On Wed, Nov 26, 2014 at 06:06:09PM +0100, Lucas Stach wrote: > Am Mittwoch, den 26.11.2014, 17:29 +0100 schrieb Sascha Hauer: > > This adds support for the Freescale i.MX6sx sabresdb board. > > > > Tested are: > > > > - UART > > - The three SD card slots > > - USB host > > - USB otg (host and device mode) > > - FEC (both) > > > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > --- > > [...] > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index dadbdeb..1ba448f 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -301,6 +301,10 @@ config MACH_SABRESD > > bool "Freescale i.MX6 SabreSD" > > select ARCH_IMX6 > > > > +config MACH_FREESCALE_IMX6SX_SABRESDB > > + bool "Freescale i.MX6sx SabreSDB" > > + select ARCH_IMX6SX > > + > > It seems you need to bash the PFUZE in the board startup code to get the > board to operate correctly. So this should select both I2C and I2C_IMX. Oh, right. Did that. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
