Everyone:
This is a number of i.MX8MQ or EVK related changes that are sitting in
my repo that I am hoping to upstream:
- Pactches 1, 3, 4 are clock related fixes needed to get FEC,
USDHC1 and USDHC2 to work.
- Patch 2 was made while working custom i.MX8MQ board (not
upstreamed yet) that made use of that controller
- Patch 5 should be self-explanatory bug fix
- Patch 6 is PHY configuration code need to use FEC on EVK
- Patch 7 and 8 are both conveninece code to avoid having to
specify memory size explicitly as well as a second part of a fix
for a problem discussed in [1]
Changes since [v1]:
- Removed redundant DT code in patch 6
Changes since [v2]:
- Patch 7 re-written such that the code could also be re-used for
i.MX7 (will be submitted in a separate series)
[1] http://lists.infradead.org/pipermail/barebox/2018-August/034402.html
[v1] http://lists.infradead.org/pipermail/barebox/2018-September/034742.html
[v2] http://lists.infradead.org/pipermail/barebox/2018-September/034772.html
Andrey Smirnov (8):
clk: i.MX8MQ: Bump refcounters of various important clocks
ARM: i.MX8MQ: Add missing node for ECSPI1
ARM: i.MX8MQ: Configure USDHC1,2 clocks
ARM: i.MX8MQ: Configure FEC1 clocks
ARM: nxp-imx8mq-evk: Add missing compatibility check
ARM: nxp-imx8mq-evk: Add FEC's PHY configuration code
ARM: i.MX: esdctl: Add memory size detection for i.MX8MQ
ARM: nxp-imx8mq-evk: Make use of memory size detection code
arch/arm/boards/nxp-imx8mq-evk/board.c | 27 ++-
arch/arm/boards/nxp-imx8mq-evk/lowlevel.c | 4 +-
arch/arm/dts/imx8mq-ddrc.dtsi | 17 ++
arch/arm/dts/imx8mq-evk.dts | 7 +-
arch/arm/dts/imx8mq.dtsi | 42 +++++
arch/arm/mach-imx/esdctl.c | 191 ++++++++++++++++++++++
arch/arm/mach-imx/include/mach/esdctl.h | 1 +
drivers/clk/imx/clk-imx8mq.c | 12 ++
8 files changed, 293 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/dts/imx8mq-ddrc.dtsi
--
2.17.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
