Search Linux Wireless

[PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The AR9002 hardware code enables aggregation for WEP but
mac80211 doesn't enable aggregation with WEP, and the AR9003
code family does not need this so skip it for now for AR9003
but leave the code and annotate we should eventually consider
how to remove this in consideration for the HAL unification
goals.

Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/ar9002_hw.c |   12 ++++++++++++
 drivers/net/wireless/ath/ath9k/hw.c        |    7 ++-----
 drivers/net/wireless/ath/ath9k/hw.h        |    1 +
 3 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index cf36f64..17b98a3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -555,6 +555,18 @@ void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
 	}
 }
 
+/*
+ * We don't enable WEP aggregation on mac80211 but we keep this
+ * around for HAL unification purposes.
+ */
+void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah)
+{
+	if (AR_SREV_9287_12_OR_LATER(ah)) {
+		REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
+				AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
+	}
+}
+
 /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
 void ar9002_hw_attach_ops(struct ath_hw *ah)
 {
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ab223c6..5260c43 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1266,12 +1266,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	ath9k_hw_init_global_settings(ah);
 
-	if (!AR_SREV_9300_20_OR_LATER(ah))
+	if (!AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9002_hw_enable_async_fifo(ah);
-
-	if (AR_SREV_9287_12_OR_LATER(ah)) {
-		REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
-				AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
+		ar9002_hw_enable_wep_aggregation(ah);
 	}
 
 	REG_WRITE(ah, AR_STA_ID1,
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e4eacdd..affb848 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -851,6 +851,7 @@ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
 void ar9002_hw_cck_chan14_spread(struct ath_hw *ah);
 int ar9002_hw_rf_claim(struct ath_hw *ah);
 void ar9002_hw_enable_async_fifo(struct ath_hw *ah);
+void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah);
 
 /*
  * Code specifric to AR9003, we stuff these here to avoid callbacks
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux