This patch is a minimal port of the corresponding driver that can be
found in Linux kernel (drivers/thermal/qoriq_thermal.c).
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
Changes since [v1]:
- None
[v1] http://lists.infradead.org/pipermail/barebox/2018-September/034789.html
drivers/aiodev/Kconfig | 7 +
drivers/aiodev/Makefile | 1 +
drivers/aiodev/qoriq_thermal.c | 264 +++++++++++++++++++++++++++++++++
3 files changed, 272 insertions(+)
create mode 100644 drivers/aiodev/qoriq_thermal.c
diff --git a/drivers/aiodev/Kconfig b/drivers/aiodev/Kconfig
index 3eabd3b3f..7f1d0fd4a 100644
--- a/drivers/aiodev/Kconfig
+++ b/drivers/aiodev/Kconfig
@@ -16,6 +16,13 @@ config IMX_THERMAL
Support for Temperature Monitor (TEMPMON) found on Freescale
i.MX SoCs.
+config QORIQ_THERMAL
+ tristate "QorIQ Thermal Monitoring Unit"
+ depends on ARCH_IMX8MQ
+ help
+ Support for Thermal Monitoring Unit (TMU) found on QorIQ and
+ i.MX8MQ platforms.
+
config LM75
tristate "LM75 driver"
depends on I2C
diff --git a/drivers/aiodev/Makefile b/drivers/aiodev/Makefile
index 1dcf6cdc4..d5318deeb 100644
--- a/drivers/aiodev/Makefile
+++ b/drivers/aiodev/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_AIODEV) += core.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_LM75) += lm75.o
obj-$(CONFIG_MC13XXX_ADC) += mc13xxx_adc.o
+obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
diff --git a/drivers/aiodev/qoriq_thermal.c b/drivers/aiodev/qoriq_thermal.c
new file mode 100644
index 000000000..d29da02a6
--- /dev/null
+++ b/drivers/aiodev/qoriq_thermal.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <clock.h>
+#include <driver.h>
+#include <xfuncs.h>
+#include <errno.h>
+#include <io.h>
+#include <aiodev.h>
+#include <of_address.h>
+#include <linux/clk.h>
+
+#define SITES_MAX 16
+
+#define TMU_TEMP_PASSIVE_COOL_DELTA 10000
+
+/*
+ * QorIQ TMU Registers
+ */
+struct qoriq_tmu_site_regs {
+ u32 tritsr; /* Immediate Temperature Site Register */
+ u32 tratsr; /* Average Temperature Site Register */
+ u8 res0[0x8];
+};
+
+struct qoriq_tmu_regs {
+ u32 tmr; /* Mode Register */
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+ u32 tsr; /* Status Register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+#define TMTMIR_DEFAULT 0x0000000f
+ u8 res0[0x14];
+ u32 tier; /* Interrupt Enable Register */
+#define TIER_DISABLE 0x0
+ u32 tidr; /* Interrupt Detect Register */
+ u32 tiscr; /* Interrupt Site Capture Register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u8 res1[0x10];
+ u32 tmhtcrh; /* High Temperature Capture Register */
+ u32 tmhtcrl; /* Low Temperature Capture Register */
+ u8 res2[0x8];
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u8 res3[0x24];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res4[0x78];
+ struct qoriq_tmu_site_regs site[SITES_MAX];
+ u8 res5[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res6[0x310];
+ u32 ttr0cr; /* Temperature Range 0 Control Register */
+ u32 ttr1cr; /* Temperature Range 1 Control Register */
+ u32 ttr2cr; /* Temperature Range 2 Control Register */
+ u32 ttr3cr; /* Temperature Range 3 Control Register */
+};
+
+/*
+ * Thermal zone data
+ */
+struct qoriq_tmu_data {
+ struct device_d *dev;
+ struct clk *clk;
+ struct qoriq_tmu_regs __iomem *regs;
+ int sensor_id;
+ bool little_endian;
+ int temp_passive;
+ int temp_critical;
+
+ struct aiodevice aiodev;
+ struct aiochannel aiochan;
+};
+
+static inline struct qoriq_tmu_data *to_qoriq_tmu_data(struct aiochannel *chan)
+{
+ return container_of(chan, struct qoriq_tmu_data, aiochan);
+}
+
+static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
+{
+ if (p->little_endian)
+ iowrite32(val, addr);
+ else
+ iowrite32be(val, addr);
+}
+
+static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
+{
+ if (p->little_endian)
+ return ioread32(addr);
+ else
+ return ioread32be(addr);
+}
+
+static int tmu_get_temp(struct aiochannel *chan, int *temp)
+{
+ u32 val;
+ struct qoriq_tmu_data *data = to_qoriq_tmu_data(chan);
+
+ val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
+
+ *temp = (val & 0xff) * 1000;
+
+ return 0;
+}
+
+static int qoriq_tmu_get_sensor_id(void)
+{
+ int ret, id;
+ struct of_phandle_args sensor_specs;
+ struct device_node *np, *sensor_np;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np)
+ return -ENODEV;
+
+ sensor_np = of_get_next_child(np, NULL);
+ ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, &sensor_specs);
+ if (ret)
+ return ret;
+
+ if (sensor_specs.args_count >= 1) {
+ id = sensor_specs.args[0];
+ WARN(sensor_specs.args_count > 1,
+ "%s: too many cells in sensor specifier %d\n",
+ sensor_specs.np->name, sensor_specs.args_count);
+ } else {
+ id = 0;
+ }
+
+ return id;
+}
+
+static int qoriq_tmu_calibration(struct qoriq_tmu_data *data)
+{
+ int i, val, len;
+ u32 range[4];
+ const u32 *calibration;
+ struct device_node *np = data->dev->device_node;
+
+ if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
+ dev_err(data->dev, "missing calibration range.\n");
+ return -ENODEV;
+ }
+
+ /* Init temperature range registers */
+ tmu_write(data, range[0], &data->regs->ttr0cr);
+ tmu_write(data, range[1], &data->regs->ttr1cr);
+ tmu_write(data, range[2], &data->regs->ttr2cr);
+ tmu_write(data, range[3], &data->regs->ttr3cr);
+
+ calibration = of_get_property(np, "fsl,tmu-calibration", &len);
+ if (calibration == NULL || len % 8) {
+ dev_err(data->dev, "invalid calibration data.\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < len; i += 8, calibration += 2) {
+ val = of_read_number(calibration, 1);
+ tmu_write(data, val, &data->regs->ttcfgr);
+ val = of_read_number(calibration + 1, 1);
+ tmu_write(data, val, &data->regs->tscfgr);
+ }
+
+ return 0;
+}
+
+static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
+{
+ /* Disable interrupt, using polling instead */
+ tmu_write(data, TIER_DISABLE, &data->regs->tier);
+
+ /* Set update_interval */
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+
+ /* Disable monitoring */
+ tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+}
+
+static int qoriq_tmu_probe(struct device_d *dev)
+{
+ struct device_node *np = dev->device_node;
+ struct qoriq_tmu_data *data;
+ u32 site;
+ int ret;
+
+ data = xzalloc(sizeof(*data));
+
+ data->dev = dev;
+ data->little_endian = of_property_read_bool(np, "little-endian");
+
+ data->sensor_id = qoriq_tmu_get_sensor_id();
+ if (data->sensor_id < 0) {
+ dev_err(dev, "Failed to get sensor id\n");
+ return -ENODEV;
+ }
+
+ data->regs = dev_request_mem_region(dev, 0);
+ if (IS_ERR(data->regs)) {
+ dev_err(dev, "Failed to get memory region\n");
+ return PTR_ERR(data->regs);
+ }
+
+ qoriq_tmu_init_device(data); /* TMU initialization */
+
+ ret = qoriq_tmu_calibration(data); /* TMU calibration */
+ if (ret < 0) {
+ dev_err(dev, "Failed to calibrate\n");
+ return ret;
+ }
+
+ data->aiodev.num_channels = 1;
+ data->aiodev.hwdev = dev;
+ data->aiodev.channels = xmalloc(data->aiodev.num_channels *
+ sizeof(data->aiodev.channels[0]));
+ data->aiodev.channels[0] = &data->aiochan;
+ data->aiochan.unit = "mC";
+ data->aiodev.read = tmu_get_temp;
+
+ ret = aiodevice_register(&data->aiodev);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register aiodev\n");
+ return ret;
+ }
+
+ site = 0x1 << (15 - data->sensor_id);
+ tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
+
+ return 0;
+}
+
+static const struct of_device_id qoriq_tmu_match[] = {
+ { .compatible = "fsl,qoriq-tmu", },
+ { .compatible = "fsl,imx8mq-tmu",},
+ {},
+};
+
+static struct driver_d imx_thermal_driver = {
+ .name = "qoriq_thermal",
+ .probe = qoriq_tmu_probe,
+ .of_compatible = DRV_OF_COMPAT(qoriq_tmu_match),
+};
+device_platform_driver(imx_thermal_driver);
--
2.17.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
