[Prev Page][Next Page]
- Good work on driver for iw5300agn
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: Frame aggregation size configuration in 802.11n
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 1/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in ath9k_hif_usb_alloc_rx_urbs
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH 3/3] ath9k-htc: pass cacheline aligned buffer to usb hcd in register out path
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: Frame aggregation size configuration in 802.11n
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Frame aggregation size configuration in 802.11n
- From: Sneha Aggarwal <snehaatpec@xxxxxxxxx>
- AR9170 Wifi USB module driver on powerpc
- From: WATY Sébastien <pi16-03@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Google Summer of Code 2010 - Assigned all unassigned kernel applications to Grant Likely
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- Re: Google Summer of Code 2010 - Assigned all unassigned kernel applications to Grant Likely
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- ath9k compilation error
- From: Torquil Macdonald Sørensen <torquil@xxxxxxxxx>
- Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
- From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
- Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
- From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: Google Summer of Code 2010 - Assigned all unassigned kernel applications to Grant Likely
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- [RFC PATCH] nl80211: Add support for dynamic ps timeout configuration
- From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: Google Summer of Code 2010 - Assigned all unassigned kernel applications to Grant Likely
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mac80211: Use G mandatory rates in 2GHz band
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 2/2] ath5k: treat RXORN as non-fatal
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- [PATCH 1/2] ath5k: Use high bitrates for ACK/CTS
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- [PATCH 2/2] mac80211: Initialize IBSS basic rates according to band
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- [PATCH 1/2] mac80211: Use G mandatory rates in 2GHz band
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- [PATCH 3/3] ath9k-htc: pass cacheline aligned buffer to usb hcd in register out path
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 1/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in ath9k_hif_usb_alloc_rx_urbs
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [ath9k-devel] ath9k/mac80211 and 802.11n in IBSS mode
- From: Holger Schurig <holgerschurig@xxxxxxxxx>
- On ath9k debugfs, having trouble recompiling and inserting only ath9k
- From: Rakesh Kumar <gopchandani@xxxxxxxxx>
- Google Summer of Code 2010 - Assigned all unassigned kernel applications to Grant Likely
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- rtl8185 regression in 2.6.34-rc3 + git vs 2.6.33
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- ath: timeout on reg 0x9860
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
- Re: [PATCH 7/9] rt2x00: Add rt3071 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Refactor rt2800 version constants.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [REGRESSION] Lockup inside of stop_machine() during modprobe aes (was Re: Another AR5008 hang)
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
- Re: [PATCH 1/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in ath9k_hif_usb_alloc_rx_urbs
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 9/9] rt2x00: Add rt3390 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 7/9] rt2x00: Add rt3071 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 2/9] rt2x00: Update rt2800 register definitions towards latest definitions.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 8/9] rt2x00: Add rt3090 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 4/9] rt2x00: Refactor rt2800 version constants.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 1/9] rt2x00: Let RF chipset decide the RF channel switch method to use in rt2800.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH v2 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Hello
- From: Liu <tai@xxxxxxxxxxx>
- Hello
- From: Liu <tai@xxxxxxxxxxx>
- Hello
- From: Liu <tai@xxxxxxxxxxx>
- [PATCH] ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 3/3] ath9k-htc: pass cacheline aligned buffer to usb hcd in register out path
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 1/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in ath9k_hif_usb_alloc_rx_urbs
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 7/9] rt2x00: Add rt3071 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Google Summer of Code 2010 - CORRECTION: Only organization admin can assign, so please PROPOSE being a mentor for a student
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- Re: [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
- Google Summer of Code 2010 - Please ASSIGN (not propose) mentors to the students
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- [PATCH] ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device
- From: tom.leiming@xxxxxxxxx
- [PATCH 3/3] ath9k-htc: pass cacheline aligned buffer to usb hcd in register out path
- From: tom.leiming@xxxxxxxxx
- [PATCH 2/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in reg in path
- From: tom.leiming@xxxxxxxxx
- [PATCH 1/3] ath9k-htc: replace __dev_alloc_skb with alloc_skb in ath9k_hif_usb_alloc_rx_urbs
- From: tom.leiming@xxxxxxxxx
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Julian Calaby <julian.calaby@xxxxxxxxx>
- Re: Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Thomas Bächler <thomas@xxxxxxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Problem: Regression with iwl 4965 since 2.6.32.10
- From: U Kuehn <ukuehn@xxxxxxx>
- Re: [PATCH 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [rt2x00-users] [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gabor Juhos <juhosg@xxxxxxxxxxx>
- Re: [rt2x00-users] [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Benoit PAPILLAULT <benoit.papillault@xxxxxxx>
- Google Summer of Code 2010 - Student Application Deadline has passed
- From: Till Kamppeter <till.kamppeter@xxxxxxxxx>
- Re: [PATCH 031/102] ath9k_hw: run Lindent on intivals
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- Re: [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 000/102] ath9k: add AR9003 support
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 031/102] ath9k_hw: run Lindent on intivals
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [ath9k-devel] ath9k/mac80211 and 802.11n in IBSS mode
- From: Benoit PAPILLAULT <benoit.papillault@xxxxxxx>
- Re: [PATCH 011/102] ath9k_hw: add some comments for ath9k_set_power_network_sleep()
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH wireless-2.6] iwlwifi: work around bogus active chains detection
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 10/12] iwlwifi: fix compile warnings when compiling without debug
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 05/12] iwlwifi: remove pointless sta_id invalid check
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 08/12] iwlwifi: update tx command response status
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 09/12] iwlwifi: small changes in comments
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 06/12] iwlwifi: clean up last_phy_res
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 07/12] iwlwifi: add more debug info in error event dump
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 12/12] iwlwifi: avoid Tx queue memory allocation in interface down
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 01/12] iwlwifi: default max event log size
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 04/12] iwlagn: simplify WEP key check
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 11/12] iwlwifi: fix compiler warning
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 03/12] iwlwifi: remove wrong key use check
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 02/12] iwlwifi: make WEP key restoring explicit
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 00/12] iwlwifi features for 2.6.35
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- Re: 2.6.34-rc3-git8: Reported regressions 2.6.32 -> 2.6.33
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- [PATCH] p54pci: prevent stuck rx-ring on slow system
- From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
- Re: Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH] compat: add rcu_dereference_check
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH] compat: add rcu_dereference_check
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Warning in ath9k after update from 2.6.33.1 to 2.6.33.2
- From: Thomas Bächler <thomas@xxxxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: pull request: wireless-2.6 2010-04-09
- From: David Miller <davem@xxxxxxxxxxxxx>
- pull request: wireless-2.6 2010-04-09
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: ath9k/mac80211 and 802.11n in IBSS mode
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] net/wireless/libertas: do not call wiphy_unregister() w/o wiphy_register()
- From: Holger Schurig <hs4233@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- ath9k/mac80211 and 802.11n in IBSS mode
- From: Joerg Pommnitz <pommnitz@xxxxxxxxx>
- Re: Any news regarding multicast rate configuration?
- From: Joerg Pommnitz <pommnitz@xxxxxxxxx>
- Re: [PATCH] mac80211: Prevent dynamic ps for rx broadcast frames
- From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
- Re: [PATCH] mac80211: Prevent dynamic ps for rx broadcast frames
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] mac80211: Prevent dynamic ps for rx broadcast frames
- From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
- Re: Any news regarding multicast rate configuration?
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH] mac80211: Prevent starting of hw scan if it is already in progress
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 3/5] wl1271: Fix mac80211 RTS threshold requests during WL1271_STATE_OFF
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 2/5] wl1271: Fix mac80211 configuration requests during WL1271_STATE_OFF
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 1/5] wl1271: Fix memory leaks on driver initialization
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 4/5] wl1271: Go to ELP in idle
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 5/5] wl1271: Add support for connection quality monitoring
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 0/5] wl1271: patches of the week wk14
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- Re: [PATCH] mac80211: Prevent starting of hw scan if it is already in progress
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Julian Calaby <julian.calaby@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Ivo Van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: 2.6.34-rc3-git8: Reported regressions 2.6.32 -> 2.6.33
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Julian Calaby <julian.calaby@xxxxxxxxx>
- 2.6.34-rc3-git8: Reported regressions 2.6.32 -> 2.6.33
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH 9/9] rt2x00: Add rt3390 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 8/9] rt2x00: Add rt3090 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 7/9] rt2x00: Add rt3071 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 2/9] rt2x00: Update rt2800 register definitions towards latest definitions.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 1/9] rt2x00: Let RF chipset decide the RF channel switch method to use in rt2800.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- [PATCH 4/9] rt2x00: Remove rt2800 version constants.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 8/9] rt2x00: Add rt3090 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 7/9] rt2x00: Add rt3071 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 2/9] rt2x00: Update rt2800 register definitions towards latest definitions.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 9/9] rt2x00: Add rt3390 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH 1/9] rt2x00: Let RF chipset decide the RF channel switch method to use in rt2800.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- Re: [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 002/102] ath9k_hw: add silicon revision macros for AR9300
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [REVERT] be6b38bcb175613f239e0b302607db346472c6b6. v2.6.34-rc3-406 oops with 4965AGN wireless
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH] iwlwifi: avoid warning by using result of iwl_send_cmd_pdu in iwl_sta_init_lq
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [REVERT] be6b38bcb175613f239e0b302607db346472c6b6. v2.6.34-rc3-406 oops with 4965AGN wireless
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH] iwlwifi: avoid warning by using result of iwl_send_cmd_pdu in iwl_sta_init_lq
- From: reinette chatre <reinette.chatre@xxxxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- [PATCH 0/2] packetspammer: few updates
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 1/2] packetspammer: update with the upstream radiotap header
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 2/2] packetspammer: add frame count option
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH] iw: fix typo on LDPC capability
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH] mac80211: fix typo for LDPC capability
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- AW: Any news regarding multicast rate configuration?
- From: Joerg Pommnitz <pommnitz@xxxxxxxxx>
- [PATCH] iwlwifi: avoid warning by using result of iwl_send_cmd_pdu in iwl_sta_init_lq
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: Any news regarding multicast rate configuration?
- From: Jouni Malinen <j@xxxxx>
- [PATCH 006/102] ath9k_hw: add support for GPIO differences on AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 008/102] ath9k_hw: remove wrapper ath9k_hw_write_regs()
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 005/102] ath9k_hw: add simple register abstraction for some AR9300 registers
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 001/102] ath9k_hw: start building an abstraction layer for hardware routines
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 010/102] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 011/102] ath9k_hw: add some comments for ath9k_set_power_network_sleep()
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 013/102] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 015/102] ath9k_hw: move init config and default after chip is up
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 014/102] ath9k_hw: Add AR9003 PHY support
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 017/102] ath9k_hw: enable all ANI functionality for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 016/102] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 018/102] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 021/102] ath9k_hw: Fill rx_enable() for the AR9003 hardware family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 023/102] ath9k_hw: update the chip tests for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 024/102] ath9k_hw: prevent reset control register zeroing on AR9003 reset
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 025/102] ath9k_hw: Add AR9003 PHY register definitions
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 027/102] ath9k_hw: Set the channel on AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 029/102] ath9k_hw: Implement spur mitigation on AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 030/102] ath9k_hw: split initvals.h by hardware family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 033/102] ath9k_hw: add helpers for processing the AR9003 INI
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 032/102] ath9k_hw: add initvals for the AR9003 hardware family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 034/102] ath9k_hw: Split off ANI control to the PHY ops
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 043/102] ath9k: Add Rx EDMA support
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 035/102] ath9k_hw: add all the AR9003 PHY callbacks
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 038/102] ath9k_hw: Add abstraction to set/get link pointer
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 041/102] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 042/102] ath9k: Make bf_desc of ath_buf opaque
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 039/102] ath9k: Use abstraction to get link pointer
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 048/102] ath9k_hw: rename PA calib for AR9287
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 044/102] ath9k_hw: Split out the function for reading the noise floor
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 049/102] ath9k_hw: shift code for AR9280 OLC temp comp
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 050/102] ath9k_hw: move the AR9280 OLC temp comp to its own helper
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 051/102] ath9k_hw: simplify OLC temp compensation for AR9002
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 052/102] ath9k_hw: rename the PA calib routines to match their families
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 053/102] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 054/102] ath9k_hw: move the cal AR9100 calibration settings
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 057/102] ath9k_hw: add the config_pci_powersave AR9003 callback
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 056/102] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 059/102] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 055/102] ath9k_hw: split calib code by hardware families
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 062/102] ath9k_hw: Initialize interrupt mask for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 060/102] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 065/102] ath9k_hw: fill in the callbacks for calibration for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 063/102] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 061/102] ath9k_hw: Abstract the routine which returns interrupt status
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 058/102] ath9k_hw: split the generic hardware code by hardware family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 066/102] ath9k_hw: add a helper for changing the TX/RX masks
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 068/102] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 070/102] ath9k_hw: Implement AR9003 eeprom callbacks
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 069/102] ath9k_hw: restore mac address reading logic
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 071/102] ath9k_hw: add OFDM spur mitigation for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 074/102] ath9k_hw: simplify the AR9280 PCI EEPROM fix
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 072/102] ath9k_hw: Fill get_isr() for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 077/102] ath9k_hw: add the AR9300 SREV hw name print
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 080/102] ath9k_hw: Handle big-endian access for AR9300 EEPROM reads
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 078/102] ath9k_hw: add TX/RX gain register initialization for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 079/102] ath9k_hw: Update ath9k_hw_set_dma for AR9300
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 075/102] ath9k_hw: move the RF claim stuff to AR9002 hardware family
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 082/102] ath9k_hw: skip WEP aggregation enable code for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 083/102] ath9k_hw: Fix internal regulator setting on AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 084/102] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 086/102] ath9k_hw: Add function to configure tx status ring buffer
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 088/102] ath9k: add RXLP and RXHP to debugfs counters
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 087/102] ath9k_hw: Fill descriptor abstrations for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 089/102] ath9k_hw: enable CRC check of descriptors for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 090/102] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 085/102] ath9k_hw: Define abstraction for tx desc access
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 092/102] ath9k: Setup appropriate tx desc for regular dma and edma
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 091/102] ath9k_hw: move AR9002 mac ops to its own file
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 093/102] ath9k: Initialize and configure tx status for EDMA
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 094/102] ath9k_hw: Compute pointer checksum over the link descriptor
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 095/102] ath9k: Add frame onto hw tx fifo for edma
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 097/102] ath9k_hw: add LDPC support for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 101/102] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 098/102] ath9k: add LDPC support
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 100/102] ath9k: Handle Tx interrupt for EDMA
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 102/102] ath9k_hw: add the PCI ID for the first AR9300 device
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 099/102] ath9k: Enable TXOK and TXERR interrupts for TX EDMA
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 096/102] mac80211: add LDPC control flag
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 076/102] ath9k_hw: Configure Tx interrupt mitigation timer
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 081/102] ath9k_hw: skip asynch fifo enablement to AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 064/102] ath9k_hw: abstract loading noisefloor
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 067/102] ath9k_hw: complete AR9003 calibration
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 047/102] ath9k_hw: add a helper for the OLC tem compensation for AR9002
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 045/102] ath9k_hw: Get rid of eep_map and reorganize the functions.
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 046/102] ath9k_hw: add a helper for Power Amplifier calibration for AR9002
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 036/102] ath9k_hw: Define tx control struct for AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 040/102] ath9k: Use memcpy in ath_clone_txbuf()
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 031/102] ath9k_hw: run Lindent on intivals
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 037/102] ath9k_hw: Move code which populates ds_data to ath9k_hw
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 028/102] ath9k_hw: Implement PLL control on AR9003
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 022/102] ath9k_hw: Add few routines for rx edma support
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 026/102] ath9k_hw: add common channel select helpers for ar900[23]
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 020/102] ath9k_hw: Add abstraction for rx enable
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 009/102] ath9k_hw: Move some RF ops to the private callbacks
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 019/102] ath9k_hw: Fill few hw cap for edma
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 002/102] ath9k_hw: add silicon revision macros for AR9300
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 004/102] ath9k_hw: fix a missing hex prefix for a register mask
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 003/102] ath9k_hw: add a macro for abstracting generic timer access
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 000/102] ath9k: add AR9003 support
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- Re: [PATCH] net/wireless/libertas: do not call wiphy_unregister() w/o wiphy_register()
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH] wireless: ath9k: Fix most coding style issues in ath9k This patch fixed up almost all coding style issues in the ath9k driver found by the ceckpatch.pl tool. Signed-off-by: Michael Sprecher <sprecher.m@xxxxxxxxx>
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- Re: [PATCH] wireless: ath9k: Fix most coding style issues in ath9k This patch fixed up almost all coding style issues in the ath9k driver found by the ceckpatch.pl tool. Signed-off-by: Michael Sprecher <sprecher.m@xxxxxxxxx>
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- [PATCH] mac80211_hwsim: add sw_scan sw_scan_complete
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- Any news regarding multicast rate configuration?
- From: Joerg Pommnitz <pommnitz@xxxxxxxxx>
- [PATCH] mac80211: Prevent starting of hw scan if it is already in progress
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- [ath9k_htc] Current patches against 2.6.34-rc3-git4
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 3/7] crypto/testmgr: add testing for arc4 based on ecb(arc4)
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH] mac80211: delay skb linearising in rx decryption
- From: Zhu Yi <yi.zhu@xxxxxxxxx>
- Re: [PATCH] mac80211: fix paged RX crypto
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: fix paged RX crypto
- From: Zhu Yi <yi.zhu@xxxxxxxxx>
- Re: [PATCH] mac80211: fix paged RX crypto
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ath5k: add bounds check to pdadc table
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: [PATCH 3/4] ath5k: fix race condition in tx desc processing
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: [PATCH 2/4] ath5k: clean up queue manipulation
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: [PATCH 1/4] ath5k: correct channel setting for 2.5 mhz spacing
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- [PATCH 1/4] ath5k: correct channel setting for 2.5 mhz spacing
- From: Bob Copeland <me@xxxxxxxxxxxxxxx>
- [PATCH 3/4] ath5k: fix race condition in tx desc processing
- From: Bob Copeland <me@xxxxxxxxxxxxxxx>
- [PATCH 4/4] ath5k: add bounds check to pdadc table
- From: Bob Copeland <me@xxxxxxxxxxxxxxx>
- [PATCH 2/4] ath5k: clean up queue manipulation
- From: Bob Copeland <me@xxxxxxxxxxxxxxx>
- [PATCH 0/4] ath5k: misc fixes
- From: Bob Copeland <me@xxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: fix paged RX crypto
- From: Zhu Yi <yi.zhu@xxxxxxxxx>
- Re: [PATCH] mac80211: fix paged RX crypto
- From: Zhu Yi <yi.zhu@xxxxxxxxx>
- Re: pull request: wireless-2.6 2010-04-07
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: pull request: wireless-2.6 2010-04-07
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] compat-wireless: fix fallbacks for unknown branch, remote or remote URL
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] compat-wireless: fix fallbacks for unknown branch, remote or remote URL
- From: Pavel Roskin <proski@xxxxxxx>
- Re: 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- 2.6.34-rc3-git6: Reported regressions from 2.6.33
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- wireless-next-2.6 rebased from commit bc53e5129ce879ba024b7d21981871ea63a37b42
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- pull request: wireless-2.6 2010-04-07
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH] ath9k: fix compilation without CONFIG_ATH9K_DEBUGFS
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH] ath9k: fix compilation without CONFIG_ATH9K_DEBUGFS
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH] mac80211: enhance tracing
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 3/7] crypto/testmgr: add testing for arc4 based on ecb(arc4)
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [PATCH] mac80211: fix paged RX crypto
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] compat-wireless: find the actual remote URL
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH] compat: add net/net_namespace.h stub for Linux 2.6.23 and older
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- [PATCH] rt2x00: use rt2800_config_channel_rt3x for rt2872
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- Re: [PATCH] ath9k: simplify AR9220 fixup code for AR_AN_TOP2 register
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH v2] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/7] crypto/testmgr: add testing for arc4 based on ecb(arc4)
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- [PATCH v2] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- [PATCH] ath9k: simplify AR9220 fixup code for AR_AN_TOP2 register
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 4/4] compat-wireless: find the actual remote URL
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 3/4] compat-wireless: remove 25-device_create.patch, it's handled by compat
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 2/4] compat-wireless: remove 13-trace.patch, it's handled in compat now
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 1/4] compat-wireless: remove patch part dealing with net/net_namespace.h
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH] compat: add net/net_namespace.h stub for Linux 2.6.23 and older
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH] ath9k: fix compilation without CONFIG_ATH9K_DEBUGFS
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH 3/5] ath9k_htc: Fix module unloading issue
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: [PATCH] mwl8k: use the dma state API instead of the pci equivalents
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] compat: add stub headers linux/tracepoint.h and trace/define_trace.h
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH] compat-wireless: use wireless_handlers for wext functions.
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 2/2] compat: add stub headers linux/tracepoint.h and trace/define_trace.h
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 1/2] compat: add device_create() implementation for Linux 2.6.26 and older
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [rt2x00-users] FW RT307x/RT309x
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- Re: [PATCH] wireless: rt2x00: delete duplicates ids in rt73usb rt2500usb
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 0/4] rt2x00: Powersave fixes.
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH] wireless: rt2x00: delete duplicates ids in rt73usb rt2500usb
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH 0/4] rt2x00: Powersave fixes.
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- Re: [PATCH] mwl8k: use the dma state API instead of the pci equivalents
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] compat-wireless: fix use of device_create
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH] iwlwifi: use the dma state API instead of the pci equivalents
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH V4] rt2x00: remove MCU requests for SoC platforms
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- [PATCH] compat-wireless: use wireless_handlers for wext functions.
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 0/4] rt2x00: Powersave fixes.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 1/3] ath: Add a bus type field
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 0/4] rt2x00: Powersave fixes.
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- [PATCH] ath9k: fix double calls to ath_radio_enable
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Lockup inside of stop_machine() during modprobe aes (was Re: Another AR5008 hang)
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Dan Williams <dcbw@xxxxxxxxxx>
- [PATCH] wireless: rt2x00: delete duplicates ids in rt73usb rt2500usb
- From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH] libertas/sdio: 8686: set ECSI bit for 1-bit transfers
- From: Dan Williams <dcbw@xxxxxxxxxx>
- [PATCH] iw: Parse some common WPS attributes
- From: Jouni Malinen <j@xxxxx>
- Re: [PATCH 1/2] rt2x00: Fix typo in RF register programming of rt2800.
- From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
- Re: [PATCH 3/5] ath9k_htc: Fix module unloading issue
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [ath9k_htc] Current patches against 2.6.34-rc3-git4
- From: Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- Re: [PATCH 1/3] ath: Add a bus type field
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 2/5] ath9k_htc: Fix RX URB reference count
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 5/5] ath9k_htc: Fix HTC layer memleak
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 4/5] ath9k_htc: Use anchors for REGOUT pipe
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 3/5] ath9k_htc: Fix module unloading issue
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 1/5] ath9k_htc: Protect RX stream variables
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 7/7] mac80211: fix some RX aggregation locking
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 6/7] mac80211: clean up/fix aggregation code
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 5/7] mac80211: rename WLAN_STA_SUSPEND to WLAN_STA_BLOCK_BA
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 4/7] mac80211: remove ieee80211_sta_stop_rx_ba_session
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 3/7] mac80211: remove irq disabling for sta lock
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 2/7] mac80211: fix station destruction problem
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 1/7] mac80211: annotate station rcu dereferences
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH 0/7] mac80211 fixes
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] mac80211: check whether scan is in progress before queueing scan_work
- From: Teemu Paasikivi <ext-teemu.3.paasikivi@xxxxxxxxx>
- [PATCH] libertas/sdio: 8686: set ECSI bit for 1-bit transfers
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: Compat wireless with kernel 2.6.33
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH] libertas/sdio: set ECSI bit for 1-bit transfers
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: Convert arc4 from a cipher into a block cipher
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: Compat wireless with kernel 2.6.33
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: Compat wireless with kernel 2.6.33
- From: Matteo Croce <technoboy85@xxxxxxxxx>
- Re: Compat wireless with kernel 2.6.33
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: Compat wireless with kernel 2.6.33
- From: John Daiker <daikerjohn@xxxxxxxxx>
- Re: [PATCH 2/2] compat-wireless: fix use of device_create
- From: "Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>
- [PATCH 2/2] compat-wireless: fix use of device_create
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- [PATCH 1/2] compat-wireless: Backport changes in pcmcia system
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- [PATCH] compat: Backport clamp
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: Convert arc4 from a cipher into a block cipher
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH 6/7] net/mac80211: convert wep from arc4 to arc4blk
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH 5/7] net/wireless: switch lib80211_crypt_wep from arc4 to arc4blk
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH 4/7] net/wireless: switch lib80211_crypt_tkip from arc4 to arc4blk
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- [PATCH v2] crypto: add blkcipher implementation of ARC4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- prism54 -> p54pci transition not working
- From: Jens Westemeier <Jens_Westemeier@xxxxxx>
- Re: [PATCH 2/7] crypto: add blkcipher implementation of ARC4
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] ath9k_htc: Configure the beacon timers once the scan is completed.
- From: Vivek Natarajan <vnatarajan@xxxxxxxxxxx>
- [PATCH 2/3] ath9k_htc: Add support for power save.
- From: Vivek Natarajan <vnatarajan@xxxxxxxxxxx>
- [PATCH 1/3] ath9k: Add support for newer AR9285 chipsets.
- From: Vivek Natarajan <vnatarajan@xxxxxxxxxxx>
- Re: [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Jouni Malinen <j@xxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Max Filippov <jcmvbkbc@xxxxxxxxx>
- [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be __le16
- From: Max Filippov <jcmvbkbc@xxxxxxxxx>
- Re: [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Ледовских Николай Валерьевич <nledovskih@xxxxxxx>
- Re: [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Max Filippov <jcmvbkbc@xxxxxxxxx>
- Re: [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [rt2x00-users] FW RT307x/RT309x
- From: Richard Farina <sidhayn@xxxxxxxxx>
- Re: [RFT/RFC] p54pci: prevent stuck rx-ring on slow system
- From: Quintin Pitts <geek4linux@xxxxxxxxx>
- [PATCH] mac80211: fix ieee80211_meshconf_ie::meshconf_cap type to be u16
- From: Max Filippov <jcmvbkbc@xxxxxxxxx>
- [PATCH] cfg80211: Add local-state-change-only auth/deauth/disassoc
- From: Jouni Malinen <j@xxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Hin-Tak Leung <hintak.leung@xxxxxxxxx>
- Re: iwlagn unexpected AddBA Req
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- [RFT/RFC] p54pci: prevent stuck rx-ring on slow system
- From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Gus Wirth <gwirth79@xxxxxxxxx>
- Re: [rt2x00-users] FW RT307x/RT309x
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: RTL 8187b - naughty behaviour
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: [rt2x00-users] [PATCH] [RFC] rt2500pci: fix powersaving
- From: Matthijs Kooijman <matthijs@xxxxxxxx>
- Re: [rt2x00-users] [PATCH] [RFC] rt2500pci: fix powersaving
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH V4] rt2x00: remove MCU requests for SoC platforms
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- RTL 8187b - naughty behaviour
- From: Rogerio Luz Coelho <rogluz.news@xxxxxxxxx>
- Re: [PATCH V4] rt2x00: remove MCU requests for SoC platforms
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [rt2x00-users] FW RT307x/RT309x
- From: Luis Correia <buga@xxxxxxxxx>
- Re: [PATCH V4] rt2x00: remove MCU requests for SoC platforms
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- [PATCH V4] rt2x00: remove MCU requests for SoC platforms
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- [PATCH 7/7] net/ppp_mppe: convert from arc4 to arc4blk
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 6/7] net/mac80211: convert wep from arc4 to arc4blk
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 2/7] crypto: add blkcipher implementation of ARC4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 5/7] net/wireless: switch lib80211_crypt_wep from arc4 to arc4blk
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 4/7] net/wireless: switch lib80211_crypt_tkip from arc4 to arc4blk
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 3/7] crypto/testmgr: add testing for arc4 based on ecb(arc4)
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Convert arc4 from a cipher into a block cipher
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 1/7] crypto: rename arc4
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH 2/3] iwlwifi: use consistent table for tx data collect
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 3/3] iwlwifi: avoid Tx queue memory allocation in interface down
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 1/3] iwlwifi: fix DMA allocation warnings
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 0/3] iwlwifi fixes for 2.6.34
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 7/7] iwlwifi: avoid Tx queue memory allocation in interface down
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 6/7] iwlwifi: remove trailing space in messages
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 5/7] iwlwifi: code cleanup for generic defines
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 4/7] iwlwifi: deprecate "iwl4965" alias support
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 3/7] iwlwifi: clear rxq->queue in queue reset
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 2/7] iwlwifi: remove irrelevant comments
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 1/7] iwlwifi: merge module parameters into single place
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- [PATCH 0/7] iwlwifi updates for 2.6.35
- From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
- Pending patches for 802.11 not marked stable or which requires a manual backport
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH] iwlwifi: use the dma state API instead of the pci equivalents
- From: reinette chatre <reinette.chatre@xxxxxxxxx>
- [PATCH] wl1251: use DRIVER_NAME macro in wl1251_spi_driver
- From: Kalle Valo <kvalo@xxxxxxxxxx>
- [PATCH v2] ath5k: Adaptive Noise Immunity (ANI) Implementation
- From: Bruno Randolf <br1@xxxxxxxxxxx>
- Re: [PATCH] b43: N-PHY: fix copy&paste typo
- From: Michael Buesch <mb@xxxxxxxxx>
- Re: [PATCH V3] rt2x00: remove MCU requests for SoC platforms
- From: Ivo Van Doorn <ivdoorn@xxxxxxxxx>
- Re: firmware_loading_store: vmap() failed, broken firmware with kernles .27 - .30
- From: Golden <goldenstranger@xxxxxxxxx>
- Re: iwlagn unexpected AddBA Req
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: iwlagn unexpected AddBA Req
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: iwlagn unexpected AddBA Req
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- Re: [PATCH] mwl8k: use the dma state API instead of the pci equivalents
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- iwlagn unexpected AddBA Req
- From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
- [PATCH] iwlwifi: use the dma state API instead of the pci equivalents
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- [PATCH] mwl8k: use the dma state API instead of the pci equivalents
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: firmware_loading_store: vmap() failed, broken firmware with kernles .27 - .30
- From: Pavel Roskin <proski@xxxxxxx>
- Re: [PATCH] b43: N-PHY: fix copy&paste typo
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: [PATCH] b43: N-PHY: fix copy&paste typo
- From: "richardvoigt@xxxxxxxxx" <richardvoigt@xxxxxxxxx>
- Re: [PATCH V3] rt2x00: remove MCU requests for SoC platforms
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- Re: [PATCH V3] rt2x00: remove MCU requests for SoC platforms
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH V3] rt2x00: remove MCU requests for SoC platforms
- From: Luis Correia <buga@xxxxxxxxx>
- [PATCH] b43: N-PHY: fix copy&paste typo
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: [PATCH V2] Remove MCU requests for SoC platforms
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH] Implement IEEE 802.11ü
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: [PATCH] Implement IEEE 802.11ü
- From: Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx>
- [PATCH] Implement IEEE 802.11ü
- From: Michael Buesch <mb@xxxxxxxxx>
- zd1211rw: 07b8:6001 is a ZD1211B, but also a ZD1211
- From: Thijs van der Kraan <thijsvanderkraan@xxxxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Anders Grafström <grfstrm@xxxxxxxxxxxxxxxxxxxxx>
- Re: [RFT][PATCH] ssb: Look for SPROM at different offset on higher rev CC
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Greg KH <gregkh@xxxxxxx>
- Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH 1/3] ath: Add a bus type field
- From: Pavel Roskin <proski@xxxxxxx>
- Re: Intel Corporation PRO/Wireless 4965 AG or AGN randomly shuts off
- From: reinette chatre <reinette.chatre@xxxxxxxxx>
- Re: [RFT][PATCH] ssb: Look for SPROM at different offset on higher rev CC
- From: Michael Buesch <mb@xxxxxxxxx>
- Re: [PATCH V3] ssb: do not read SPROM if it does not exist
- From: Michael Buesch <mb@xxxxxxxxx>
- Re: [PATCH V3] ssb: do not read SPROM if it does not exist
- From: Michael Buesch <mb@xxxxxxxxx>
- Memory corruption with 2.6.32.10, but not with 2.6.34-rc3
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: [PATCH V2] Remove MCU requests for SoC platforms
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- [PATCH V2] Remove MCU requests for SoC platforms
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- Re: [PATCH] Remove MCU requests for SoC platforms
- From: Ivo van Doorn <ivdoorn@xxxxxxxxx>
- [PATCH] Remove MCU requests for SoC platforms
- From: Luis Correia <luis.f.correia@xxxxxxxxx>
- [PATCH 4/8] wl1271: Use minimum rate for each band for control messages
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 6/8] wl1271: Configure a higher listen interval to AP upon association
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 8/8] wl1271: Fix tx queue flushing
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 5/8] wl1271: Configure rates for templates
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 7/8] wl1271: Fix debug prints for beacon-loss and psm-entry-fail scenarios
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 3/8] wl1271: Fix keep-alive related command error
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 2/8] wl1271: added missing command header in wl1271_cmd_disconnect
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 0/8] wl1271: patches of the week
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- [PATCH 1/8] wl1271: fix sdio driver name in wl1271_sdio_driver
- From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
- Re: Intel Corporation PRO/Wireless 4965 AG or AGN randomly shuts off
- From: Jeremi Thebeau <jeremi.thebeau@xxxxxxxxxxxxxx>
- rfkill from bleeding edge compat-wireless detects the Hard Status of my rt2500usb wrong
- From: "Peter Littmann" <peter.littmann@xxxxxx>
- [PATCH 3/3] ath9k_htc: Add TL-WN422G v2 product ID
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 2/3] ath9k_hw: Don't check devid for ath9k_htc
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- [PATCH 1/3] ath: Add a bus type field
- From: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
- Re: pull request: wireless-2.6 2010-03-31
- From: David Miller <davem@xxxxxxxxxxxxx>
- [PATCH] ath9k: fix compile error without debug enabled
- From: Felix Fietkau <nbd@xxxxxxxxxxx>
- Re: [PATCH 2/4] rt2x00: Enable powersaving by default again on rt2500usb.
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH 2/4] rt2x00: Enable powersaving by default again on rt2500usb.
- From: Adam Baker <linux@xxxxxxxxxxxxxxxx>
- [PATCH 3/3] ath9k: remove ah->mask_reg, it's never used properly
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 2/3] ath9k: move imask from sc to ah
- From: Pavel Roskin <proski@xxxxxxx>
- [PATCH 1/3] ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion
- From: Pavel Roskin <proski@xxxxxxx>
- Re: firmware_loading_store: vmap() failed, broken firmware with kernles .27 - .30
- From: Golden <goldenstranger@xxxxxxxxx>
- Re: [rt2x00-users] [PATCH RFC] rt2500usb: disable broken HW encryption by default
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] ssb: Fix order of definitions and some text space indents
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- [PATCH 1/2] ssb: Use relative offsets for SPROM
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- [RFT][PATCH] ssb: Look for SPROM at different offset on higher rev CC
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: [PATCH V3] ssb: do not read SPROM if it does not exist
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- ath9k: receive stops working in AP-mode and 802.11n
- From: Johan Hovold <johan.hovold@xxxxxxxxxxxx>
- [PATCH V3] ssb: do not read SPROM if it does not exist
- From: "John W. Linville" <zajec5@xxxxxxxxx>
- Re: [PATCH V2] ssb: do not read SPROM if it does not exist
- From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- Re: [PATCH V2] ssb: do not read SPROM if it does not exist
- From: Michael Buesch <mb@xxxxxxxxx>
- Re: [rt2x00-users] [PATCH] [RFC] rt2500pci: fix powersaving
- From: Matthijs Kooijman <matthijs@xxxxxxxx>
- Re: [PATCH] [RFC] rt2500pci: fix powersaving
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- Re: [PATCH] [RFC] rt2500pci: fix powersaving
- From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
- [PATCH V2] ssb: do not read SPROM if it does not exist
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: [PATCH v2 5/7] drivers/net: Remove local #define IW_IOCTL, use STD_IW_HANDLER
- From: Geoff Levand <geoffrey.levand@xxxxxxxxxxx>
- Re: [ath9k-devel] Power Save for ath9k
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH] [RFC] rt2500pci: fix powersaving
- From: Matthijs Kooijman <matthijs@xxxxxxxx>
- Re: Intel Corporation PRO/Wireless 4965 AG or AGN randomly shuts off
- From: reinette chatre <reinette.chatre@xxxxxxxxx>
- Re: [PATCH 2/2] mac80211: Moved mesh action codes to a more visible location
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
[Index of Archives]
[Linux Host AP]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]