AR9300 based hardware can 3x3 MCS rates, this should be set in the
HT capabilities.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/init.c | 39 +++++++++++++++++++++++---------
1 files changed, 28 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index ca6e781..2c0630e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -175,6 +175,18 @@ static const struct ath_ops ath9k_common_ops = {
.write = ath9k_iowrite32,
};
+static int count_streams(unsigned int chainmask, int max)
+{
+ int streams = 0;
+
+ do {
+ if (++streams == max)
+ break;
+ } while ((chainmask = chainmask & (chainmask - 1)));
+
+ return streams;
+}
+
/**************************/
/* Initialization */
/**************************/
@@ -182,8 +194,10 @@ static const struct ath_ops ath9k_common_ops = {
static void setup_ht_cap(struct ath_softc *sc,
struct ieee80211_sta_ht_cap *ht_info)
{
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
u8 tx_streams, rx_streams;
+ int i, max_streams;
ht_info->ht_supported = true;
ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
@@ -197,25 +211,28 @@ static void setup_ht_cap(struct ath_softc *sc,
ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ max_streams = 3;
+ else
+ max_streams = 2;
+
/* set up supported mcs set */
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
- tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
- 1 : 2;
- rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
- 1 : 2;
+ tx_streams = count_streams(common->tx_chainmask, max_streams);
+ rx_streams = count_streams(common->rx_chainmask, max_streams);
+
+ ath_print(common, ATH_DBG_CONFIG,
+ "TX streams %d, RX streams: %d\n",
+ tx_streams, rx_streams);
if (tx_streams != rx_streams) {
- ath_print(common, ATH_DBG_CONFIG,
- "TX streams %d, RX streams: %d\n",
- tx_streams, rx_streams);
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
ht_info->mcs.tx_params |= ((tx_streams - 1) <<
IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
}
- ht_info->mcs.rx_mask[0] = 0xff;
- if (rx_streams >= 2)
- ht_info->mcs.rx_mask[1] = 0xff;
+ for (i = 0; i < rx_streams; i++)
+ ht_info->mcs.rx_mask[i] = 0xff;
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
}
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
