Linux Wireless
Thread Index
[
Prev Page
][
Next Page
]
Re: pull request: wireless-2.6 2010-04-20
From
: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH 2/2] ath9k_hw: make all AR9002 initvals use u32
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: mac80211 and asymmetric 802.11n TX/RX
From
: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
Re: [PATCH 2/2] ath9k_hw: make all AR9002 initvals use u32
From
: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
[PATCH 0/2] ath9k_hw: few initval cosmetic changes
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH 2/2] ath9k_hw: make all AR9002 initvals use u32
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH 1/2] ath9k_hw: make two initvals consto for the AR9001 family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
pull request: wireless-2.6 2010-04-20
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Problem with AR5001 on eeepc900A after disable with RFKILL switch
From
: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Till Kamppeter <till.kamppeter@xxxxxxxxx>
Re: mac80211 and asymmetric 802.11n TX/RX
From
: Daniel Halperin <dhalperi@xxxxxxxxxxxxxxxxx>
Re: iwl3945: Error sending REPLY_{RXON|SCAN_CMD|TX_PWR_TABLE_CMD} time out after 500ms
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: 2.6.34-rc5: Reported regressions from 2.6.33
From
: Nick Bowler <nbowler@xxxxxxxxxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Grant Likely <grant.likely@xxxxxxxxxxxx>
Re: [ath9k-devel] ath9k: corrupt frames forwarded to mac80211 as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
Re: [ath9k-devel] ath9k: corrupt frames forwarded to mac80211 as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[PATCH] mac80211: Fix ieee80211_sta_conn_mon_timer with hw connection monitoring
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: p54pci does not work
From
: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Re: [ath9k-devel] ath9k: corrupt frames forwarded to mac80211 as decrypted
From
: Ranga Rao Ravuri <ranga.ravuri@xxxxxxxxxxx>
Re: [RFC][PATCH 1/2] ath9k: fix corrupt frames being forwarded to mac80211
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
Re: [ath9k-devel] [RFC][PATCH 2/6] ath9k: do not mark frames with RXKEY_IX_INVALID as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 2/2] ath9k: use also AR_DecryptBusyErr to determine decrypt errors
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 1/2] ath9k: fix corrupt frames being forwarded to mac80211
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
Re: [ath9k-devel] ath9k: corrupt frames forwarded to mac80211 as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
Re: mac80211 and asymmetric 802.11n TX/RX
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH] ath9k-htc: speedup disconnect handling
From
: Ming Lei <tom.leiming@xxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Till Kamppeter <till.kamppeter@xxxxxxxxx>
mac80211 and asymmetric 802.11n TX/RX
From
: Daniel Halperin <dhalperi@xxxxxxxxxxxxxxxxx>
Re: [PATCH] ath9k-htc: speedup disconnect handling
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH v2] mac80211: document IEEE80211_CONF_CHANGE_QOS
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH] ath9k-htc: speedup disconnect handling
From
: Ming Lei <tom.leiming@xxxxxxxxx>
Re: [RFC PATCHv3 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCHv3 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[PATCH] ath9k-htc: speedup disconnect handling
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
Re: 2.6.34-rc5: Reported regressions from 2.6.33
From
: "Rafael J. Wysocki" <rjw@xxxxxxx>
Re: 2.6.34-rc5: Reported regressions from 2.6.33
From
: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
2.6.34-rc5: Reported regressions from 2.6.33
From
: "Rafael J. Wysocki" <rjw@xxxxxxx>
Re: [PATCH v2] compat: backport convert multicast list to list_head.
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: iwlagn unexpected AddBA Req
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Hin-Tak Leung <hintak.leung@xxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Till Kamppeter <till.kamppeter@xxxxxxxxx>
Re: Google Summer of Code 2010 - Please resolve duplicates
From
: Greg KH <greg@xxxxxxxxx>
[PATCH v2 1/3] compat-wireless: backport convert multicast list to list_head.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH v2] compat: backport convert multicast list to list_head.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
Google Summer of Code 2010 - Please resolve duplicates
From
: Till Kamppeter <till.kamppeter@xxxxxxxxx>
Re: [PATCH v2 1/9] ath9k: check for specific rx stuck conditions and recover from them
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH v2 1/9] ath9k: check for specific rx stuck conditions and recover from them
From
: Pavel Roskin <proski@xxxxxxx>
Re: [PATCH 1/3] compat-wireless: backport convert multicast list to list_head.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
Re: rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 6/9] ath9k: initialize the number of tx/rx streams correctly
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 3/9] ath9k: update the MCS mask for MCS16 and above
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 8/9] ath9k: add support for Tx and Rx STBC
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 2/9] ath9k: clean up tx buffer handling
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 4/9] ath9k: update the ath_max_4ms_framelen table
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 1/9] ath9k: check for specific rx stuck conditions and recover from them
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 5/9] ath9k: reduce the bits_per_symbol table size, support more streams
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2 9/9] ath9k: set the STBC flag in rate control if the peer supports it
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Richard Zidlicky <rz@xxxxxxxxxxxxxx>
Re: iwlagn unexpected AddBA Req
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
[PATCH] mac80211: pass HT changes to driver when off channel
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Re: rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Richard Zidlicky <rz@xxxxxxxxxxxxxx>
Re: Request for releasing b43-fwcutter
From
: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Pavel Roskin <proski@xxxxxxx>
Re: [rt2x00] rt3070 fails to initialize with rt2800usb
From
: Ivo van Doorn <ivdoorn@xxxxxxxxx>
Re: [rt2x00] rt3070 fails to initialize with rt2800usb
From
: Walter <goldenstranger@xxxxxxxxx>
Re: [PATCH] mac80211: document IEEE80211_CONF_CHANGE_QoS
From
: Pavel Roskin <proski@xxxxxxx>
Re: Request for releasing b43-fwcutter
From
: Michael Buesch <mb@xxxxxxxxx>
Re: [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque
From
: Pavel Roskin <proski@xxxxxxx>
[PATCH] ath9k-htc: speedup disconnect handling
From
: tom.leiming@xxxxxxxxx
Re: b43 'hardware blocked' but only keyboard/led touch button
From
: Matthew Garrett <mjg@xxxxxxxxxx>
Re: b43 'hardware blocked' but only keyboard/led touch button
From
: Philippe De Muyter <phdm@xxxxxxxxx>
Request for releasing b43-fwcutter
From
: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: b43 'hardware blocked' but only keyboard/led touch button
From
: Matthew Garrett <mjg@xxxxxxxxxx>
Re: [RFC PATCHv3 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [RFC PATCHv3 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 8/9] ath9k: add support for Tx and Rx STBC
From
: Felix Fietkau <nbd@xxxxxxxx>
Re: [PATCH 8/9] ath9k: add support for Tx and Rx STBC
From
: Björn Smedman <bjorn.smedman@xxxxxxxxxxx>
Re: b43 'hardware blocked' but only keyboard/led touch button
From
: Philippe De Muyter <phdm@xxxxxxxxx>
Re: [PATCH] mac80211: fix stopping RX BA session from timer
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] ath5k: Use high bitrates for ACK/CTS
From
: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: identify Allwin devices
From
: Ivo van Doorn <ivdoorn@xxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: delete Allwin devices
From
: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
[PATCH] wireless: rt2x00: rt2800usb: identify Allwin devices
From
: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
[PATCH] mac80211: document IEEE80211_CONF_CHANGE_QoS
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[RFC] mac80211: allow creating/destroying agg sessions from debugfs
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
[PATCH] mac80211: add missing newline
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [RFC] mac80211: sample survey implementation for mac80211 & hwsim
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
[PATCH] mac80211: fix stopping RX BA session from timer
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [RFC] mac80211: sample survey implementation for mac80211 & hwsim
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
[PATCH 2.6.34] mac80211: remove bogus TX agg state assignment
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH] ath5k: basic support for survey
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
[RFC] mac80211: sample survey implementation for mac80211 & hwsim
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
[RFC 2/5] orinoco: allow driver to specify netdev_ops
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[RFC 5/5] orinoco_usb: avoid in_atomic
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[RFC 4/5] orinoco: add orinoco_usb driver
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[RFC 3/5] orinoco: encapsulate driver locking
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[RFC 1/5] orinoco: add hermes_ops
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[RFC 0/5] orinoco: Add support for Agere based USB cards
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
Re: regression: soft lockup with ath9k on master-2010-04-14
From
: Kalle Valo <kvalo@xxxxxxxxxx>
[PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[PATCH 3/3] orinoco: have sparse check endian issues
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[PATCH 2/3] orinoco: use cfg80211_find_ie
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
[PATCH 1/3] orinoco: implement set_wiphy_params
From
: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
Re: regression: soft lockup with ath9k on master-2010-04-14
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: regression: soft lockup with ath9k on master-2010-04-14
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [RFC PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [RFC PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [PATCH 1/2] ath5k: Use high bitrates for ACK/CTS
From
: Bruno Randolf <br1@xxxxxxxxxxx>
Re: 3dsp shared a USB Wifi Dongle Source Code
From
: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
3dsp shared a USB Wifi Dongle Source Code
From
: João Neto <joao.gsneto@xxxxxxxxx>
[PATCH] mac80211: fix typo in comments
From
: Daniel Halperin <dhalperi@xxxxxxxxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 5/9] ath9k: reduce the bits_per_symbol table size, support more streams
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 8/9] ath9k: add support for Tx and Rx STBC
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 2/9] ath9k: clean up tx buffer handling
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
[PATCH 3/9] ath9k: update the MCS mask for MCS16 and above
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 1/9] ath9k: check for specific rx stuck conditions and recover from them
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 4/9] ath9k: update the ath_max_4ms_framelen table
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 6/9] ath9k: initialize the number of tx/rx streams correctly
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 7/9] mac80211: add flags for STBC (Space-Time Block Coding)
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH 9/9] ath9k: set the STBC flag in rate control if the peer supports it
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH 1/3] compat-wireless: backport convert multicast list to list_head.
From
: Pavel Roskin <proski@xxxxxxx>
[PATCH 2/2] compat: Add linux/version.h include before using it.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 1/2] compat: Add definitions needed for libertas sdio driver.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 0/2] compat-wireless: compile fixes
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 3/3] compat-wireless: include net and trace includes form compat.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 1/3] compat-wireless: backport convert multicast list to list_head.
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 2/3] compat-wireless: Remove use of sdio quirks attribute
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
[PATCH 0/3] compat-wireless: compile fixes
From
: Hauke Mehrtens <hauke@xxxxxxxxxx>
rc80211_minstrel.c:70 WARNING with 2.6.34-rc4
From
: Richard Zidlicky <rz@xxxxxxxxxxxxxx>
Re: [ath5k-devel] [PATCH] ath5k/ath9k: Fix 64 bits TSF reads
From
: Pavel Roskin <proski@xxxxxxx>
Re: [ath5k-devel] [PATCH] ath5k/ath9k: Fix 64 bits TSF reads
From
: Derek Smithies <derek@xxxxxxxxxxxxxx>
iwl3945: Error sending REPLY_{RXON|SCAN_CMD|TX_PWR_TABLE_CMD} time out after 500ms
From
: Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx>
Re: [ath5k-devel] [PATCH] ath5k/ath9k: Fix 64 bits TSF reads
From
: Benoit PAPILLAULT <benoit.papillault@xxxxxxx>
Re: [rt2x00] rt3070 fails to initialize with rt2800usb
From
: Ivo van Doorn <ivdoorn@xxxxxxxxx>
Re: [rt2x00] rt3070 fails to initialize with rt2800usb
From
: Walter <goldenstranger@xxxxxxxxx>
Re: [rt2x00] rt3070 fails to initialize with rt2800usb
From
: Ivo van Doorn <ivdoorn@xxxxxxxxx>
[rt2x00] rt3070 fails to initialize with rt2800usb
From
: Walter <goldenstranger@xxxxxxxxx>
Re: [PATCH] wl1251: add support for dedicated IRQ line
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: [PATCH v2 resend 1/3] mac80211: explicitly disable/enable QoS
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] iwmc3200wifi: check sparse endianness annotations
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Resolved, was Re: Problem: Regression with iwl 4965 since 2.6.32.10
From
: U Kuehn <ukuehn@xxxxxxx>
Re: [PATCH] wl1251: add support for dedicated IRQ line
From
: Kalle Valo <kvalo@xxxxxxxxxx>
IRQ debugging with ath9k
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: compat-wireless doesn't compile against 2.6.32 on Ubuntu beta
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [zd1211-devs] timeout in zd1211rw with zotac mini-itx (geforce 9300)
From
: Tsuwei Chen <tsuwei@xxxxxxxxx>
Re: [zd1211-devs] timeout in zd1211rw with zotac mini-itx (geforce 9300)
From
: Hin-Tak Leung <hintak_leung@xxxxxxxxxxx>
Re: Compiling ar9170 on 2.6.30
From
: Pavel Roskin <proski@xxxxxxx>
Re: [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque
From
: Pavel Roskin <proski@xxxxxxx>
[PATCH 02/21] iwlwifi: remove scan_bands logic
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 09/21] iwlwifi: bring up 6000 Series 2x2 AGN Gen2 adapters
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 03/21] iwlwifi: correct atomic bitops usage
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 04/21] iwlwifi: remove next_scan_jiffies
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 05/21] iwlwifi: remove scan_pass_start
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 10/21] iwlwifi: remove duplicated debug functions
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 11/21] iwlwifi: add debugfs ops to iwlwifi
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 14/21] iwlwifi: PA type for 6000g2 series
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 17/21] iwlwifi: make BT coex config a virtual method
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 12/21] iwlwifi: remove redundant iwl_dump_lq_cmd()
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 18/21] iwlwifi: rename TX_CMD_FLG_BT_DIS_MSK
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 19/21] iwlwifi: don't check monitor for scanning
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 07/21] iwlwifi: trigger scan synchronously
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 13/21] iwlwifi: add hw revision for 6000g2 NIC
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 15/21] iwlwifi: sanity check for turn on aggregation tid
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 21/21] iwlwifi: make scan antenna forcing more generic
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 20/21] iwlwifi: remove monitor check
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 16/21] iwlwifi: more code clean up for agn devices
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 08/21] iwlwifi: more generic eeprom defines
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 06/21] iwlwifi: rename priv->scan to priv->scan_cmd
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 01/21] iwlwifi: set correct single/dual stream mask
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 00/21] iwlwifi updates for 2.6.35
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 2/2] iwlwifi: correct 6000 EEPROM regulatory address
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 1/2] iwlwifi: fix scan races
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
[PATCH 0/2] iwlwifi fixes for 2.6.34
From
: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Re: compat-wireless doesn't compile against 2.6.32 on Ubuntu beta
From
: Pavel Roskin <proski@xxxxxxx>
Re: [PATCH 2/2] iwmc3200wifi: check sparse endianness annotations
From
: Pavel Roskin <proski@xxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: delete Allwin devices
From
: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Re: [ath5k-devel] [PATCH] ath5k/ath9k: Fix 64 bits TSF reads
From
: Pavel Roskin <proski@xxxxxxx>
Re: [PATCH 2/2] iwmc3200wifi: check sparse endianness annotations
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] iwmc3200wifi: check sparse endianness annotations
From
: Pavel Roskin <proski@xxxxxxx>
Re: timeout in zd1211rw with zotac mini-itx (geforce 9300)
From
: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
timeout in zd1211rw with zotac mini-itx (geforce 9300)
From
: Tsuwei Chen <tsuwei@xxxxxxxxx>
Re: [RFC PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: 2.6.33 iwl5350 firmware crash
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
RE: Power consumption on 802.11 / ASPM / device measurements
From
: David Quan <David.Quan@xxxxxxxxxxx>
Re: [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Power consumption on 802.11 / ASPM / device measurements
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [ath9k_htc] Current patches against 2.6.34-rc3-git4
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: Survey mode
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: Survey mode
From
: Holger Schurig <holgerschurig@xxxxxxxxxxxxxx>
Re: 2.6.33 iwl5350 firmware crash
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
Re: [ath9k_htc] Current patches against 2.6.34-rc3-git4
From
: Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx>
Re: [PATCH] iwlwifi: initialize iwl_wimax_coex_cmd.flags
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
Re: [PATCH] iwlwifi: check scan request ie_len
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
Re: [PATCH PING] ssb patches for SPROM location
From
: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Re: [PATCH PING] ssb patches for SPROM location
From
: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [PATCH 1/2] ath5k: Use high bitrates for ACK/CTS
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
[PATCH] iwlwifi: initialize iwl_wimax_coex_cmd.flags
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
[PATCH] iwlwifi: check scan request ie_len
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: delete Allwin devices
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [PATCH PING] ssb patches for SPROM location
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [RFC PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [PATCH] wl1251: add support for dedicated IRQ line
From
: Bob Copeland <me@xxxxxxxxxxxxxxx>
Re: [ath9k-devel] [RFC][PATCH 2/6] ath9k: do not mark frames with RXKEY_IX_INVALID as decrypted
From
: Jouni Malinen <jouni.malinen@xxxxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: delete Allwin devices
From
: Ivo Van Doorn <ivdoorn@xxxxxxxxx>
[RFC][PATCH 6/6] ath9k: clear mic error flag on encrypted frames
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 5/6] ath9k: check error flags even if rx frame is marked ok
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 4/6] ath9k: do not mark frames with RX_KEY_MISS as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 3/6] ath9k: do not mark frames with RX_DECRYPT_BUSY as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 2/6] ath9k: do not mark frames with RXKEY_IX_INVALID as decrypted
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[RFC][PATCH 1/6] ath9k: clean up rx skb post-process logic
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
ath9k: corrupt frames forwarded to mac80211 as decrypted (was: ath9k: receive stops working in AP-mode and 802.11n)
From
: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
[PATCH] wl1251: add support for dedicated IRQ line
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
[PATCH] wireless: rt2x00: rt2800usb: delete Allwin devices
From
: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
[RFC PATCHv3 0/2] mac80211: cfg80211: dynamic ps timeout based on pm-qos
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCHv3 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCHv3 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCH] mac80211: Prevent running sta_cleanup timer unnecessarily
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCH] mac80211: sta_cleanup timer handling
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: Survey mode volunteers
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
Re: Survey mode volunteers
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
[PATCH 10/10] ath9k_htc: Fix sparse endian warnings
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 07/10] ath9k_htc: Remove GPIO set on unload
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 09/10] ath9k_htc: Handle WMI timeouts properly
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 08/10] ath9k_htc: Add dropped SKB count to debugfs
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 06/10] ath9k_hw: Use buffered register writes
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 04/10] ath9k_hw: Add macros for multiple register writes
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 05/10] ath9k_hw: Relocate Opmode initialization
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 03/10] ath9k_htc: Implement multiple register write support
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 02/10] ath: Add buffered register write operations
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 01/10] ath9k_htc: Cleanup beacon configuration
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 00/10] ath9k_htc updates
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
Re: [RFC PATCHv2 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[PATCH PING] ssb patches for SPROM location
From
: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [RFC PATCHv2 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [RFC PATCHv2 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCHv2 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH v2] wl1251: register platform_device to pass board data
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [ath9k-devel] On ath9k debugfs, having trouble recompiling and inserting only ath9k
From
: Rakesh Kumar <gopchandani@xxxxxxxxx>
[PATCH 2/2] iwmc3200wifi: check sparse endianness annotations
From
: Zhu Yi <yi.zhu@xxxxxxxxx>
[PATCH 1/2] iwmc3200wifi: Fix sparse warnings
From
: Zhu Yi <yi.zhu@xxxxxxxxx>
Re: Lockup inside of stop_machine() during modprobe aes (was Re: Another AR5008 hang)
From
: Ben Gamari <bgamari.foss@xxxxxxxxx>
Re: Lockup inside of stop_machine() during modprobe aes (was Re: Another AR5008 hang)
From
: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
[PATCH] ath5k/ath9k: Fix 64 bits TSF reads
From
: Benoit Papillault <benoit.papillault@xxxxxxx>
[PATCH v3 00/97] ath9k: add AR9003 support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 08/97] ath9k_hw: remove wrapper ath9k_hw_write_regs()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 10/97] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 12/97] ath9k_hw: add a private callback for PLL control computation
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 18/97] ath9k: disable the MIB interrupt if ANI is disabled
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 14/97] ath9k_hw: Add AR9003 PHY support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 15/97] ath9k_hw: move init config and default after chip is up
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 17/97] ath9k_hw: disable ANI for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 32/97] ath9k_hw: add initvals for the AR9003 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 40/97] ath9k: Use memcpy in ath_clone_txbuf()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 39/97] ath9k: Use abstraction to get link pointer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 38/97] ath9k_hw: Add abstraction to set/get link pointer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 31/97] ath9k_hw: split initvals.h by hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 43/97] ath9k: Add Rx EDMA support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 44/97] ath9k_hw: Split out the function for reading the noise floor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 48/97] ath9k_hw: rename PA calib for AR9287
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 47/97] ath9k_hw: add a helper for the OLC tem compensation for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 49/97] ath9k_hw: shift code for AR9280 OLC temp comp
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 51/97] ath9k_hw: simplify OLC temp compensation for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 52/97] ath9k_hw: rename the PA calib routines to match their families
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 55/97] ath9k_hw: split calib code by hardware families
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 54/97] ath9k_hw: move the cal AR9100 calibration settings
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 62/97] ath9k_hw: Initialize interrupt mask for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 58/97] ath9k_hw: split the generic hardware code by hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 68/97] ath9k_hw: restore mac address reading logic
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 64/97] ath9k_hw: abstract loading noisefloor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 66/97] ath9k_hw: complete AR9003 calibration
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 70/97] ath9k_hw: add OFDM spur mitigation for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 61/97] ath9k_hw: Abstract the routine which returns interrupt status
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 69/97] ath9k_hw: Implement AR9003 eeprom callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 75/97] ath9k_hw: add the AR9300 SREV hw name print
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 74/97] ath9k_hw: Configure Tx interrupt mitigation timer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 71/97] ath9k_hw: Fill get_isr() for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 82/97] ath9k_hw: Add function to configure tx status ring buffer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 78/97] ath9k_hw: skip asynch fifo enablement to AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 81/97] ath9k_hw: Define abstraction for tx desc access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 86/97] ath9k_hw: enable CRC check of descriptors for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 84/97] ath9k_hw: Fill descriptor abstrations for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 83/97] ath9k_hw: move AR9002 mac ops to its own file
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 85/97] ath9k: add RXLP and RXHP to debugfs counters
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 89/97] ath9k: Initialize and configure tx status for EDMA
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 87/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 88/97] ath9k: Setup appropriate tx desc for regular dma and edma
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 90/97] ath9k_hw: Compute pointer checksum over the link descriptor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 92/97] mac80211: add LDPC control flag
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 97/97] ath9k_hw: add the PCI ID for the first AR9300 device
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 94/97] ath9k: add LDPC support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 93/97] ath9k_hw: add LDPC support for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 91/97] ath9k: Add Tx EDMA support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 33/97] ath9k_hw: add helpers for processing the AR9003 INI
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 36/97] ath9k_hw: Define tx control struct for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 35/97] ath9k_hw: add all the AR9003 PHY callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 24/97] ath9k_hw: update the chip tests for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 29/97] ath9k_hw: Implement PLL control on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 21/97] ath9k_hw: Add abstraction for rx enable
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 20/97] ath9k_hw: Fill few hw cap for edma
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 23/97] ath9k_hw: Add few routines for rx edma support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 26/97] ath9k_hw: Add AR9003 PHY register definitions
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 30/97] ath9k_hw: Implement spur mitigation on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 28/97] ath9k_hw: Set the channel on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 27/97] ath9k_hw: add common channel select helpers for ar900[23]
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 34/97] ath9k_hw: Split off ANI control to the PHY ops
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 04/97] ath9k_hw: fix a missing hex prefix for a register mask
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 06/97] ath9k_hw: add support for GPIO differences on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 02/97] ath9k_hw: add silicon revision macros for AR9300
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v3 03/97] ath9k_hw: add a macro for abstracting generic timer access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: pull request: wireless-next-2.6 2010-04-15
From
: David Miller <davem@xxxxxxxxxxxxx>
Re: pull request: wireless-2.6 2010-04-15
From
: David Miller <davem@xxxxxxxxxxxxx>
2.6.33 iwl5350 firmware crash
From
: Andrew Lutomirski <luto@xxxxxxx>
pull request: wireless-next-2.6 2010-04-15
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
[PATCH 2/2] libertas: Davinci platforms need more time loading helper firmware
From
: Dan Williams <dcbw@xxxxxxxxxx>
Compiling ar9170 on 2.6.30
From
: Eric Siegel <nticompass@xxxxxxxxx>
[PATCH 1/2] libertas: consolidate SDIO firmware wait code
From
: Dan Williams <dcbw@xxxxxxxxxx>
pull request: wireless-2.6 2010-04-15
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: regression: soft lockup with ath9k on master-2010-04-14
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
regression: soft lockup with ath9k on master-2010-04-14
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] rtl818x: Move configuration details to the rtl818x directory
From
: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Re: [PATCH] rtl818x: Move configuration details to the rtl818x directory
From
: Hin-Tak Leung <hintak.leung@xxxxxxxxx>
[no subject]
From
: Tomasz Trocki <tomasz@xxxxxxxxxx>
[PATCH] rtl818x: Move configuration details to the rtl818x directory
From
: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
iwl3945: Network dropouts w/ flash-stream in firefox
From
: Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx>
compat-wireless doesn't compile against 2.6.32 on Ubuntu beta
From
: Andrey Semyonov <gatekeeper.mail@xxxxxxxxx>
Re: [PATCH v2 00/97] ath9k: add AR9003 support
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
[PATCH v2] wl1251: register platform_device to pass board data
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: [PATCH v2 resend 1/3] mac80211: explicitly disable/enable QoS
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
[PATCH v2 resend 2/3] iwlwifi: manage QoS by mac stack
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
[PATCH v2 resend 1/3] mac80211: explicitly disable/enable QoS
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
[PATCH v2 resend 3/3] mac80211: enable QoS explicitly in AP mode
From
: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
[PATCH] p54pci: fix serious sparse warning
From
: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: identify Hawking devices
From
: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
[PATCH] wireless: rt2x00: rt2800usb: identify Hawking devices
From
: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
RE: Survey mode volunteers
From
: Anton Puolakka <Anton.Puolakka@xxxxxxxxxxx>
[PATCH 2/2] rt2x00: rt2800pci: fix tx path by not accessing the skb after it was DMA mapped
From
: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
[PATCH 1/2] rt2x00: add txdesc parameter to write_tx_data
From
: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
[PATCH 1/6] ath9k_htc: Cleanup beacon configuration
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 6/6] ath9k_hw: Use buffered register writes
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 5/6] ath9k_hw: Relocate Opmode initialization
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 4/6] ath9k_hw: Add macros for multiple register writes
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 3/6] ath9k_htc: Implement multiple register write support
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 2/6] ath: Add buffered register write operations
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
[PATCH 1/6] ath9k_htc: Cleanup beacon configuration
From
: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
Re: [PATCH v2] wl1251: read default MAC address from EEPROM when available
From
: Kalle Valo <kvalo@xxxxxxxxxx>
[PATCH v2] cfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body
From
: Nishant Sarmukadam <nishants@xxxxxxxxxxx>
Re: [PATCH v2 00/97] ath9k: add AR9003 support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 14/97] ath9k_hw: Add AR9003 PHY support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 08/97] ath9k_hw: remove wrapper ath9k_hw_write_regs()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 10/97] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 01/97] ath9k_hw: start building an abstraction layer for hardware routines
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 00/97] ath9k: add AR9003 support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 23/97] ath9k_hw: Add few routines for rx edma support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 24/97] ath9k_hw: update the chip tests for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 33/97] ath9k_hw: add helpers for processing the AR9003 INI
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 26/97] ath9k_hw: Add AR9003 PHY register definitions
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 12/97] ath9k_hw: add a private callback for PLL control computation
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 32/97] ath9k_hw: add initvals for the AR9003 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 34/97] ath9k_hw: Split off ANI control to the PHY ops
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 36/97] ath9k_hw: Define tx control struct for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 35/97] ath9k_hw: add all the AR9003 PHY callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 38/97] ath9k_hw: Add abstraction to set/get link pointer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 39/97] ath9k: Use abstraction to get link pointer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 40/97] ath9k: Use memcpy in ath_clone_txbuf()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 31/97] ath9k_hw: split initvals.h by hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 42/97] ath9k: Make bf_desc of ath_buf opaque
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 47/97] ath9k_hw: add a helper for the OLC tem compensation for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 43/97] ath9k: Add Rx EDMA support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 44/97] ath9k_hw: Split out the function for reading the noise floor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 48/97] ath9k_hw: rename PA calib for AR9287
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 49/97] ath9k_hw: shift code for AR9280 OLC temp comp
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 51/97] ath9k_hw: simplify OLC temp compensation for AR9002
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 52/97] ath9k_hw: rename the PA calib routines to match their families
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 54/97] ath9k_hw: move the cal AR9100 calibration settings
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 58/97] ath9k_hw: split the generic hardware code by hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 61/97] ath9k_hw: Abstract the routine which returns interrupt status
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 64/97] ath9k_hw: abstract loading noisefloor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 70/97] ath9k_hw: add OFDM spur mitigation for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 71/97] ath9k_hw: Fill get_isr() for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 66/97] ath9k_hw: complete AR9003 calibration
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 68/97] ath9k_hw: restore mac address reading logic
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 69/97] ath9k_hw: Implement AR9003 eeprom callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 75/97] ath9k_hw: add the AR9300 SREV hw name print
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 74/97] ath9k_hw: Configure Tx interrupt mitigation timer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 78/97] ath9k_hw: skip asynch fifo enablement to AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 84/97] ath9k: add RXLP and RXHP to debugfs counters
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 83/97] ath9k_hw: Fill descriptor abstrations for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 82/97] ath9k_hw: Add function to configure tx status ring buffer
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 81/97] ath9k_hw: Define abstraction for tx desc access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 85/97] ath9k_hw: enable CRC check of descriptors for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 89/97] ath9k: Initialize and configure tx status for EDMA
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 86/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 87/97] ath9k_hw: move AR9002 mac ops to its own file
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 90/97] ath9k_hw: Compute pointer checksum over the link descriptor
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 88/97] ath9k: Setup appropriate tx desc for regular dma and edma
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 92/97] mac80211: add LDPC control flag
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 91/97] ath9k: Add Tx EDMA support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 93/97] ath9k_hw: add LDPC support for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 94/97] ath9k: add LDPC support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 20/97] ath9k_hw: Fill few hw cap for edma
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 97/97] ath9k_hw: add the PCI ID for the first AR9300 device
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 15/97] ath9k_hw: move init config and default after chip is up
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 21/97] ath9k_hw: Add abstraction for rx enable
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 18/97] ath9k: disable the MIB interrupt if ANI is disabled
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 17/97] ath9k_hw: disable ANI for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 55/97] ath9k_hw: split calib code by hardware families
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 62/97] ath9k_hw: Initialize interrupt mask for AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 27/97] ath9k_hw: add common channel select helpers for ar900[23]
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 09/97] ath9k_hw: Move some RF ops to the private callbacks
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 28/97] ath9k_hw: Set the channel on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 29/97] ath9k_hw: Implement PLL control on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 30/97] ath9k_hw: Implement spur mitigation on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 06/97] ath9k_hw: add support for GPIO differences on AR9003
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 02/97] ath9k_hw: add silicon revision macros for AR9300
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 04/97] ath9k_hw: fix a missing hex prefix for a register mask
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCH v2 03/97] ath9k_hw: add a macro for abstracting generic timer access
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
compat wireless doesn't compile
From
: Andrey Semyonov <gatekeeper.mail@xxxxxxxxx>
Re: [PATCH v2] cfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: Survey mode volunteers
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: [PATCH] wireless: rt2x00: rt2800usb: identify Sitecom devices
From
: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
[PATCH] wireless: rt2x00: rt2800usb: identify Sitecom devices
From
: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
[PATCH v2] wl1251: read default MAC address from EEPROM when available
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: Survey mode volunteers
From
: Holger Schurig <holgerschurig@xxxxxxxxx>
Re: [PATCH] wl1251: read default MAC address from EEPROM when available
From
: Kalle Valo <kvalo@xxxxxxxxxx>
[RFC PATCHv2 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCHv2 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCHv2 0/2] mac80211: cfg80211: dynamic ps timeout based on pm-qos
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCH 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCH 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Julian Calaby <julian.calaby@xxxxxxxxx>
[RFC PATCH 0/2] mac80211: cfg80211: dynamic ps timeout based on pm-qos
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCH 2/2] cfg80211: Remove default dynamic PS timeout value
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
[RFC PATCH 1/2] mac80211: Determine dynamic PS timeout based on ps-qos network latency
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [PATCH] wl1251: register platform_device to pass board data
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: Problem: Regression with iwl 4965 since 2.6.32.10
From
: reinette chatre <reinette.chatre@xxxxxxxxx>
Re: [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: [PATCH] wl1251: read default MAC address from EEPROM when available
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH 000/102] ath9k: add AR9003 support
From
: Felix Fietkau <nbd@xxxxxxxxxxx>
Re: [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [PATCH 000/102] ath9k: add AR9003 support
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: Bug report: Controller RESET (DMA error) long after connecting
From
: Ferdinand Rau <RauFerd@xxxxxx>
Re: [PATCH] wl1251: register platform_device to pass board data
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] wl1251: register platform_device to pass board data
From
: Bob Copeland <me@xxxxxxxxxxxxxxx>
Re: p54pci does not work
From
: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Re: [PATCH] wl1251: don't require NVS data when EEPROM is used
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] wl1251: read default MAC address from EEPROM when available
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] wl1251: register platform_device to pass board data
From
: Kalle Valo <kvalo@xxxxxxxxxx>
[PATCH] ar9170usb: add a couple more USB IDs
From
: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Re: [PATCH v2] cfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH] libertas/sdio: 8686: set ECSI bit for 1-bit transfers
From
: Daniel Mack <daniel@xxxxxxxx>
Re: [PATCH] libertas/sdio: 8686: set ECSI bit for 1-bit transfers
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Re: Bug report: Controller RESET (DMA error) long after connecting
From
: "John W. Linville" <linville@xxxxxxxxxxxxx>
Bug report: Controller RESET (DMA error) long after connecting
From
: Ferdinand Rau <RauFerd@xxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] libertas/sdio: 8686: set ECSI bit for 1-bit transfers
From
: Daniel Mack <daniel@xxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [PATCH] cfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
From
: Bruno Randolf <br1@xxxxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
From
: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
[PATCH] ath9k: Group Key fix for VAPs
From
: Daniel Yingqiang Ma <yma.cool@xxxxxxxxx>
p54pci does not work
From
: Duarte Nuno Gomes <dnunogomes@xxxxxxxxx>
Re: Compat-wireless for 2.6.34 - 802.11 and bluetooth backported
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Compat-wireless for 2.6.34 - 802.11 and bluetooth backported
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
From
: Bruno Randolf <br1@xxxxxxxxxxx>
[PATCH] wl1251: don't require NVS data when EEPROM is used
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
[PATCH] wl1251: read default MAC address from EEPROM when available
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
[PATCH] wl1251: register platform_device to pass board data
From
: Grazvydas Ignotas <notasas@xxxxxxxxx>
Re: ath9k compilation error
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [ath9k-devel] On ath9k debugfs, having trouble recompiling and inserting only ath9k
From
: Pavel Roskin <proski@xxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
From
: Kalle Valo <kvalo@xxxxxxxxxx>
Re: ath9k compilation error
From
: Torquil Macdonald Sørensen <torquil@xxxxxxxxx>
Re: [PATCH 000/102] ath9k: add AR9003 support
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: ath9k compilation error
From
: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
Re: [PATCH] compat: add rcu_dereference_check
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
Re: Survey mode volunteers
From
: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
[PATCHv2 4/4] ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device
From
: tom.leiming@xxxxxxxxx
[PATCHv2 3/4] ath9k-htc:respect usb buffer cacheline alignment in reg out path
From
: tom.leiming@xxxxxxxxx
[PATCHv2 2/4] ath9k-htc:respect usb buffer cacheline alignment in reg in path
From
: tom.leiming@xxxxxxxxx
[PATCHv2 1/4] ath9k-htc:respect usb buffer cacheline alignment in ath9k_hif_usb_alloc_rx_urbs
From
: tom.leiming@xxxxxxxxx
[Index of Archives]
[Linux Host AP]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]
