The calibration settings should go into the respective
hardware family AR9002 calibration settings callback,
ar9002_hw_init_cal_settings().
Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/hw.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ec48e7b..51f1e84 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -603,6 +603,12 @@ static bool ar9003_hw_macversion_supported(u32 macversion)
static void ar9002_hw_init_cal_settings(struct ath_hw *ah)
{
+ if (AR_SREV_9100(ah)) {
+ ah->iq_caldata.calData = &iq_cal_multi_sample;
+ ah->supp_cals = IQ_MISMATCH_CAL;
+ return;
+ }
+
if (AR_SREV_9160_10_OR_LATER(ah)) {
if (AR_SREV_9280_10_OR_LATER(ah)) {
ah->iq_caldata.calData = &iq_cal_single_sample;
@@ -1016,13 +1022,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
return -EOPNOTSUPP;
}
- if (AR_SREV_9100(ah)) {
- ah->iq_caldata.calData = &iq_cal_multi_sample;
- ah->supp_cals = IQ_MISMATCH_CAL;
- ah->is_pciexpress = false;
- }
-
- if (AR_SREV_9271(ah))
+ if (AR_SREV_9271(ah) || AR_SREV_9100(ah))
ah->is_pciexpress = false;
ah->hw_version.phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
