U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH] ARM: mmu64: Don't flush freshly invalidated region
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/24] i.MX BBU improvements and bugfixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add Davicom phy + reset-gpios
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] scripts: imx: Add support for signed HDMI firmware
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: mmu64: Don't flush freshly invalidated region
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/3] ARM: start: Place malloc pool within 32-bit address space
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/3] net: fec: Bail out if DMA address is larger than 32-bits
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/3] mci: imx-esdhc: Bail out if DMA address is larger than 32-bits
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/3] i.MX8 malloc pool position and 32-bit only DMA
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/5] scsi: ilog2: create truly constant version for sparse
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/5] give up on gcc ilog2() constant optimizations
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/5] log2: Use fls_long() in __roundup_pow_of_two()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/5] linux/log2.h: fix kernel-doc notation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/5] log2: make order_base_2() behave correctly on const input value zero
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/5] include/linux/log2.h warning fix
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/24] ARM: i.MX: bbu: Detect which platforms need v2 i.MX header
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 11/24] ARM: i.MX: bbu: Alias imx5*_bbu_internal_mmc_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 22/24] block: Do not ignore error in blk->ops->write()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 24/24] bbu: command: Make sure specified update handler exists
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 20/24] ARM: i.MX: bbu: Use pwrite_full() instead of pwrite()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 18/24] ARM: nxp-imx8mq-evk: Add eMMC BBU configuration
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 21/24] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 17/24] ARM: i.MX: bbu: Add support for MMC on i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 15/24] ARM: i.MX: bbu: Add support for SPI/I2C on VFxxx
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 23/24] bbu: Report update failures explicitly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 13/24] ARM: i.MX: bbu: Move protect code into a separate routine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 19/24] libfile: Introduce pwrite_full()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 14/24] ARM: i.MX: bbu: Adjust FLASH_HEADER_OFFSET_MMC for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 12/24] ARM: i.MX: bbu: Alias imx5*_bbu_internal_spi_i2c_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/24] ARM: i.MX: bbu: Constify all 'devicefile' arguments
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 16/24] ARM: i.MX: zii-vf610-dev-rev-b/c: Add support for BBU on SPI-NOR
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 05/24] ARM: i.MX: bbu: Move inner-image type check
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 04/24] filetype: Add code to detect i.MX image v2
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 07/24] ARM: i.MX: bbu: Consolidate various update helpers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/24] ARM: i.MX: bbu: Simplify imx53_bbu_internal_nand_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/24] filetype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 02/24] filetype: Add arch/ to include path
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/24] ARM: i.MX: bbu: Drop IMX_INTERNAL_FLAG_NAND
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/24] ARM: i.MX: bbu: Remove unused define
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/24] i.MX BBU improvements and bugfixes
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/4] ratp: implement i2c read/write support
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support
  • From: "Baeuerle, Florian" <Florian.Baeuerle@xxxxxxxxxxxx>
• [PATCH] ARM: phytec-phycard-imx27: Add debug UART support
  • From: Florian Bäuerle <florian.baeuerle@xxxxxxxxxxxx>
• Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 3/3] at91sam9263ek: add PHY, miitool etc. to config
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v4 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v4 1/3] phylib: add Davicom PHY support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add Davicom phy + reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] phylib: add support for reset-gpios
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ratp: implement support for GPIO commands
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ratp: implement i2c read/write support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: i2c master send/receive mode
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] bbremote: add missing 'md' packet handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "i.MX: Add provisions to boot from IRAM"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: clk-sccg-pll: Remove leftover debug output
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: Do not route traffic to interfaces that are not up
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] include/common: Make use of ALIGN and ALIGN_DOWN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: cache-l2x0: Make use of IS_ALIGNED and ALIGN_DOWN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 3/4] ratp: implement support for GPIO commands
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/4] ratp: implement i2c read/write support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/4] bbremote: implement support for GPIO operations
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 3/4] ratp: implement support for GPIO commands
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 2/4] bbremote: implement i2c read/write support
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 1/4] ratp: implement i2c read/write support
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• RATP i2c and GPIO support
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 2/2] i2c_read: implement support for master receive mode
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c_write: document master send mode
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• i2c master send/receive mode
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH] bbremote: add missing 'md' packet handler
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] phylib: add support for reset-gpios
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: imx: add fusemap entries for i.MX6SDL silicon revision >=1.4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• barebox-2018.07.2 and barebox-2018.08.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Disable OTG controller during startup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] include/common: Make use of ALIGN and ALIGN_DOWN
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] Revert "i.MX: Add provisions to boot from IRAM"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: cache-l2x0: Make use of IS_ALIGNED and ALIGN_DOWN
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 20/22] block: Do not ignore error in blk->ops->write()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 15/22] ARM: i.MX: zii-vf610-dev-rev-b/c: Add support for BBU on SPI-NOR
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] clk: clk-sccg-pll: Remove leftover debug output
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] net: Do not route traffic to interfaces that are not up
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 21/22] bbu: Report update failures explicitly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 22/22] bbu: command: Make sure specified update handler exists
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 17/22] ARM: nxp-imx8mq-evk: Add eMMC BBU configuration
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 13/22] ARM: i.MX: bbu: Adjust FLASH_HEADER_OFFSET_MMC for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 12/22] ARM: i.MX: bbu: Move protect code into a separate routine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/22] ARM: i.MX: bbu: Alias imx5*_bbu_internal_spi_i2c_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 14/22] ARM: i.MX: bbu: Add support for SPI/I2C on VFxxx
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/22] ARM: i.MX: bbu: Alias imx5*_bbu_internal_mmc_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/22] ARM: i.MX: bbu: Constify all 'devicefile' arguments
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 16/22] ARM: i.MX: bbu: Add support for MMC on i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/22] ARM: i.MX: bbu: Detect which platforms need v2 i.MX header
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/22] ARM: i.MX: bbu: Simplify imx53_bbu_internal_nand_register_handler()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/22] filetype: Add code to detect i.MX image v2
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/22] ARM: i.MX: bbu: Drop IMX_INTERNAL_FLAG_NAND
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/22] ARM: i.MX: bbu: Remove unused define
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/22] filetype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/22] i.MX BBU improvements and bugfixes
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 3/3] at91sam9263ek: add PHY, miitool etc. to config
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v3 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v3 1/3] phylib: add Davicom PHY support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v3 0/3] Add Davicom phy + reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use
  • From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH 2/3] ARM: dts: update am335x-bone-common.dtsi to match kernel version
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use
  • From: marc@xxxxxxxxxxxxxxx
• Re: [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] nand command: fix null pointer when adding/deleting a bb device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte()
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Disable OTG controller during startup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH 2/3] ARM: dts: update am335x-bone-common.dtsi to match kernel version
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use
  • From: marc@xxxxxxxxxxxxxxx
• ARM: dts: udpates for am335x-bone-common
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH] nand command: fix null pointer when adding/deleting a bb device
  • From: <Oleg.Karfich@xxxxxxxx>
• Re: [PATCH] scripts/dtc: add fdtget to .gitignore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/14] MXS low-level improvements
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] scripts/dtc: add fdtget to .gitignore
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH v3 14/14] Documentation: MXS: general update and improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 13/14] ARM: MXS: mxs_power_status: align output
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 09/14] ARM: MXS: make power levels configurable in mx2*_power_init
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 12/14] ARM: MXS: mxs_power_status: use less magic values
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 10/14] ARM: MXS: fix VDDx brownout setup logic
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 11/14] ARM: MXS: make VDDx brownout setup more understandable
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 05/14] ARM: i.MX28: Add memory size detection
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 07/14] ARM: MXS: refactor mx2*_power_init source configuration
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 06/14] ARM: i.MX23: Add memory size detection
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 01/14] scripts: mxsimage: Allow unencrypted images
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 04/14] ARM: MXS: allow configuration of EMI clock prescaler
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 00/14] MXS low-level improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 02/14] images: MXS: allow generation of unencrypted bootstreams
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v3 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• v2018.08.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: lpuart: Avoid division by zero when requested baudrate is
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] i.MX8MQ boot source, reset reason, etc.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: i.MX: Add code to parse "input-enable"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: i2c: Fix build error in debug output code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: lpuart: Avoid division by zero when requested baudrate is
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 06/14] ARM: i.MX23: Add memory size detection
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/6] ARM: i.MX8MQ: Save boot location during initialization
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/6] ARM: i.MX8MQ: Replace magic numbers with named constants
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/6] ARM: i.MX: boot: Fix accidental comma
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/6] ARM: i.MX8MQ: Add code to detect reset reason
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/6] ARM: i.MX8M: Expose code to query cpu revision
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/6] i.MX8MQ boot source, reset reason, etc.
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] pinctrl: i.MX: Add code to parse "input-enable"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] i.MX: i2c: Fix build error in debug output code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 14/14] Documentation: MXS: general update and improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 04/14] ARM: MXS: allow configuration of EMI clock prescaler
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 10/14] ARM: MXS: fix VDDx brownout setup logic
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 13/14] ARM: MXS: mxs_power_status: align output
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 11/14] ARM: MXS: make VDDx brownout setup more understandable
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 00/14] MXS low-level improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 01/14] scripts: mxsimage: Allow unencrypted images
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 05/14] ARM: i.MX28: Add memory size detection
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 12/14] ARM: MXS: mxs_power_status: use less magic values
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 09/14] ARM: MXS: make power levels configurable in mx2*_power_init
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 02/14] images: MXS: allow generation of unencrypted bootstreams
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2 06/14] ARM: i.MX23: Add memory size detection
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2] HAB: fuse recommended OCOTP_DIR_BT_DIS
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• [PATCH 2/2] HAB: fuse recommended OCOTP_DIR_BT_DIS
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: imx: add fusemap entries for i.MX6SDL silicon revision >=1.4
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• Re: Help requested with Barebox on Globalscale Mirabox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC] Revert "i.MX: Add provisions to boot from IRAM"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [RFC] Revert "i.MX: Add provisions to boot from IRAM"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: VFxxx: zii-vf610-dev: Add newline before error banner
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eth: Make use of ETH_ALEN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] Documentation: fix code block and literal block highlighting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] phylib: add support for reset-gpios
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] FIT: be more verbose when RSA signature check fails
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: NFS boot - could not open /.tftp_tmp_path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fs: ramfs: get chunks zero initialized
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: NFS boot - could not open /.tftp_tmp_path
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: VFxxx: zii-vf610-dev: Make get_sytem_type() static
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] ARM: VFxxx: zii-vf610-dev: Add newline before error banner
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [RFC] Revert "i.MX: Add provisions to boot from IRAM"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] net: eth: Make use of ETH_ALEN
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 2/2] Documentation: fix code block and literal block highlighting
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH v2] FIT: be more verbose when RSA signature check fails
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS()
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Help requested with Barebox on Globalscale Mirabox
  • From: Leigh Brown <leigh@xxxxxxxxxxxxx>
• [PATCH] FIT: be more verbose when RSA signature check fails
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: NFS boot - could not open /.tftp_tmp_path
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: fix code block and literal block highlighting
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: NFS boot - could not open /.tftp_tmp_path
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: NFS boot - could not open /.tftp_tmp_path
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• NFS boot - could not open /.tftp_tmp_path
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 3/3] commands: teach commands that write to files to also create them
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] libfile: open_and_lseek: don't imply O_RDONLY
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/dtc: Reenable fdtget
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/dtc: Reenable fdtget
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: root= kernel cmdline parameter
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH] scripts/dtc: Reenable fdtget
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/dtc: Reenable fdtget
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: scripts/dtc/fdtget: No such file or directory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts/dtc: Reenable fdtget
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: scripts/dtc/fdtget: No such file or directory
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] at91sam9263ek: add PHY, miitool etc. to config
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 2/3] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 1/3] phylib: add Davicom PHY support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 0/3] Add Davicom phy + reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• scripts/dtc/fdtget: No such file or directory
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: optee in barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mx5: Implement Spectre v2 workaround for Cortex-A8
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: PATCH added tftp port to fsoptions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: root= kernel cmdline parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: kernel ubi boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Mark SP as being clobbered in arm_setup_stack()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: phytec-som-am335x: make autoenable actually usable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: s3c: fix providing info callback
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] of_node: clearify help text and do stricter commandline parsing
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] PCI: link PCI devices with potentially existing OF nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/19] ARM: SoCFPGA: Arria10: Early FPGA config
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: i.MX: HAB: fix missing include for EPERM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: dts: am335x-bone-common.dtsi: add eeprom device to DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] reset: socfpga: add missing driver name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: fix code block and literal block highlighting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc: send required clock pulses to card on init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] ARM: i.MX8MQ and EVK support, part II
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v1 2/2] phylib: add support for reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v1 1/2] phylib: add Davicom support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v1 0/2] Add Davicom phy + reset-gpios
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] ARM: Mark SP as being clobbered in arm_setup_stack()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support
  • From: "Schenk, Gavin" <G.Schenk@xxxxxxxxxxxx>
• [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: phytec-som-am335x: make autoenable actually usable
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: allow to actually enable sparse fastboot support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] mci: s3c: fix providing info callback
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: root= kernel cmdline parameter
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: root= kernel cmdline parameter
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• [PATCH] of_node: clearify help text and do stricter commandline parsing
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: PATCH added tftp port to fsoptions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Help requested with Barebox on Globalscale Mirabox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: root= kernel cmdline parameter
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: imx8mq-evk: Fix typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] imx_thermal: Fixed missing dependency for the IMX_THERMAL config
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] aiodev: Fix whitespaces in Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• RE: PATCH added tftp port to fsoptions
  • From: "Toews, Dietrich" <Dietrich.Toews@xxxxxxxxxxxxxx>
• Re: PATCH added tftp port to fsoptions
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• PATCH added tftp port to fsoptions
  • From: "Toews, Dietrich" <Dietrich.Toews@xxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: Cannot set GPIOs in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] pci: add quirk infrastructure
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] PCI: link PCI devices with potentially existing OF nodes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: imx6: gw54xx: add fixup for PCIe switch
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Help requested with Barebox on Globalscale Mirabox
  • From: Leigh Brown <leigh@xxxxxxxxxxxxx>
• root= kernel cmdline parameter
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• [PATCH 16/19] ARM: socfpga: Arria10: support programming FPGA in PBL
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 14/19] scripts: socfpga_mkimage: add size feature for PBL barebox
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 15/19] ARM: socfpga: arria10-reset-manager: don't reset bootsource
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 12/19] ARM: socfpga: achilles: update handoff files
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 13/19] ARM: dts: socfpga: Fix achilles dtc warnings
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 18/19] ARM: arria10: update defconfig
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 11/19] ARM: socfpga: arria10: fix SDMMC phase shift
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 03/19] mci: dw: move defines to headerfile
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 09/19] ARM: socfpga: arria10-init: split pinsetup
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 08/19] ARM: socfpga: add SMP_TWD_ADDR for Arria10
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 01/19] mci: dw_mmc: remove device_d pointer
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 04/19] bootm: allow booting SoCFPGA prebootloader image
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 02/19] mci: dw_mmc: convert to BIT() macro
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 00/19] ARM: SoCFPGA: Arria10: Early FPGA config
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 10/19] ARM: socfpga: arria10: set default TEXTBASE
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 17/19] ARM: socfpga: achilles: convert to PBL barebox
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 07/19] ARM: socfpga: arria10: add ocram base address
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 19/19] ARM: socfpga: achilles: move environment to raw partition
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 05/19] reset: socfpga: add missing driver name
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 06/19] ARM: socfpga: arria10: move debug_ll to common code
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: Cannot set GPIOs in barebox
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: Cannot set GPIOs in barebox
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: HAB: fix missing include
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS()
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: i.MX: OCOTP: fix missing include for uint32_t etc.
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 3/4] gpio: fix missing includes for bool and struct list_head
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: i.MX: HAB: fix missing include for EPERM
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: HAB: fix missing include
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• stable release v2018.07.1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] arm: dts: am335x-bone-common.dtsi: add eeprom device to DT
  • From: marc@xxxxxxxxxxxxxxx
• [PATCH] reset: socfpga: add missing driver name
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: kernel ubi boot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• kernel ubi boot
  • From: Dimitri Van Dyck | IndigoCare <Dimitri.VanDyck@xxxxxxxxxxxxxx>
• optee in barebox
  • From: siva <siva.v@xxxxxxxxxxx>
• [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] Documentation: fix code block and literal block highlighting
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 1/2] Documentation: don't highlight literal blocks as shell script
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 06/13] ARM: MXS: refactor mx2*_power_init source configuration
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 12/13] ARM: MXS: mxs_power_status: align output
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 07/13] ARM: MXS: allow starting from battery input without 4P2 source enabled
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 09/13] ARM: MXS: fix VDDx brownout setup logic
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 00/13] MXS/MX28 low-level improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 11/13] ARM: MXS: mxs_power_status: use less magic values
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 13/13] Documentation: MXS: general update and improvements
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 03/13] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 08/13] ARM: MXS: make power levels configurable in mx2*_power_init
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 02/13] images: MXS: allow generation of unencrypted bootstreams
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 01/13] scripts: mxsimage: Allow unencrypted images
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 10/13] ARM: MXS: make VDDx brownout setup more understandable
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH] mci: imx-esdhc: send required clock pulses to card on init
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools support in barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Problem booting Linux v4.8.15 from NAND on using Barebox
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Problem booting Linux v4.8.15 from NAND on using Barebox
  • From: Сапожников Игорь Валерьевич <i.sapozhnikov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 11/12] ARM: nxp-imx8mq-evk: Add bootflow comments
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 05/12] ARM: i.MX: fimware: Add pre-built BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 12/12] firmware: Fix copy-paste comment mistake
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/12] ARM: i.MX8MQ: Query and display ATF fimware hash if availible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/12] ARM: nxp-imx8mq-evk: Add code to load ATF BL31 blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/12] ARM: i.MX: xload-esdhc: Allow placing image to align its etnry point
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/12] ARM: i.MX: Move i.MX header definitions to mach-imx
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 02/12] ARM: Add code to support SMCCC on AArch64
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 04/12] ARM: i.MX8MQ: Add code to load BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 07/12] ARM: i.MX: xload-esdhc: Make use of <mach/imx-header.h>
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/12] ARM: i.MX8MQ: Configure cntfrq only in EL3
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/12] ARM: nxp-imx8mq-evk: Update DDR initialization code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/12] ARM: i.MX8MQ and EVK support, part II
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 04/11] ARM: i.MX8MQ: Add a macro to load BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: imx7d enable second core
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: imx7d enable second core
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• [PATCH] Documentation: imx8mq-evk: Fix typo
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Cannot set GPIOs in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Cannot set GPIOs in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: MFGtools support in barebox
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: qemu and barebox
  • From: Alessandro Rubini <rubini-list@xxxxxxxxx>
• Re: qemu and barebox
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: qemu and barebox
  • From: Giuseppe Levi <giuseppe.levi@xxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: qemu and barebox
  • From: Alessandro Rubini <rubini-list@xxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• Re: qemu and barebox
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• qemu and barebox
  • From: Giuseppe Levi <giuseppe.levi@xxxxxxxxx>
• Re: MFGtools support in barebox
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: barebox community/forum
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• MFGtools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: barebox community/forum
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: barebox community/forum
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• MFGTools support in barebox
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• barebox community/forum
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH 1/1] imx_thermal: Fixed missing dependency for the IMX_THERMAL config
  • From: Eugen Wiens <eugen.wiens@xxxxxxxx>
• Re: [PATCH v2] mx5: Implement Spectre v2 workaround for Cortex-A8
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• On vacation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net/e1000: allow to overwrite flash size from device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: iomuxv3: restore NO_PAD_CTRL semantic
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: imx-image: fix build with OpenSSL 1.1.x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Documentation: state: harmonize capitalization in headings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] mx5: Implement Spectre v2 workaround for Cortex-A8
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] fixup! net/e1000: allow to overwrite flash size from device tree
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] net/e1000: allow to overwrite flash size from device tree
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] mx5: Implement Spectre v2 workaround for Cortex-A8
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] mx5: Implement Spectre v2 workaround for Cortex-A8
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] scripts: imx-image: fix build with OpenSSL 1.1.x
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: MMU: fix arch_remap_range() across section boundaries
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: iomuxv3: restore NO_PAD_CTRL semantic
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] ARM: MMU: fix arch_remap_range() across section boundaries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Documentation: state: fix typos
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Documentation: state: add unit name to state variable in DT
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH 1/3] Documentation: state: harmonize capitalization in headings
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 2/3] Documentation: state: fix typos
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 3/3] Documentation: state: add unit name to state variable in DT
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH] cmdlinepart: Allow empty string
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2018.07.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mtd: gpmi-nand: Make sure clock is disabled during rate change
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: imx: remove unused clk_gate2_inverted
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] nvmem: rave-sp-eeprom: Remove VLA usage
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] nvmem: rave-sp-eeprom: Remove VLA usage
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: rdu1: Make use of "zii,eeprom-name"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/4] ARM: dts: rdu2: Make use of "zii,eeprom-name"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/4] nvmem: rave-sp-eeprom: Add support for "zii,eeprom-name"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/4] nvmem: rave-sp-eeprom: Remove VLA usage
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 06/11] ARM: i.MX: xload-esdhc: Allow patching first word of the image
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 10/11] ARM: nxp-imx8mq-evk: Add bootflow comments
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 07/11] ARM: i.MX: fimware: Add pre-built BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 04/11] ARM: i.MX8MQ: Add a macro to load BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 02/11] ARM: Add code to support SMCCC on AArch64
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: rdu1: Add nodes for RAVE SP EEPROM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: Troubles running qemu64 target
  • From: ranquet guillaume <ranquet.guillaume@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Mogens Lauridsen <mlauridsen171@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: rdu1: Add nodes for RAVE SP EEPROM
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 02/11] ARM: Add code to support SMCCC on AArch64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 04/11] ARM: i.MX8MQ: Add a macro to load BL31 ATF blob
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 06/11] ARM: i.MX: xload-esdhc: Allow patching first word of the image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: nxp-imx8mq-evk: Add bootflow comments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 07/11] ARM: i.MX: fimware: Add pre-built BL31 ATF blob
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: rdu1: Add nodes for RAVE SP EEPROM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: i.MX: Add support for ZII RDU1 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: i.MX: bbu: support partitions starting at i.MX header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] bbu: reserve upper 16 bits for handler specific flags
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: i.MX: bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: i.MX: bbu: remove handler specific flags variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] bbu: i.MX: Generalize IMX_INTERNAL_FLAG_KEEP_DOSPART flag
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] arm: arria10: enable errata 794072 and 845369
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: don't include generated header files into MIPS asm files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/11] ARM: i.MX8MQ: Add a macro to load BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/11] ARM: i.MX: fimware: Add pre-built BL31 ATF blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/11] firmware: Fix copy-paste comment mistake
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/11] ARM: i.MX8MQ: Query and display ATF fimware hash if availible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/11] ARM: nxp-imx8mq-evk: Add bootflow comments
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/11] ARM: nxp-imx8mq-evk: Add code to load ATF BL31 blob
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/11] ARM: i.MX: xload-esdhc: Allow patching first word of the image
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/11] ARM: i.MX: xload-esdhc: Move image base to MX8MQ_ATF_BL33_BASE_ADDR
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/11] ARM: i.MX8MQ: Configure cntfrq only in EL3
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/11] ARM: Add code to support SMCCC on AArch64
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/11] ARM: nxp-imx8mq-evk: Update DDR initialization code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/11] ARM: i.MX8MQ and EVK support, part II
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: rdu1: Add node for backlight device
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/3] ARM: dts: rdu1: Specify "boot-source" NVMEM cell
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: rdu1: Add nodes for RAVE SP EEPROM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] fixup! ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v4 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX bbu: support partitions starting at i.MX header
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: Troubles running qemu64 target
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 03/12] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] ARM: imx6qp: fix NoC QoS passthrough for new cpu type functions.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] net: designware: make sure DMA is disabled on kernel start.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] arm: arria10: enable errata 794072 and 845369
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] net: designware: make sure DMA is disabled on kernel start.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] arm: arria10: enable errata 794072 and 845369
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/12] Add initial RISC-V architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] MIPS: don't include generated header files into MIPS asm files
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 03/12] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Troubles running qemu64 target
  • From: Raphaël Poggi <poggi.raph@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] Add initial RISC-V architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/12] Add initial RISC-V architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX bbu: support partitions starting at i.MX header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: i.MX bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Troubles running qemu64 target
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: imx6qp: fix NoC QoS passthrough for new cpu type functions.
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Mogens Lauridsen <mlauridsen171@xxxxxxxxx>
• Troubles running qemu64 target
  • From: ranquet guillaume <ranquet.guillaume@xxxxxxxxx>
• Re: [PATCH v2 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 02/12] MIPS: Use generic GCC library routines from lib/
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 10/12] RISC-V: add erizo_generic_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 07/12] RISC-V: erizo: add DEBUG_LL support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 08/12] RISC-V: erizo: enable nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 03/12] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 06/12] RISC-V: add nmon nano-monitor
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 04/12] RISC-V: add Erizo SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 12/12] Documentation: add RISC-V docs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 11/12] scripts: add nmon-loader
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 09/12] RISC-V: erizo: add nmon image creation
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 01/12] lib: Add shared copies of some GCC library routines
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 00/12] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 05/12] RISC-V: add low-level debug macros for ns16550
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] ARM: i.MX53: Make clock tree setup better readable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4 08/10] ARM: i.MX: bbu: Allow plain i.MX v1 images as a special case
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 03/10] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 09/10] ARM: i.MX: bbu: Make struct imx_internal_bbu_handler public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 07/10] filtype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 05/10] ARM: i.MX: bbu: Make imx_bbu_internal_v1_update() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 06/10] ARM: i.MX: Move i.MX header definitions to mach-imx
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 04/10] bbu: Make bbu_find_handler_by_device() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 02/10] common: clock: Sample time before poller_call()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 01/10] mtd: mtd_dataflash: Don't print bogus command values for READs
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 00/10] ZII RDU1 support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 2/2] ARM: rdu2: Fetch MAC address info from RAVE SP EEPROM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: i.MX53: Set pll3 directly to 216MHz.
  • From: Mogens Lauridsen <mlauridsen171@xxxxxxxxx>
• Re: [PATCH 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] ZII RDU1 support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] nvmem: Introduce nvmem_cell_get_and_read()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] ARM: rdu2: Fetch MAC address info from RAVE SP EEPROM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 10/10] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 08/10] ARM: i.MX: bbu: Allow plain i.MX v1 images as a special case
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 09/10] ARM: i.MX: bbu: Make struct imx_internal_bbu_handler public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 07/10] filtype: Add code to detect i.MX image v1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 05/10] ARM: i.MX: bbu: Make imx_bbu_internal_v1_update() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 04/10] bbu: Make bbu_find_handler_by_device() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 03/10] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 00/10] ZII RDU1 support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 02/10] common: clock: Sample time before poller_call()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 06/10] ARM: i.MX: Move i.MX header definitions to mach-imx
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 01/10] mtd: mtd_dataflash: Don't print bogus command values for READs
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] RAVE SP RDU2-related changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: imx: implement support for limiting host to full speed
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! dts: update to v4.18-rc1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] fs: devfs-core: Make use of devpath_to_name()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] MIPS: dts: drop skeleton.dtsi
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: i.MX: Add support for ZII RDU1 board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: i.MX: Add support for ZII RDU1 board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/6] watchdog: rave-sp-wdt: Remove bogus leftover code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/6] watchdog: rave-sp-wdt: Explicitly access EEPROM for bootsource
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/6] ARM: dts: rdu2: Specify "boot-source" NVMEM cell
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/6] ARM: dts: rdu2: Add node for backlight device
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/6] ARM: dts: rdu2: Add nodes for RAVE SP EEPROM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/6] ARM: dts: rdu2: Remove obsolete 'pic' node in uart4
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/6] RAVE SP RDU2-related changes
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] fixup! dts: update to v4.18-rc1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/4] fs: devfs-core: Make use of devpath_to_name()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/4] commands: mount: Make use of devpath_to_name()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/4] commands: mmc_extcsd: Make use of devpath_to_name()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/4] drivers: of: Make use of devpath_to_name()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] usb: imx: implement support for limiting host to full speed
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• [PATCH] net: avoid assigning ethaddr to wrong devices
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• imx53 hang in barebox boot
  • From: Mogens Lauridsen <mll@xxxxxxxxxxxxx>
• Re: [PATCH] nvmem: Port RAVE SP EEPROM driver from Linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] video: Port RAVE SP backlight driver from Linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] MIPS: dts: drop skeleton.dtsi
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 2/2] MIPS: dts: fix dtc unit_address_vs_reg warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 0/2] MIPS: dts: drop skeleton.dtsi
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] video: backlight: add slew time parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: rdu2: Make use of imx_setup_pad()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: babbage: Make use of imx_setup_pad()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 2/4] bbu: Make bbu_find_handler_by_device() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 3/4] ARM: i.MX: bbu: Make imx_bbu_internal_v1_update() public
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 1/4] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 0/4] ZII RDU1 support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: rdu2: program e1000 iNVM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] MIPS: dts: drop skeleton.dtsi
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] MIPS: dts: drop skeleton.dtsi
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: dts: drop skeleton.dtsi
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] ARM: rdu2: program e1000 iNVM
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2] video: backlight: add slew time parameter
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: babbage: Make PMIC initialization shareable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: rdu2: Make use of imx_setup_pad()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: i.MX: babbage: Make use of imx_setup_pad()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] MIPS: dts: drop skeleton.dtsi
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] MIPS: dts: drop skeleton.dtsi
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] mmc_extcsd command: Add cmd option to set bkops-enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: advantech-rom-7421: add hog pinctrl node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX: Add support for ZII RDU1 board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX: Add support for ZII RDU1 board
  • From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX: Add support for ZII RDU1 board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: babbage: Make PMIC initialization shareable
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 00/27] Console code consolidation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] console_simple: add newline conversion for putc_ll case
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] console: remove duplicate newline conversion
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] console_simple: Fix newline conversion
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] console_simple: Remove duplicated newline conversion
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] console: add missing newline conversion for putc_ll
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: dts: remove @0 from environment nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: dts: use stdout-path property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] dtc: Disable some warnings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] console: Update description for global.linux.bootargs.console
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: dts: imx6q-var-custom: remove some accidently pasted text
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/5] fix/quiesce dtc warnings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: Port RAVE SP backlight driver from Linux kernel
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] nvmem: Port RAVE SP EEPROM driver from Linux kernel
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] ARM: i.MX: Add support for ZII RDU1 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] ARM: babbage: Make PMIC initialization shareable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 00/27] Console code consolidation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2] nand-bb: mtd_del_bb: fix missing pointer reset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] ELF fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/27] Console code consolidation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 14/27] console: Consolidate DEBUG_LL and CONSOLE_* puts() implementations
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 13/27] console: Consolidate DEBUG_LL and CONSOLE_* '\n' -> '\n\r' code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 14/27] console: Consolidate DEBUG_LL and CONSOLE_* puts() implementations
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 13/27] console: Consolidate DEBUG_LL and CONSOLE_* '\n' -> '\n\r' code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripte: mxsimage: Allow unencrypted images
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] scripte: mxsimage: Allow unencrypted images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] nand-bb: mtd_del_bb: fix missing pointer reset
  • From: <Heinrich.Toews@xxxxxxxx>
• [PATCH] mmc_extcsd command: Add cmd option to set bkops-enable
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH] nand-bb: mtd_del_bb: fix missing pointer reset
  • From: <Heinrich.Toews@xxxxxxxx>
• [PATCH v1 0/2] ELF fixes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] fixup! add basic ELF parser
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] fixup! MIPS: bootm: add ELF handler
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: psci: Remove unused code in psci_entry()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: advantech-rom-7421: add hog pinctrl node
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>