This moves the variable assignments previously done in /env/config-board
to non volatile variables in /env/nv/. This makes the settings adjustable
by the user without editing a file.
Most of the changes are simple conversions which for many boards makes
/env/config-board unnecessary. Some boards had some logic to assign
global.boot.default based on the current bootsource. This has been
moved to /env/init/bootsource. An additional check is added to not
overwrite a nv.boot.default should it exist.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/archosg9/env/init/bootsource | 4 +++
arch/arm/boards/at91sam9m10ihd/env/config | 19 --------------
.../boards/at91sam9m10ihd/env/init/config-board | 8 ------
arch/arm/boards/at91sam9m10ihd/env/nv/boot.default | 1 +
arch/arm/boards/at91sam9m10ihd/env/nv/hostname | 1 +
.../at91sam9m10ihd/env/nv/linux.bootargs.base | 1 +
.../boards/avnet-zedboard/env/init/config-board | 6 -----
.../avnet-zedboard/env/init/nv/linux.bootargs.base | 1 +
arch/arm/boards/beagle/env/config-board | 6 -----
arch/arm/boards/beagle/env/nv/linux.bootargs.base | 1 +
arch/arm/boards/ccxmx51/env/config-board | 10 --------
arch/arm/boards/ccxmx51/env/nv/autoboot_timeout | 1 +
arch/arm/boards/ccxmx51/env/nv/boot.default | 1 +
arch/arm/boards/ccxmx51/env/nv/linux.bootargs.base | 1 +
arch/arm/boards/clep7212/env/config-board | 12 ---------
arch/arm/boards/clep7212/env/init/bootsource | 9 +++++++
arch/arm/boards/clep7212/env/nv/autoboot_timeout | 1 +
.../arm/boards/clep7212/env/nv/linux.bootargs.base | 1 +
.../boards/crystalfontz-cfa10036/env/config-board | 6 -----
.../boards/crystalfontz-cfa10036/env/init/general | 12 ---------
.../crystalfontz-cfa10036/env/nv/boot.default | 1 +
.../env/nv/linux.bootargs.base | 1 +
arch/arm/boards/efika-mx-smartbook/env/config | 29 ----------------------
.../boards/efika-mx-smartbook/env/init/bootsource | 4 +++
.../efika-mx-smartbook/env/nv/autoboot_timeout | 1 +
.../efika-mx-smartbook/env/nv/linux.bootargs.base | 1 +
.../efika-mx-smartbook/env/nv/linux.bootargs.lpj | 1 +
.../efika-mx-smartbook/env/nv/linux.bootargs.quiet | 1 +
.../boards/embedsky-e9/defaultenv-e9/config-board | 7 ------
.../embedsky-e9/defaultenv-e9/init/bootsource | 7 ++++++
.../boards/embedsky-e9/defaultenv-e9/nv/hostname | 1 +
arch/arm/boards/gk802/env/config-board | 6 -----
arch/arm/boards/guf-vincell/env/init/config-board | 7 ------
arch/arm/boards/guf-vincell/env/init/nv/hostname | 1 +
.../guf-vincell/env/init/nv/linux.bootargs.base | 1 +
arch/arm/boards/highbank/env/config-board | 10 --------
arch/arm/boards/highbank/env/nv/boot.default | 1 +
arch/arm/boards/highbank/env/nv/bootargs.base | 1 +
arch/arm/boards/highbank/env/nv/bootm.oftree | 1 +
arch/arm/boards/mx31moboard/env/config-board | 7 ------
arch/arm/boards/mx31moboard/env/nv/boot.default | 1 +
.../boards/mx31moboard/env/nv/linux.bootargs.base | 1 +
arch/arm/boards/panda/env/config-board | 6 -----
arch/arm/boards/panda/env/nv/linux.bootargs.base | 1 +
.../defaultenv-phycard-imx6/config-board | 9 -------
.../defaultenv-phycard-imx6/nv/boot.default | 1 +
.../defaultenv-phycard-imx6/nv/bootargs.base | 1 +
.../defaultenv-phycard-imx6/nv/hostname | 1 +
.../defaultenv-phycore-am335x/config-board | 17 -------------
.../defaultenv-phycore-am335x/init/bootsource | 15 +++++++++++
.../defaultenv-phycore-am335x/init/init-usbserial | 4 +++
.../defaultenv-phycore-am335x/nv/bootargs.base | 1 +
.../defaultenv-phycore-am335x/nv/hostname | 1 +
.../boards/phytec-phycore-imx31/env/config-board | 6 -----
.../env/nv/linux.bootargs.base | 1 +
.../boards/phytec-phycore-imx35/env/config-board | 6 -----
.../env/nv/linux.bootargs.base | 1 +
.../defaultenv-phyflex-am335x/config-board | 17 -------------
.../defaultenv-phyflex-am335x/init/bootsource | 15 +++++++++++
.../defaultenv-phyflex-am335x/nv/hostname | 1 +
.../nv/linux.bootargs.base | 1 +
.../defaultenv-phyflex-imx6/config-board | 9 -------
.../defaultenv-phyflex-imx6/nv/boot.default | 1 +
.../defaultenv-phyflex-imx6/nv/hostname | 1 +
.../defaultenv-phyflex-imx6/nv/linux.bootargs.base | 1 +
arch/arm/boards/radxa-rock/env/config-board | 6 -----
.../boards/radxa-rock/env/nv/linux.bootargs.base | 1 +
arch/arm/boards/telit-evk-pro3/env/config-board | 8 ------
arch/arm/boards/telit-evk-pro3/env/nv/boot.default | 1 +
.../arm/boards/telit-evk-pro3/env/nv/bootargs.base | 1 +
arch/arm/boards/telit-evk-pro3/env/nv/hostname | 1 +
common/Kconfig | 1 +
defaultenv/defaultenv-2-base/bin/init | 3 +++
defaultenv/defaultenv-2-base/config | 22 ++--------------
defaultenv/defaultenv-2-base/nv/allow_color | 1 +
defaultenv/defaultenv-2-base/nv/autoboot_timeout | 1 +
defaultenv/defaultenv-2-base/nv/user | 1 +
77 files changed, 108 insertions(+), 249 deletions(-)
delete mode 100644 arch/arm/boards/at91sam9m10ihd/env/config
delete mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/config-board
create mode 100644 arch/arm/boards/at91sam9m10ihd/env/nv/boot.default
create mode 100644 arch/arm/boards/at91sam9m10ihd/env/nv/hostname
create mode 100644 arch/arm/boards/at91sam9m10ihd/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/beagle/env/config-board
create mode 100644 arch/arm/boards/beagle/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/ccxmx51/env/config-board
create mode 100644 arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
create mode 100644 arch/arm/boards/ccxmx51/env/nv/boot.default
create mode 100644 arch/arm/boards/ccxmx51/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/clep7212/env/config-board
create mode 100644 arch/arm/boards/clep7212/env/init/bootsource
create mode 100644 arch/arm/boards/clep7212/env/nv/autoboot_timeout
create mode 100644 arch/arm/boards/clep7212/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/config-board
delete mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/general
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/nv/boot.default
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/efika-mx-smartbook/env/config
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/nv/autoboot_timeout
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.base
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.lpj
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.quiet
delete mode 100644 arch/arm/boards/embedsky-e9/defaultenv-e9/config-board
create mode 100644 arch/arm/boards/embedsky-e9/defaultenv-e9/init/bootsource
create mode 100644 arch/arm/boards/embedsky-e9/defaultenv-e9/nv/hostname
delete mode 100644 arch/arm/boards/gk802/env/config-board
delete mode 100644 arch/arm/boards/guf-vincell/env/init/config-board
create mode 100644 arch/arm/boards/guf-vincell/env/init/nv/hostname
create mode 100644 arch/arm/boards/guf-vincell/env/init/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/highbank/env/config-board
create mode 100644 arch/arm/boards/highbank/env/nv/boot.default
create mode 100644 arch/arm/boards/highbank/env/nv/bootargs.base
create mode 100644 arch/arm/boards/highbank/env/nv/bootm.oftree
delete mode 100644 arch/arm/boards/mx31moboard/env/config-board
create mode 100644 arch/arm/boards/mx31moboard/env/nv/boot.default
create mode 100644 arch/arm/boards/mx31moboard/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/panda/env/config-board
create mode 100644 arch/arm/boards/panda/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/config-board
create mode 100644 arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/boot.default
create mode 100644 arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/bootargs.base
create mode 100644 arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/hostname
delete mode 100644 arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/config-board
create mode 100644 arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/bootsource
create mode 100644 arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/init-usbserial
create mode 100644 arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/bootargs.base
create mode 100644 arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/hostname
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/config-board
create mode 100644 arch/arm/boards/phytec-phycore-imx31/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/config-board
create mode 100644 arch/arm/boards/phytec-phycore-imx35/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/config-board
create mode 100644 arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/init/bootsource
create mode 100644 arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/hostname
create mode 100644 arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/config-board
create mode 100644 arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/boot.default
create mode 100644 arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/hostname
create mode 100644 arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/radxa-rock/env/config-board
create mode 100644 arch/arm/boards/radxa-rock/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/telit-evk-pro3/env/config-board
create mode 100644 arch/arm/boards/telit-evk-pro3/env/nv/boot.default
create mode 100644 arch/arm/boards/telit-evk-pro3/env/nv/bootargs.base
create mode 100644 arch/arm/boards/telit-evk-pro3/env/nv/hostname
create mode 100644 defaultenv/defaultenv-2-base/nv/allow_color
create mode 100644 defaultenv/defaultenv-2-base/nv/autoboot_timeout
create mode 100644 defaultenv/defaultenv-2-base/nv/user
diff --git a/arch/arm/boards/archosg9/env/init/bootsource b/arch/arm/boards/archosg9/env/init/bootsource
index b3df447..6145a76 100644
--- a/arch/arm/boards/archosg9/env/init/bootsource
+++ b/arch/arm/boards/archosg9/env/init/bootsource
@@ -1,5 +1,9 @@
#!/bin/sh
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
if [ -f /mnt/sd/zImage ]; then
global.boot.default=sd-card-linux
elif [ -f /mnt/sd/android ]; then
diff --git a/arch/arm/boards/at91sam9m10ihd/env/config b/arch/arm/boards/at91sam9m10ihd/env/config
deleted file mode 100644
index db2713c..0000000
--- a/arch/arm/boards/at91sam9m10ihd/env/config
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-# change network settings in /env/network/eth0
-# change mtd partition settings and automountpoints in /env/init/*
-
-# set to false if you do not want to have colors
-global.allow_color=true
-
-# user (used for network filenames)
-global.user=none
-
-# timeout in seconds before the default boot entry is started
-global.autoboot_timeout=3
-
-# default boot entry (one of /env/boot/*)
-global.boot.default=android
-
-# base bootargs
-#global.linux.bootargs.base="console=ttyS0,115200"
diff --git a/arch/arm/boards/at91sam9m10ihd/env/init/config-board b/arch/arm/boards/at91sam9m10ihd/env/init/config-board
deleted file mode 100644
index 32c1071..0000000
--- a/arch/arm/boards/at91sam9m10ihd/env/init/config-board
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=at91sam9m10ihd
-global.linux.bootargs.base="console=ttyS0,115200"
-global.boot.default=android
diff --git a/arch/arm/boards/at91sam9m10ihd/env/nv/boot.default b/arch/arm/boards/at91sam9m10ihd/env/nv/boot.default
new file mode 100644
index 0000000..7473a25
--- /dev/null
+++ b/arch/arm/boards/at91sam9m10ihd/env/nv/boot.default
@@ -0,0 +1 @@
+android
diff --git a/arch/arm/boards/at91sam9m10ihd/env/nv/hostname b/arch/arm/boards/at91sam9m10ihd/env/nv/hostname
new file mode 100644
index 0000000..9361c5a
--- /dev/null
+++ b/arch/arm/boards/at91sam9m10ihd/env/nv/hostname
@@ -0,0 +1 @@
+at91sam9m10ihd
diff --git a/arch/arm/boards/at91sam9m10ihd/env/nv/linux.bootargs.base b/arch/arm/boards/at91sam9m10ihd/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..476b1fb
--- /dev/null
+++ b/arch/arm/boards/at91sam9m10ihd/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyS0,115200
diff --git a/arch/arm/boards/avnet-zedboard/env/init/config-board b/arch/arm/boards/avnet-zedboard/env/init/config-board
deleted file mode 100644
index f3032a4..0000000
--- a/arch/arm/boards/avnet-zedboard/env/init/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttyPS1,115200"
diff --git a/arch/arm/boards/avnet-zedboard/env/init/nv/linux.bootargs.base b/arch/arm/boards/avnet-zedboard/env/init/nv/linux.bootargs.base
new file mode 100644
index 0000000..6c9f9da
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/env/init/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyPS1,115200
diff --git a/arch/arm/boards/beagle/env/config-board b/arch/arm/boards/beagle/env/config-board
deleted file mode 100644
index dcabf4c..0000000
--- a/arch/arm/boards/beagle/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttyO2,115200"
diff --git a/arch/arm/boards/beagle/env/nv/linux.bootargs.base b/arch/arm/boards/beagle/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..5fef726
--- /dev/null
+++ b/arch/arm/boards/beagle/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyO2,115200
diff --git a/arch/arm/boards/ccxmx51/env/config-board b/arch/arm/boards/ccxmx51/env/config-board
deleted file mode 100644
index 1405344..0000000
--- a/arch/arm/boards/ccxmx51/env/config-board
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# Timeout in seconds before the default boot entry is started
-global.autoboot_timeout=2
-
-# Default boot entry (one of /env/boot/*)
-global.boot.default=nand
-
-# Board bootargs
-global.linux.bootargs.base="earlyprintk console=ttymxc0,115200n8"
diff --git a/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout b/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
new file mode 100644
index 0000000..0cfbf08
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
@@ -0,0 +1 @@
+2
diff --git a/arch/arm/boards/ccxmx51/env/nv/boot.default b/arch/arm/boards/ccxmx51/env/nv/boot.default
new file mode 100644
index 0000000..026a25c
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/nv/boot.default
@@ -0,0 +1 @@
+nand
diff --git a/arch/arm/boards/ccxmx51/env/nv/linux.bootargs.base b/arch/arm/boards/ccxmx51/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..d83eb94
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+earlyprintk console=ttymxc0,115200n8
diff --git a/arch/arm/boards/clep7212/env/config-board b/arch/arm/boards/clep7212/env/config-board
deleted file mode 100644
index f7a8f60..0000000
--- a/arch/arm/boards/clep7212/env/config-board
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# Timeout in seconds before the default boot entry is started
-global.autoboot_timeout=2
-
-# Default boot entry (one of /env/boot/*)
-if [ -e /dev/nor0 ]; then
- global.boot.default=nor
-fi
-
-# Board bootargs
-global.linux.bootargs.base="earlyprintk console=ttyCL0,57600n8"
diff --git a/arch/arm/boards/clep7212/env/init/bootsource b/arch/arm/boards/clep7212/env/init/bootsource
new file mode 100644
index 0000000..2f09c0c
--- /dev/null
+++ b/arch/arm/boards/clep7212/env/init/bootsource
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+if [ -e /dev/nor0 ]; then
+ global.boot.default=nor
+fi
diff --git a/arch/arm/boards/clep7212/env/nv/autoboot_timeout b/arch/arm/boards/clep7212/env/nv/autoboot_timeout
new file mode 100644
index 0000000..0cfbf08
--- /dev/null
+++ b/arch/arm/boards/clep7212/env/nv/autoboot_timeout
@@ -0,0 +1 @@
+2
diff --git a/arch/arm/boards/clep7212/env/nv/linux.bootargs.base b/arch/arm/boards/clep7212/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..77ea2ec
--- /dev/null
+++ b/arch/arm/boards/clep7212/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+earlyprintk console=ttyCL0,57600n8
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/config-board b/arch/arm/boards/crystalfontz-cfa10036/env/config-board
deleted file mode 100644
index fff4caa..0000000
--- a/arch/arm/boards/crystalfontz-cfa10036/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttyAMA0,115200"
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/general b/arch/arm/boards/crystalfontz-cfa10036/env/init/general
deleted file mode 100644
index 5cb3a75..0000000
--- a/arch/arm/boards/crystalfontz-cfa10036/env/init/general
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-if [ "$1" = menu ]; then
- init-menu-add-entry "$0" "general config settings"
- exit
-fi
-
-# timeout in seconds before the default boot entry is started
-global.autoboot_timeout=3
-
-# default boot entry (one of /env/boot/*)
-global.boot.default=mmc-ext3
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/nv/boot.default b/arch/arm/boards/crystalfontz-cfa10036/env/nv/boot.default
new file mode 100644
index 0000000..1bbb823
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/nv/boot.default
@@ -0,0 +1 @@
+mmc-ext3
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/nv/linux.bootargs.base b/arch/arm/boards/crystalfontz-cfa10036/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..5b56caf
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyAMA0,115200
diff --git a/arch/arm/boards/efika-mx-smartbook/env/config b/arch/arm/boards/efika-mx-smartbook/env/config
deleted file mode 100644
index c63c6a1..0000000
--- a/arch/arm/boards/efika-mx-smartbook/env/config
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# change network settings in /env/network/eth0
-# change mtd partition settings and automountpoints in /env/init/*
-
-#global.hostname=
-
-# set to false if you do not want to have colors
-global.allow_color=true
-
-# user (used for network filenames)
-global.user=none
-
-# timeout in seconds before the default boot entry is started
-global.autoboot_timeout=1
-
-# default boot entry (one of /env/boot/*)
-# (if not overwritten here, the bootdevice barebox comes from
-# is used)
-#global.boot.default=net
-
-# base bootargs
-global.linux.bootargs.base="console=tty1"
-
-# suitable for 800MHz
-global linux.bootargs.lpj="lpj=3997696"
-
-# speed up booting by being more quiet
-global linux.bootargs.quiet="quiet"
diff --git a/arch/arm/boards/efika-mx-smartbook/env/init/bootsource b/arch/arm/boards/efika-mx-smartbook/env/init/bootsource
index 380e855..eb98a3c 100644
--- a/arch/arm/boards/efika-mx-smartbook/env/init/bootsource
+++ b/arch/arm/boards/efika-mx-smartbook/env/init/bootsource
@@ -1,5 +1,9 @@
#!/bin/sh
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
# by default pick kernel from MMC card if booting from
# it, otherwise default to boot from internal harddisk
diff --git a/arch/arm/boards/efika-mx-smartbook/env/nv/autoboot_timeout b/arch/arm/boards/efika-mx-smartbook/env/nv/autoboot_timeout
new file mode 100644
index 0000000..d00491f
--- /dev/null
+++ b/arch/arm/boards/efika-mx-smartbook/env/nv/autoboot_timeout
@@ -0,0 +1 @@
+1
diff --git a/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.base b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..04415e6
--- /dev/null
+++ b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=tty1
diff --git a/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.lpj b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.lpj
new file mode 100644
index 0000000..e5c753e
--- /dev/null
+++ b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.lpj
@@ -0,0 +1 @@
+lpj=3997696
diff --git a/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.quiet b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.quiet
new file mode 100644
index 0000000..2448b2c
--- /dev/null
+++ b/arch/arm/boards/efika-mx-smartbook/env/nv/linux.bootargs.quiet
@@ -0,0 +1 @@
+quiet
diff --git a/arch/arm/boards/embedsky-e9/defaultenv-e9/config-board b/arch/arm/boards/embedsky-e9/defaultenv-e9/config-board
deleted file mode 100644
index 6cba769..0000000
--- a/arch/arm/boards/embedsky-e9/defaultenv-e9/config-board
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=e9
-global.boot.default=$bootsource$bootsource_instance
diff --git a/arch/arm/boards/embedsky-e9/defaultenv-e9/init/bootsource b/arch/arm/boards/embedsky-e9/defaultenv-e9/init/bootsource
new file mode 100644
index 0000000..42a0c5c
--- /dev/null
+++ b/arch/arm/boards/embedsky-e9/defaultenv-e9/init/bootsource
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+global.boot.default=$bootsource$bootsource_instance
diff --git a/arch/arm/boards/embedsky-e9/defaultenv-e9/nv/hostname b/arch/arm/boards/embedsky-e9/defaultenv-e9/nv/hostname
new file mode 100644
index 0000000..0c1945a
--- /dev/null
+++ b/arch/arm/boards/embedsky-e9/defaultenv-e9/nv/hostname
@@ -0,0 +1 @@
+e9
diff --git a/arch/arm/boards/gk802/env/config-board b/arch/arm/boards/gk802/env/config-board
deleted file mode 100644
index e25a419..0000000
--- a/arch/arm/boards/gk802/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttymxc3,115200"
diff --git a/arch/arm/boards/guf-vincell/env/init/config-board b/arch/arm/boards/guf-vincell/env/init/config-board
deleted file mode 100644
index 77e9fc8..0000000
--- a/arch/arm/boards/guf-vincell/env/init/config-board
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=vincell
-global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/guf-vincell/env/init/nv/hostname b/arch/arm/boards/guf-vincell/env/init/nv/hostname
new file mode 100644
index 0000000..922106e
--- /dev/null
+++ b/arch/arm/boards/guf-vincell/env/init/nv/hostname
@@ -0,0 +1 @@
+vincell
diff --git a/arch/arm/boards/guf-vincell/env/init/nv/linux.bootargs.base b/arch/arm/boards/guf-vincell/env/init/nv/linux.bootargs.base
new file mode 100644
index 0000000..d775310
--- /dev/null
+++ b/arch/arm/boards/guf-vincell/env/init/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttymxc0,115200
diff --git a/arch/arm/boards/highbank/env/config-board b/arch/arm/boards/highbank/env/config-board
deleted file mode 100644
index da8fcf6..0000000
--- a/arch/arm/boards/highbank/env/config-board
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.allow_color=true
-global.autoboot_timeout=3
-global.bootm.oftree="/dev/dtb"
-global.linux.bootargs.base="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
-global.boot.default=/env/boot.d
diff --git a/arch/arm/boards/highbank/env/nv/boot.default b/arch/arm/boards/highbank/env/nv/boot.default
new file mode 100644
index 0000000..c47e1b2
--- /dev/null
+++ b/arch/arm/boards/highbank/env/nv/boot.default
@@ -0,0 +1 @@
+/env/boot.d
diff --git a/arch/arm/boards/highbank/env/nv/bootargs.base b/arch/arm/boards/highbank/env/nv/bootargs.base
new file mode 100644
index 0000000..826debe
--- /dev/null
+++ b/arch/arm/boards/highbank/env/nv/bootargs.base
@@ -0,0 +1 @@
+console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0
diff --git a/arch/arm/boards/highbank/env/nv/bootm.oftree b/arch/arm/boards/highbank/env/nv/bootm.oftree
new file mode 100644
index 0000000..c373173
--- /dev/null
+++ b/arch/arm/boards/highbank/env/nv/bootm.oftree
@@ -0,0 +1 @@
+/dev/dtb
diff --git a/arch/arm/boards/mx31moboard/env/config-board b/arch/arm/boards/mx31moboard/env/config-board
deleted file mode 100644
index f67b333..0000000
--- a/arch/arm/boards/mx31moboard/env/config-board
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.boot.default="usbmsd sd nor"
-global.linux.bootargs.base="console=ttymxc0,921600"
diff --git a/arch/arm/boards/mx31moboard/env/nv/boot.default b/arch/arm/boards/mx31moboard/env/nv/boot.default
new file mode 100644
index 0000000..7957ab3
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/nv/boot.default
@@ -0,0 +1 @@
+usbmsd sd nor
diff --git a/arch/arm/boards/mx31moboard/env/nv/linux.bootargs.base b/arch/arm/boards/mx31moboard/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..84e488d
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttymxc0,921600
diff --git a/arch/arm/boards/panda/env/config-board b/arch/arm/boards/panda/env/config-board
deleted file mode 100644
index dcabf4c..0000000
--- a/arch/arm/boards/panda/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttyO2,115200"
diff --git a/arch/arm/boards/panda/env/nv/linux.bootargs.base b/arch/arm/boards/panda/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..5fef726
--- /dev/null
+++ b/arch/arm/boards/panda/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyO2,115200
diff --git a/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/config-board b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/config-board
deleted file mode 100644
index 4d7b37c..0000000
--- a/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/config-board
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.boot.default=nand
-
-global.hostname=phyCARD-i.MX6
-global.linux.bootargs.base="console=ttymxc2,115200"
diff --git a/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/boot.default b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/boot.default
new file mode 100644
index 0000000..026a25c
--- /dev/null
+++ b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/boot.default
@@ -0,0 +1 @@
+nand
diff --git a/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/bootargs.base b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/bootargs.base
new file mode 100644
index 0000000..6b62c99
--- /dev/null
+++ b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/bootargs.base
@@ -0,0 +1 @@
+console=ttymxc2,115200
diff --git a/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/hostname b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/hostname
new file mode 100644
index 0000000..47b16cc
--- /dev/null
+++ b/arch/arm/boards/phytec-phycard-imx6/defaultenv-phycard-imx6/nv/hostname
@@ -0,0 +1 @@
+phyCARD-i.MX6
diff --git a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/config-board b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/config-board
deleted file mode 100644
index a492ed1..0000000
--- a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/config-board
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=pcm051
-global.linux.bootargs.base="console=ttyO0,115200"
-
-if [ $bootsource = mmc ]; then
- global.boot.default="mmc nand spi net"
-elif [ $boosource = nand ]; then
- global.boot.default="nand spi mmc net"
-elif [ $boosource = spi ]; then
- global.boot.default="spi nand mmc net"
-elif [ $boosource = net ]; then
- global.boot.default="net nand spi mmc"
-fi
diff --git a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/bootsource b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/bootsource
new file mode 100644
index 0000000..76d1f9b
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/bootsource
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+if [ $bootsource = mmc ]; then
+ global.boot.default="mmc nand spi net"
+elif [ $boosource = nand ]; then
+ global.boot.default="nand spi mmc net"
+elif [ $boosource = spi ]; then
+ global.boot.default="spi nand mmc net"
+elif [ $boosource = net ]; then
+ global.boot.default="net nand spi mmc"
+fi
diff --git a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/init-usbserial b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/init-usbserial
new file mode 100644
index 0000000..a154fd1
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/init/init-usbserial
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+#otg1.mode=peripheral
+usbgadget -a -A /dev/nand0.kernel.bb(kernel)
diff --git a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/bootargs.base b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/bootargs.base
new file mode 100644
index 0000000..d7b01a1
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/bootargs.base
@@ -0,0 +1 @@
+console=ttyO0,115200
diff --git a/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/hostname b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/hostname
new file mode 100644
index 0000000..988ab6d
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-am335x/defaultenv-phycore-am335x/nv/hostname
@@ -0,0 +1 @@
+pcm051
diff --git a/arch/arm/boards/phytec-phycore-imx31/env/config-board b/arch/arm/boards/phytec-phycore-imx31/env/config-board
deleted file mode 100644
index e8e8378..0000000
--- a/arch/arm/boards/phytec-phycore-imx31/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/phytec-phycore-imx31/env/nv/linux.bootargs.base b/arch/arm/boards/phytec-phycore-imx31/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..d775310
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-imx31/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttymxc0,115200
diff --git a/arch/arm/boards/phytec-phycore-imx35/env/config-board b/arch/arm/boards/phytec-phycore-imx35/env/config-board
deleted file mode 100644
index e8e8378..0000000
--- a/arch/arm/boards/phytec-phycore-imx35/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/phytec-phycore-imx35/env/nv/linux.bootargs.base b/arch/arm/boards/phytec-phycore-imx35/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..d775310
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-imx35/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttymxc0,115200
diff --git a/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/config-board b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/config-board
deleted file mode 100644
index b620ac1..0000000
--- a/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/config-board
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=pfla03
-global.linux.bootargs.base="console=ttyO0,115200"
-
-if [ $bootsource = mmc ]; then
- global.boot.default="mmc nand spi net"
-elif [ $boosource = nand ]; then
- global.boot.default="nand spi mmc net"
-elif [ $boosource = spi ]; then
- global.boot.default="spi nand mmc net"
-elif [ $boosource = net ]; then
- global.boot.default="net nand spi mmc"
-fi
diff --git a/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/init/bootsource b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/init/bootsource
new file mode 100644
index 0000000..76d1f9b
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/init/bootsource
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+if [ $bootsource = mmc ]; then
+ global.boot.default="mmc nand spi net"
+elif [ $boosource = nand ]; then
+ global.boot.default="nand spi mmc net"
+elif [ $boosource = spi ]; then
+ global.boot.default="spi nand mmc net"
+elif [ $boosource = net ]; then
+ global.boot.default="net nand spi mmc"
+fi
diff --git a/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/hostname b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/hostname
new file mode 100644
index 0000000..09c5821
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/hostname
@@ -0,0 +1 @@
+pfla03
diff --git a/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/linux.bootargs.base b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/linux.bootargs.base
new file mode 100644
index 0000000..d7b01a1
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-am335x/defaultenv-phyflex-am335x/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyO0,115200
diff --git a/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/config-board b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/config-board
deleted file mode 100644
index b40a4de..0000000
--- a/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/config-board
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.boot.default=nand
-
-global.hostname=phyFLEX-i.MX6
-global.linux.bootargs.base="console=ttymxc3,115200"
diff --git a/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/boot.default b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/boot.default
new file mode 100644
index 0000000..026a25c
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/boot.default
@@ -0,0 +1 @@
+nand
diff --git a/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/hostname b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/hostname
new file mode 100644
index 0000000..192f6b4
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/hostname
@@ -0,0 +1 @@
+phyFLEX-i.MX6
diff --git a/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/linux.bootargs.base b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/linux.bootargs.base
new file mode 100644
index 0000000..c61c603
--- /dev/null
+++ b/arch/arm/boards/phytec-phyflex-imx6/defaultenv-phyflex-imx6/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttymxc3,115200
diff --git a/arch/arm/boards/radxa-rock/env/config-board b/arch/arm/boards/radxa-rock/env/config-board
deleted file mode 100644
index d986e30..0000000
--- a/arch/arm/boards/radxa-rock/env/config-board
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.linux.bootargs.base="console=ttyS2,115200"
\ No newline at end of file
diff --git a/arch/arm/boards/radxa-rock/env/nv/linux.bootargs.base b/arch/arm/boards/radxa-rock/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..37a03fd
--- /dev/null
+++ b/arch/arm/boards/radxa-rock/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyS2,115200
diff --git a/arch/arm/boards/telit-evk-pro3/env/config-board b/arch/arm/boards/telit-evk-pro3/env/config-board
deleted file mode 100644
index 741b902..0000000
--- a/arch/arm/boards/telit-evk-pro3/env/config-board
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# board defaults, do not change in running system. Change /env/config
-# instead
-
-global.hostname=evk-pro3
-global.linux.bootargs.base="console=ttyS0,115200"
-global.boot.default=nand-ubi
diff --git a/arch/arm/boards/telit-evk-pro3/env/nv/boot.default b/arch/arm/boards/telit-evk-pro3/env/nv/boot.default
new file mode 100644
index 0000000..d9dfbbc
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/nv/boot.default
@@ -0,0 +1 @@
+nand-ubi
diff --git a/arch/arm/boards/telit-evk-pro3/env/nv/bootargs.base b/arch/arm/boards/telit-evk-pro3/env/nv/bootargs.base
new file mode 100644
index 0000000..476b1fb
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/nv/bootargs.base
@@ -0,0 +1 @@
+console=ttyS0,115200
diff --git a/arch/arm/boards/telit-evk-pro3/env/nv/hostname b/arch/arm/boards/telit-evk-pro3/env/nv/hostname
new file mode 100644
index 0000000..92941fa
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/nv/hostname
@@ -0,0 +1 @@
+evk-pro3
diff --git a/common/Kconfig b/common/Kconfig
index a2cce39..b11f8a5 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -631,6 +631,7 @@ config DEFAULT_ENVIRONMENT_GENERIC_NEW
select CMD_BASENAME
select CMD_READLINK
select CMD_DIRNAME
+ select CMD_NV
select FLEXIBLE_BOOTARGS
select CMD_BOOT
select NET_CMD_IFUP if NET
diff --git a/defaultenv/defaultenv-2-base/bin/init b/defaultenv/defaultenv-2-base/bin/init
index 3a0e93b..34807bc 100644
--- a/defaultenv/defaultenv-2-base/bin/init
+++ b/defaultenv/defaultenv-2-base/bin/init
@@ -16,9 +16,12 @@ global editcmd
[ -z "${global.hostname}" ] && global.hostname=generic
[ -z "${global.user}" ] && global.user=none
+magicvar -a global.user "username (used in network filenames)"
[ -z "${global.autoboot_timeout}" ] && global.autoboot_timeout=3
+magicvar -a global.autoboot_timeout "timeout in seconds before automatic booting"
[ -z "${global.boot.default}" ] && global.boot.default=net
[ -z "${global.allow_color}" ] && global.allow_color=true
+magicvar -a global.allow_color "Allow color on the console (boolean)"
[ -z "${global.editcmd}" ] && global.editcmd=sedit
[ -e /env/config-board ] && /env/config-board
diff --git a/defaultenv/defaultenv-2-base/config b/defaultenv/defaultenv-2-base/config
index 784ae52..49fa605 100644
--- a/defaultenv/defaultenv-2-base/config
+++ b/defaultenv/defaultenv-2-base/config
@@ -3,23 +3,5 @@
# change network settings in /env/network/eth0
# change mtd partition settings and automountpoints in /env/init/*
-#global.hostname=
-
-# set to false if you do not want to have colors
-#global.allow_color=true
-
-# user (used for network filenames)
-#global.user=none
-
-# timeout in seconds before the default boot entry is started
-#global.autoboot_timeout=3
-
-# list of boot entries. These are executed in order until one
-# succeeds. An entry can be:
-# - a filename in /env/boot/
-# - a full path to a directory. All files in this directory are
-# treated as boot files and executed in alphabetical order
-#global.boot.default=net
-
-# base bootargs
-#global.linux.bootargs.base="console=ttyS0,115200"
+# The settings that used to be here are in nv variables now.
+# See 'help nv', 'magicvar'
diff --git a/defaultenv/defaultenv-2-base/nv/allow_color b/defaultenv/defaultenv-2-base/nv/allow_color
new file mode 100644
index 0000000..f32a580
--- /dev/null
+++ b/defaultenv/defaultenv-2-base/nv/allow_color
@@ -0,0 +1 @@
+true
\ No newline at end of file
diff --git a/defaultenv/defaultenv-2-base/nv/autoboot_timeout b/defaultenv/defaultenv-2-base/nv/autoboot_timeout
new file mode 100644
index 0000000..e440e5c
--- /dev/null
+++ b/defaultenv/defaultenv-2-base/nv/autoboot_timeout
@@ -0,0 +1 @@
+3
\ No newline at end of file
diff --git a/defaultenv/defaultenv-2-base/nv/user b/defaultenv/defaultenv-2-base/nv/user
new file mode 100644
index 0000000..c86c3f3
--- /dev/null
+++ b/defaultenv/defaultenv-2-base/nv/user
@@ -0,0 +1 @@
+none
\ No newline at end of file
--
2.1.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
