phy_aneg_done
net: phy: Use xzalloc for small allocations
net: phy: don't use 'dev' as name for variables of type struct phy_device
imx-usb-loader: Skip unknown tags
imx-image: Handle check commands correctly
ARM: mvebu: Add common reset_cpu function
ARM: mvebu: Simplify memory init order
ARM: mvebu: Check for correct SoC in of_fixup callback
ARM: mvebu: Allow multiple SoCs
USB: add usb phy header file
scripts: mk-am3xxx-spi-image: fix wrong assumptions about SPI images
ARM: AM33xx SPI MLO update handler: detect non CH images
ARM: AM33xx: Add AFI GF board support
USB: gadget: put poller into core
USB: gadget: allow multiple udc drivers
USB: Add MUSB driver from Linux
USB: MUSB: Add barebox specific changes
ARM: dts: Update am335x-bone-common.dtsi
Documentation: USB: Add description for OTG device
ARM: am335x_defconfig: Enable USB support
clock: Add a variable with the first timestamp after startup
clock: make get_time_ns() safe to be called without clocksource
startup: Don't print multiple lines with pr_info
ARM: am33xx update SPI NOR: Check image size before flashing
ARM: am33xx update SPI NOR: Ask use before flashing
ARM: am335x: Add a NAND update handler for the regular barebox
ARM: am335x Phytec phyCORE: register SPI NOR and NAND update handlers
ARM: am335x: NAND MLO update: always let the user confirm updating
Documentation: Add some TI AM335x specific documentation
Introduce message logging support
ARM: Add mvebu_defconfig
ARM: defconfig: remove board specific mvebu defconfigs
Merge branch 'for-next/am33xx'
Merge branch 'for-next/arm'
Merge branch 'for-next/at91'
Merge branch 'for-next/dmesg'
Merge branch 'for-next/dts'
Merge branch 'for-next/firmware'
Merge branch 'for-next/imx'
Merge branch 'for-next/marvell'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd'
Merge branch 'for-next/musb'
Merge branch 'for-next/net-phy'
Merge branch 'for-next/of'
Merge branch 'for-next/omap'
Merge branch 'for-next/openrisc'
Merge branch 'for-next/phycore-imx6'
Merge branch 'for-next/resource-err-ptr'
Merge branch 'for-next/ubi'
console: Fix CONSOLE_NONE support
input: Let input support depend on !CONSOLE_NONE
include/environment.h: Add missing include
saveenv: Fix saving to specified file
Release v2014.11.0
Sebastian Block (1):
mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
Sebastian Hesselbarth (1):
ARM: mvebu: Add machine compatible to mbus ranges
Steffen Trumtrar (4):
DT: Add binding for Altera SOCFPGA FPGA Manager
arm: mach-imx: add more ddr register defines
ARM: i.MX6: add support for Karo TX6X family
commands: firmwareload: add CMD_GROUP
Tanya Brokhman (2):
UBI: fix error path in __wl_get_peb
UBI: fix ubi free PEBs count calculation
Teresa Gámez (10):
ARM: phyCORE-AM335x: Updated SPI NOR dts entries
ARM: phyCORE-AM335x: Update RAM Timings
ARM: phyCORE-AM335x: Fixup RAM setting naming
ARM: phyCORE-AM335x: Add support for 2x512MB RAM
ARM: phyCORE-AM335x: Update partition table
of: base: Add for_each_node_by_name_from
of: base: Add of_find_node_by_phandle_from
of: base: Add of_parse_phandle_from
of: Added of_set_property_to_child_phandle
commands: add of_display_timings
Uwe Kleine-König (1):
mxs: iomux-imx28: Fix keeper/pullup/drive strength/voltage flags
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
