Am Sonntag, 7. Februar 2010 20:34:41 schrieb Lorenzo Raschi: > Hello, > > I've been using prism54 with fullmac firmware on my gentoo router since > one year. > In AP mode prism54 works fine, although the fact that it works in open > mode only (no key support). > Because I saw prism54 is deprecated now, I'm trying to switch to p54pci > + softmac driver. Unfortunately it doesn't work. > Same problem with my fullmac SMC 2802 card. /var/log/messages gives: p54pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 p54pci 0000:05:01.0: firmware: requesting isl3886pci phy2: p54 detected a LM86 firmware p54: rx_mtu reduced from 3240 to 2376 phy2: FW rev 2.17.2.0 - Softmac protocol 7.6 phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES phy2: device does not respond! p54pci 0000:05:01.0: PCI INT A disabled p54pci: probe of 0000:05:01.0 failed with error -16 lspci gives: Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01) The card is working with prism54 driver and on my dual boot Windows XP. I tries all kinds of FW. I'm running OpenSUSE 11.2 with the 2.6.31.8-0.1-desktop kernel. Greetings, Jens. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
