On Sat, Oct 04, 2014 at 07:40:06PM +0200, Lucas Stach wrote: > Ok, I got around to work a bit more on this. I now > actually finished the rtl8169 network driver, so > this series yields working PCI attached ethernet > on Tegra30 Beaver. > > For Jetson K1 some work is left to setup the PHYs, but > that shouldn't be far out. > > While working on this I stumbled upon a few more issues, > so I decided to just roll the fixes into this series > and resend. > > Lucas Stach (19): > MIPS: malta: fix pci IO resource assignment > pci: split out device init > pci: add resource enum > pci: properly populate prefetchable BARs > pci: setup bridges and traverse buses behind them > pci: defer device registration until after bridge setup > pci: prettyprint device names > pci: track parent<->child relationship > commands: lspci: go down into subordinate busses > clk: tegra: add PLLE setup functions > clk: tegra30: add PCIe clocks > i2c: tegra: move to fs initcall > ARM: tegra: beaver: enable PEX voltage rail > tegra: pmc: add powerdomain handling > of: import pci range parser from linux > pci: add Tegra host controller driver > ARM: tegra: advertise PCI support > net: add rtl8169 driver > ARM: tegra: enable network related options in defconfig Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
