Hi Luigi,
On Fri, Oct 10, 2014 at 12:24:40AM +0200, luigi origa wrote:
> I'm trying to have barebox working on my mini2440. After many test,
> today i got a jtag interface and after some check i found this:
>
> - source s3c24x0_nand_boot -
> 2: ldr sp, =(TEXT_BASE - SZ_2M) /* Setup a temporary stack in SDRAM */
> /*
> * We still run at a location we are not linked to. But lets still running
> * from the internal SRAM, this may speed up the boot
> */
> push {lr}
> bl nand_boot
> pop {lr}
> /*
> * Adjust the return address to the correct address in SDRAM
> */
> ldr r1, =(TEXT_BASE - SZ_2M)
> add lr, lr, r1
>
> mov pc, lr
>
>
> - compiled s3c24x0_nand_boot -
> ROM:00000320 loc_320 ; CODE XREF:
> s3c24x0_nand_boot+10j
> ROM:00000320 MOV SP, #0x33C00000
> ROM:00000324 STMFD SP!, {LR}
> ROM:00000328 BL nand_boot
> ROM:0000032C LDMFD SP!, {LR}
> ROM:00000330 MOV R1, #0x33C00000
> ROM:00000334 ADD LR, LR, R1
>
>
> - source nand_boot -
> void __nand_boot_init nand_boot(void)
> {
> void *dest = _text;
> int size = ld_var(_barebox_image_size);
> int page = 0;
>
> s3c24x0_nand_load_image(dest, size, page);
> }
>
>
> - compiled nand_boot-
> ROM:000001E0 MOV R1, R0 // size
> ROM:000001E4 LDR R0, =0x33E00000 // *dest
> ROM:000001E8 MOV R2, #0
> ROM:000001EC LDMFD SP!, {R4,LR}
> ROM:000001F0 B s3c24x0_nand_load_image
>
>
> 0x33c00000 is the sdram stack where the program should be copied from
> nand. Unfortunately the function nand_boot copy from nand to sdram
> @0x33e00000.
>
> When s3c24x0_nand_boot try to jump in sdram, use a wrong address
> (0x33c00220 instead 0x33e00220).
>
> I don't know if the problem is in "TEXT_BASE - SZ_2M" or "_text".
Do you have PBL enabled? Could you enable PBL if not? Additionally
could you revert:
commit 558d72dc5116fc6275ea77c783cc65d6d1a5b521
Author: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Date: Sun May 18 16:46:29 2014 +0200
ARM Samsung: fix booting from NAND with pbl
The ARM pbl is linked at (TEXT_BASE - SZ_2M). This conflicts with the temporary
stack used in s3c24x0_nand_boot. Moving the stack to (TEXT_BASE - SZ_2M) fixes
this problem. With this patch a compressed barebox with pbl can boot on
mini2440 from NAND.
Signed-off-by: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
I suspect This patch fixed booting with PBL enabled but broke booting
without PBL.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
