From: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx> Also, no need for the udelay(2) on AR9003 hardware. Signed-off-by: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx> Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/hw.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 207116a..6efb291 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1432,9 +1432,11 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah) REG_WRITE(ah, AR_RC, AR_RC_AHB); REG_WRITE(ah, AR_RTC_RESET, 0); - udelay(2); - if (!AR_SREV_9100(ah)) + if (!AR_SREV_9300_20_OR_LATER(ah)) + udelay(2); + + if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah)) REG_WRITE(ah, AR_RC, 0); REG_WRITE(ah, AR_RTC_RESET, 1); -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
