Definitions taken from the latest rt2860 / rt2870 / rt3070 / rt3090 Ralink vendor drivers. Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2800.h | 55 +++++++++++++++++++++++++++++- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 2 files changed, 54 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 74c0433..455dc3f 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -56,6 +56,7 @@ #define RF3021 0x0007 #define RF3022 0x0008 #define RF3052 0x0009 +#define RF3320 0x000b /* * Chipset version. @@ -90,10 +91,16 @@ #define NUM_TX_QUEUES 4 /* - * USB registers. + * Registers. */ /* + * OPT_14: Unknown register used by rt3xxx devices. + */ +#define OPT_14_CSR 0x0114 +#define OPT_14_CSR_BIT0 FIELD32(0x00000001) + +/* * INT_SOURCE_CSR: Interrupt source register. * Write one to clear corresponding bit. * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c @@ -398,6 +405,31 @@ #define EFUSE_DATA3 0x059c /* + * LDO_CFG0 + */ +#define LDO_CFG0 0x05d4 +#define LDO_CFG0_DELAY3 FIELD32(0x000000ff) +#define LDO_CFG0_DELAY2 FIELD32(0x0000ff00) +#define LDO_CFG0_DELAY1 FIELD32(0x00ff0000) +#define LDO_CFG0_BGSEL FIELD32(0x03000000) +#define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000) +#define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000) +#define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000) + +/* + * GPIO_SWITCH + */ +#define GPIO_SWITCH 0x05dc +#define GPIO_SWITCH_0 FIELD32(0x00000001) +#define GPIO_SWITCH_1 FIELD32(0x00000002) +#define GPIO_SWITCH_2 FIELD32(0x00000004) +#define GPIO_SWITCH_3 FIELD32(0x00000008) +#define GPIO_SWITCH_4 FIELD32(0x00000010) +#define GPIO_SWITCH_5 FIELD32(0x00000020) +#define GPIO_SWITCH_6 FIELD32(0x00000040) +#define GPIO_SWITCH_7 FIELD32(0x00000080) + +/* * MAC Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ @@ -1492,6 +1524,14 @@ struct mac_iveiv_entry { #define BBP4_BANDWIDTH FIELD8(0x18) /* + * BBP 138: Unknown + */ +#define BBP138_RX_ADC1 FIELD8(0x02) +#define BBP138_RX_ADC2 FIELD8(0x04) +#define BBP138_TX_DAC1 FIELD8(0x20) +#define BBP138_TX_DAC2 FIELD8(0x40) + +/* * RFCSR registers * The wordsize of the RFCSR is 8 bits. */ @@ -1499,7 +1539,8 @@ struct mac_iveiv_entry { /* * RFCSR 6: */ -#define RFCSR6_R FIELD8(0x03) +#define RFCSR6_R1 FIELD8(0x03) +#define RFCSR6_R2 FIELD8(0x40) /* * RFCSR 7: @@ -1512,6 +1553,14 @@ struct mac_iveiv_entry { #define RFCSR12_TX_POWER FIELD8(0x1f) /* + * RFCSR 17: + */ +#define RFCSR17_R1 FIELD8(0x07) +#define RFCSR17_R2 FIELD8(0x08) +#define RFCSR17_R3 FIELD8(0x20) + + +/* * RFCSR 22: */ #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) @@ -1603,6 +1652,8 @@ struct mac_iveiv_entry { #define EEPROM_NIC_WPS_PBC FIELD16(0x0080) #define EEPROM_NIC_BW40M_BG FIELD16(0x0100) #define EEPROM_NIC_BW40M_A FIELD16(0x0200) +#define EEPROM_NIC_ANT_DIVERSITY FIELD16(0x0800) +#define EEPROM_NIC_DAC_TEST FIELD16(0x8000) /* * EEPROM frequency diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 6fdec15..394c8e4 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -797,7 +797,7 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); + rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html