Hello, I have a SMC 2802 card, working with Win XP and prism54, now I want to go to the p54pci driver. lspci gives: Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01) modprobe p54pci gives in /var/log/messages: p54pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 p54pci 0000:05:01.0: firmware: requesting isl3886pci phy2: p54 detected a LM86 firmware p54: rx_mtu reduced from 3240 to 2376 phy2: FW rev 2.17.2.0 - Softmac protocol 7.6 phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES phy2: device does not respond! p54pci 0000:05:01.0: PCI INT A disabled p54pci: probe of 0000:05:01.0 failed with error -16 I have a 2.6.31.12-0.2-desktop 64 bit kernel from OpenSUSE 11.2 and tried with all flavours of fw. In the notes I have found, that old SMC 2802 cards (without eeprom) are not supported. How can I check that I have such a card? Will this card been supported (soon)? Greetings, Jens. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
