On Saturday 17 April 2010, Walter wrote: > I've been monitoring the community's work for the rt3070 chips and especially your recent success towards improving the driver. > > I would like to share something with the rt2x00 development team which may or may not be known. > > The rt3070 card I own fails to initialize with the latest (working) compat-wireless release. When I plug the USB card, rt2800usb doesn't automatically load and when I manually modprobe the driver it does not recognize it as well. > > Looking in to the rt2800usb.c file I found the 'problem'. The VIDs aren't properly set. Mine shows 148f:3070. Although a line is included in the "#ifdef CONFIG_RT2800USB_RT30XX", the module won't initialize the card. > > I fixed the problem by adding my device here: > > /* Ralink */ > { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, > { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, > /* Samsung */ > > which now looks like: > > /* Ralink */ > { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, > { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, > { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, > /* Samsung */ > > This pertains to the rt3071 as well. That USB ID is already known, did you compile the driver with support for CONFIG_RT2800USB_RT30XX enabled? Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html