Everyone: Patches in this series are a result of my work on porting Linux code for MV88E6xxx switches to Barebox. - Patch 1 is loosely related header fix - Patches 2 and 3 add clocksource support for ARM global time, needed on VF610 in order to get an accurate clocksource. MV88E6xxx EEPROM supporte code turned out to be dependent on that. - Pathes 4 and 5 are clocksource related fixes - Patches 6, 7, 8, 9 update the device naming scheme used by Barebox driver code. Old scheme couldn't handle devices created for DT nodes with identical names. This was the case on ZII VF610 Development Board Rev. C which had two switch devices. - Patch 10 is documentation/small code fix for generic MDIO bus code - Patches 11, 12 bring needed preprocessor constants from Linux kernel - Patch 13 prevents PHYs masked by MDIO bus's phy_maks from being probed - Patch 14 allows custom platform deviecs to be attached to an MDIO bus - Patch 15 exposes internal MDIO bus on MV88E6xxx devices - Patch 16 support for EEPROM devices attached to MV88E6xxx devices - Patch 17 exposes ports that don't have a PHY attached as "virtual" PHY devices (RPU2 needs this code to properly configure port connected to FEC) NOTE: This is quite a mix and I am more than happy to split this series in several if current patch grouping is problematic. Tested on the following H/W: - ZII i.MX6Q RDU2, MV88E6352 switch - ZII i.MX51 RDU1, MV88E6161 switch - ZII i.MX7D RPU2, MV88E6352 switch - ZII VF610 CFU1, MV88E6352 switch - ZII VF610 SPU3, MV88E6390X switch - ZII VF610 Development Board Rev. C, MV88E6390X switch x 2 Feedback is welcome! Changes since [v1]: - CONFIG_CLOCKSOURCE_ARM_GLOBAL_TIMER is not selected by default. VF610 now selects it explicitly - Incorrect logic in patch 14/17 was fixed to correctly handle PHY nodes that have "compatible" property - Added more documentation for dev_set_name() [v1] http://lists.infradead.org/pipermail/barebox/2018-October/034963.html Thanks, Andrey Smirnov Andrey Smirnov (17): ARM: Do not expose ARMv8 functions on ARMv7 clocksource: Add ARM global timer support VFxxx: Select CLOCKSOURCE_ARM_GLOBAL_TIMER i.MX: Move GPT driver to drivers/clocksource clocksource: Introduce ARCH_HAS_IMX_GPT of: Demote "Bad cell count for" to debug drivers: Introduce dev_set_name() linux: string: Port kbasename() of: Port latest of_device_make_bus_id() implementation mdio_bus: Fix documentation for mdio_bus_match() include: linux: phy: Add missing PHY_INTERFACE_* constants include: linux: ethtool: Add missing *_UNKNOWN constants net: phy: Check phy_mask in get_phy_device() mdio_bus: Allow for non PHY-devices on MDIO buses net: phy: Add basic driver for MV88E6XXX switches from Marvell net: phy: mv88e6xxx: Port EEPROM support code net: phy: mv88e6xxx: Add support for MAC ports arch/arm/include/asm/system.h | 2 +- arch/arm/mach-imx/Kconfig | 12 + arch/arm/mach-imx/Makefile | 1 - arch/arm/mach-imx/iim.c | 2 +- .../arm/mach-imx/include/mach/devices-imx51.h | 2 +- .../arm/mach-imx/include/mach/devices-imx53.h | 2 +- arch/arm/mach-mxs/include/mach/devices.h | 2 +- arch/arm/mach-mxs/ocotp.c | 2 +- arch/sandbox/board/console.c | 2 +- common/console.c | 4 +- common/state/state.c | 2 +- drivers/aiodev/core.c | 2 +- drivers/amba/bus.c | 2 +- drivers/ata/disk_ata_drive.c | 4 +- drivers/base/bus.c | 2 +- drivers/base/driver.c | 47 +- drivers/base/resource.c | 2 +- drivers/clocksource/Kconfig | 10 + drivers/clocksource/Makefile | 2 + drivers/clocksource/arm_global_timer.c | 113 +++ .../clocksource/timer-imx-gpt.c | 0 drivers/efi/efi-device.c | 2 +- drivers/firmware/socfpga.c | 2 +- drivers/i2c/i2c.c | 4 +- drivers/mci/mci-core.c | 4 +- drivers/mfd/rave-sp.c | 2 +- drivers/mtd/core.c | 2 +- drivers/mtd/spi-nor/cadence-quadspi.c | 2 +- drivers/mtd/ubi/build.c | 2 +- drivers/mtd/ubi/vmt.c | 4 +- drivers/net/cpsw.c | 2 +- drivers/net/e1000/eeprom.c | 2 +- drivers/net/orion-gbe.c | 2 +- drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio_bus.c | 27 +- drivers/net/phy/mv88e6xxx/Makefile | 5 + drivers/net/phy/mv88e6xxx/chip.c | 945 ++++++++++++++++++ drivers/net/phy/mv88e6xxx/chip.h | 143 +++ drivers/net/phy/mv88e6xxx/global2.c | 389 +++++++ drivers/net/phy/mv88e6xxx/global2.h | 70 ++ drivers/net/phy/mv88e6xxx/port.c | 666 ++++++++++++ drivers/net/phy/mv88e6xxx/port.h | 127 +++ drivers/net/phy/phy.c | 15 +- drivers/nvmem/core.c | 2 +- drivers/nvmem/ocotp.c | 2 +- drivers/of/address.c | 4 +- drivers/of/platform.c | 80 +- drivers/pci/bus.c | 3 +- drivers/phy/phy-core.c | 2 +- drivers/pwm/core.c | 2 +- drivers/rtc/class.c | 2 +- drivers/spi/spi.c | 2 +- drivers/usb/core/usb.c | 5 +- drivers/usb/gadget/udc-core.c | 4 +- drivers/usb/musb/musb_dsps.c | 2 +- drivers/video/backlight.c | 2 +- drivers/video/fb.c | 2 +- drivers/w1/w1.c | 4 +- drivers/watchdog/wd_core.c | 2 +- fs/fs.c | 2 +- include/driver.h | 11 +- include/linux/ethtool.h | 3 + include/linux/phy.h | 9 + include/linux/string.h | 12 + net/eth.c | 2 +- 66 files changed, 2669 insertions(+), 131 deletions(-) create mode 100644 drivers/clocksource/arm_global_timer.c rename arch/arm/mach-imx/clocksource.c => drivers/clocksource/timer-imx-gpt.c (100%) create mode 100644 drivers/net/phy/mv88e6xxx/Makefile create mode 100644 drivers/net/phy/mv88e6xxx/chip.c create mode 100644 drivers/net/phy/mv88e6xxx/chip.h create mode 100644 drivers/net/phy/mv88e6xxx/global2.c create mode 100644 drivers/net/phy/mv88e6xxx/global2.h create mode 100644 drivers/net/phy/mv88e6xxx/port.c create mode 100644 drivers/net/phy/mv88e6xxx/port.h -- 2.17.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox