On Mon, Sep 17, 2018 at 05:30:56PM +0200, perachet7@xxxxxxxxx wrote: > Hello Sascha, > > Thank you for this patch. Happy to test it here on rk3188 (radxa rock pro). > > Using bb v2018.09.0. Applied your patches below. CONFIG_PBL_RELOCATABLE is > fixed in menuconfig. Common config: > > grep RELOCAT .config > CONFIG_PBL_RELOCATABLE=y > CONFIG_RELOCATABLE=y > > Built using this script: > > export ARCH=arm > #export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- > export CROSS_COMPILE=/opt/OSELAS.Toolchain-2018.02.0/arm-v7m-eabi/gcc-7.3.1- > newlib-2.5.0-binutils-2.30/bin/arm-v7m-eabi- Not sure if this is intentional – you are using thre ARMv7-M toolchain here but as far as I understand, your could use the ARMv7-A variant (arm-v7a-linux-gnueabi/hf) for the rk3188. - Roland -- Roland Hieber | r.hieber@xxxxxxxxxxxxxx | Pengutronix e.K. | https://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
