Linux SPI
[Prev Page][Next Page]
- [PATCH v2 01/19] dt-bindings: spi: dw: Add Tx/Rx DMA properties
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V5 3/7] i2c: i2c-qcom-geni: Add interconnect support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- Re: [PATCH v2 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: Alexandre Torgue <alexandre.torgue@xxxxxx>
- Re: [PATCH v2 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: dillon min <dillon.minfei@xxxxxxxxx>
- Re: [PATCH 11/17] spi: dw: Fix native CS being unset
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: Alexandre Torgue <alexandre.torgue@xxxxxx>
- Re: [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 11/17] spi: dw: Fix native CS being unset
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 11/17] spi: dw: Fix native CS being unset
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 11/17] spi: dw: Fix native CS being unset
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V5 4/7] spi: spi-geni-qcom: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH v5 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v5 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- RE: [PATCH v7 RESEND 13/13] dmaengine: imx-sdma: add uart rom script
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
- From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
- Re: [PATCH v7 RESEND 13/13] dmaengine: imx-sdma: add uart rom script
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v5 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v5 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- RE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 17/17] spi: dw: Use regset32 DebugFS method to create a registers file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 03/10] spi: dw: Add support for client driver memory operations
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 02/10] spi: dw: Add support for RX sample delay register
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 05/10] spi: spi-dw-mmio: Spin off MSCC platforms into spi-dw-mchp
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 06/10] dt-bindings: spi: spi-dw-mchp: Add Sparx5 support
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 09/10] arm64: dts: sparx5: Add spi-nor support
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 08/10] arm64: dts: sparx5: Add SPI controller
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 10/10] arm64: dts: sparx5: Add spi-nand devices
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 07/10] spi: spi-dw-mchp: Add Sparx5 support
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC
- From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 13/17] spi: dw: Initialize paddr in DW SPI MMIO private data
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: usb: ehci: Add missing 2nd register region
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 08/17] spi: dw: Clear DMAC register when done or stopped
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 07/17] spi: dw: Add Tx/Rx finish wait methods to DMA
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v5 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH v5 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- RE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- RE: [PATCH v7 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Robin Gong <yibin.gong@xxxxxxx>
- RE: [PATCH v7 RESEND 03/13] Revert "dmaengine: imx-sdma: fix context cache"
- From: Robin Gong <yibin.gong@xxxxxxx>
- RE: [PATCH v7 RESEND 05/13] dmaengine: imx-sdma: remove dupilicated sdma_load_context
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH 4/5] dt-bindings: ufs: ti: Add missing 'additionalProperties: false'
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH 3/5] dt-bindings: ufs: ti: Fix address properties handling
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 03/13] Revert "dmaengine: imx-sdma: fix context cache"
- From: "Fuzzey, Martin" <martin.fuzzey@flowbird.group>
- Re: [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 03/13] Revert "dmaengine: imx-sdma: fix context cache"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v7 RESEND 05/13] dmaengine: imx-sdma: remove dupilicated sdma_load_context
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 04/17] spi: dw: Cleanup generic DW DMA code namings
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 04/17] spi: dw: Cleanup generic DW DMA code namings
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/5] dt-bindings: usb: ehci: Add missing 2nd register region
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 3/5] dt-bindings: ufs: ti: Fix address properties handling
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 4/5] dt-bindings: ufs: ti: Add missing 'additionalProperties: false'
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: spi: Convert DW SPI binding to DT schema
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: spi: Convert DW SPI binding to DT schema
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Pratyush Yadav <p.yadav@xxxxxx>
- Re: [PATCH v1] spi: dw: Drop duplicate error message when remap resource
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: <Tudor.Ambarus@xxxxxxxxxxxxx>
- [PATCH v1] spi: dw: Drop duplicate error message when remap resource
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v2 3/3] spi: stm32: Add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
- From: dillon.minfei@xxxxxxxxx
- [PATCH v2 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: dillon.minfei@xxxxxxxxx
- [PATCH v2 1/3] ARM: dts: stm32: Add pin map for spi5 on stm32f429-disco board
- From: dillon.minfei@xxxxxxxxx
- [PATCH v2 0/3] Enable l3gd20 on stm32f429-disco board
- From: dillon.minfei@xxxxxxxxx
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: <Tudor.Ambarus@xxxxxxxxxxxxx>
- Re: [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- [PATCH v1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
- From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: spi: Add support to Lightning Mountain SoC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Pratyush Yadav <p.yadav@xxxxxx>
- Re: [PATCH v4 12/16] mtd: spi-nor: perform a Soft Reset on shutdown
- From: Pratyush Yadav <p.yadav@xxxxxx>
- Re: [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: sun6i: Add support for GPIO chip select lines
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/2] spi: uniphier: Depend on HAS_IOMEM
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: dw-mmio: Do not add acpi modalias when CONFIG_ACPI is not enabled
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: sun6i: Add support for GPIO chip select lines
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: sun6i: Add support for GPIO chip select lines
- From: Maxime Ripard <maxime@xxxxxxxxxx>
- Re: [PATCH 1/2] spi: uniphier: Depend on HAS_IOMEM
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: sun6i: Add support for GPIO chip select lines
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: dw-mmio: Do not add acpi modalias when CONFIG_ACPI is not enabled
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
- From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v7 RESEND 13/13] dmaengine: imx-sdma: add uart rom script
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 12/13] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 11/13] dma: imx-sdma: add i.mx6ul compatible name
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 10/13] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 09/13] spi: imx: add new i.mx6ul compatible name in binding doc
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 08/13] spi: imx: remove ERR009165 workaround on i.mx6ul
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 06/13] dmaengine: imx-sdma: add mcu_2_ecspi script
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 05/13] dmaengine: imx-sdma: remove dupilicated sdma_load_context
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 04/13] Revert "dmaengine: imx-sdma: refine to load context only once"
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 03/13] Revert "dmaengine: imx-sdma: fix context cache"
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 02/13] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 01/13] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
- From: Robin Gong <yibin.gong@xxxxxxx>
- [PATCH v7 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: dillon min <dillon.minfei@xxxxxxxxx>
- Re: [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: <Tudor.Ambarus@xxxxxxxxxxxxx>
- [PATCH v1 1/3] spi: spi-rockchip: cleanup use struct spi_controller
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH v1 2/3] spi: spi-rockchip: add support for spi slave mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH v1 3/3] spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH v1 0/3] spi: spi-rockchip spi slave mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 1/2] spi: uniphier: Depend on HAS_IOMEM
- From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
- [PATCH 2/2] spi: uniphier: Use devm_platform_get_and_ioremap_resource() to simplify code
- From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: Alexandre Torgue <alexandre.torgue@xxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v2] spi: sun6i: Add support for GPIO chip select lines
- From: Alistair Francis <alistair@xxxxxxxxxxxxx>
- Re: [PATCH] spi: sun6i: Add support for GPIO chip select lines
- From: Alistair <alistair@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxx>
- Re: [PATCH v4 12/16] mtd: spi-nor: perform a Soft Reset on shutdown
- From: <Tudor.Ambarus@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 3/3] spi: stm32: Add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
- From: dillon.minfei@xxxxxxxxx
- [PATCH 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
- From: dillon.minfei@xxxxxxxxx
- [PATCH 1/3] ARM: dts: stm32: Add pin map for spi5 on stm32f429-disco board
- From: dillon.minfei@xxxxxxxxx
- [PATCH 0/3] Enable l3gd20 on stm32f429-disco board
- From: dillon.minfei@xxxxxxxxx
- [PATCH] spi: dw-mmio: Do not add acpi modalias when CONFIG_ACPI is not enabled
- From: Jay Fang <f.fangjian@xxxxxxxxxx>
- Re: [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH v3] spi: add Renesas RPC-IF driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/17] spi: dw: Discard static DW DMA slave structures
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 04/17] spi: dw: Cleanup generic DW DMA code namings
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 03/17] spi: dw: Split up the generic DMA code and Intel MID driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: spi: Convert DW SPI binding to DT schema
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 11/17] spi: dw: Fix native CS being unset
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 17/17] spi: dw: Use regset32 DebugFS method to create a registers file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 16/17] spi: dw: Fix Rx-only DMA transfers
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 14/17] spi: dw: Add DMA support to the DW SPI MMIO driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 13/17] spi: dw: Initialize paddr in DW SPI MMIO private data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 12/17] spi: dw: Fix dma_slave_config used partly uninitialized
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH 6/6] spi: Move cadence-quadspi driver to drivers/spi/
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 5/6] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 4/6] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 3/6] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 1/6] mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 2/6] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH V5 6/7] spi: spi-qcom-qspi: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V5 5/7] tty: serial: qcom_geni_serial: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V5 4/7] spi: spi-geni-qcom: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V5 3/7] i2c: i2c-qcom-geni: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 08/17] spi: dw: Clear DMAC register when done or stopped
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 07/17] spi: dw: Add Tx/Rx finish wait methods to DMA
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxx>
- Re: [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 13/17] spi: dw: Initialize paddr in DW SPI MMIO private data
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 12/17] spi: dw: Fix dma_slave_config used partly uninitialized
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 10/17] spi: dw: Parameterize the DMA Rx/Tx burst length
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 09/17] spi: dw: Enable interrupts in accordance with DMA xfer mode
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 08/17] spi: dw: Clear DMAC register when done or stopped
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 06/17] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on DW SPI core
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 04/17] spi: dw: Cleanup generic DW DMA code namings
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 01/17] dt-bindings: spi: Convert DW SPI binding to DT schema
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 02/17] dt-bindings: spi: dw: Add DMA properties bindings
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 00/17] spi: dw: Add generic DW DMA controller support
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxx>
- Re: [PATCH v4 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V5 6/7] spi: spi-qcom-qspi: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V5 4/7] spi: spi-geni-qcom: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH 2/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] spi: Add Baikal-T1 System Boot SPI Controller driver
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: spi: Add Baikal-T1 System Boot SPI Controller binding
- From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v0 1/1] spi: spi-rockchip: add support for spi slave_mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH v0] spi: spi-rockchip spi slave mode
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH V5 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 6/7] spi: spi-qcom-qspi: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 5/7] tty: serial: qcom_geni_serial: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 4/7] spi: spi-geni-qcom: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 0/7] Add interconnect support to QSPI and QUP drivers
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 3/7] i2c: i2c-qcom-geni: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] spi: dw: Avoid useless assignments in generic DMA setup
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v1 2/2] spi: dw: Get rid of dma_inited flag
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/2] spi: dw: Avoid useless assignments in generic DMA setup
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH -next] spi: spi-amd: Remove spi_master_put in amd_spi_remove()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: [PATCH v1 1/8] spi: dw: Zero DMA Tx and Rx configurations on stack
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/8] spi: dw: Zero DMA Tx and Rx configurations on stack
- From: Feng Tang <feng.tang@xxxxxxxxx>
- [PATCH v1 3/8] spi: dw: Move interrupt.h to spi-dw.h who is user of it
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 5/8] spi: dw: Move few headers under #ifdef CONFIG_SPI_DW_MID_DMA
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 7/8] spi: dw: Propagate struct device pointer to ->dma_init() callback
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 4/8] spi: dw: Downgrade interrupt.h to irqreturn.h where appropriate
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 6/8] spi: dw: Add 'mfld' suffix to Intel Medfield related routines
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 8/8] spi: dw: Add Elkhart Lake PSE DMA support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/8] spi: dw: Zero DMA Tx and Rx configurations on stack
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 2/8] spi: dw: Remove unused variable in CR0 configuring hooks
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH -next] spi: bcm2835: Fix error return code in bcm2835_dma_init()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: a3700: make a3700_spi_init() return void
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH -next] spi: bcm2835: Fix error return code in bcm2835_dma_init()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: [PATCH v4 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] spi: sun6i: Add support for GPIO chip select lines
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH] spi: a3700: make a3700_spi_init() return void
- From: Jason Yan <yanaijie@xxxxxxxxxx>
- [PATCH] spi: sun6i: Add support for GPIO chip select lines
- From: Alistair Francis <alistair@xxxxxxxxxxxxx>
- Re: [PATCH v5 7/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v4 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v5 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v5 7/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 6/7] dt-bindings: spi: dw-apb-ssi: Add Intel Keem Bay support
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 5/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 4/7] dt-bindings: spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 3/7] spi: dw: Add support for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 2/7] spi: dw: Add update_cr0() callback to update CTRLR0
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 1/7] spi: dw: Fix typo in few registers name
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v5 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- Re: [PATCH] spi: bcm2835: Fixes bare use of unsigned
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/5] Grab bag with AMD SPI fixes
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: SPI driver probe problem during boot
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 1/7] spi: dw: Fix typo in few registers name
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: SPI driver probe problem during boot
- From: Martin Townsend <mtownsend1973@xxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- Re: SPI driver probe problem during boot
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- SPI driver probe problem during boot
- From: Martin Townsend <mtownsend1973@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v4 6/7] dt-bindings: spi: dw-apb-ssi: Add Intel Keem Bay support
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 7/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 5/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 4/7] dt-bindings: spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 3/7] spi: dw: Add support for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 2/7] spi: dw: Add update_cr0() callback to update CTRLR0
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 1/7] spi: dw: Fix typo in few registers name
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v4 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH v3 5/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: "Wan Mohamad, Wan Ahmad Zainie" <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v3 7/7] dt-bindings: spi: dw-apb-ssi: Add Intel Keem Bay support
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 6/7] dt-bindings: spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 5/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 4/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 2/7] spi: dw: Add update_cr0() callback to update CTRLR0
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 3/7] spi: dw: Add support for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 1/7] spi: dw: Fix typo in few registers name
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v3 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH 2/5] spi: amd: Pass probe errors back to driver core
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 0/5] Grab bag with AMD SPI fixes
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 1/5] spi: amd: Fix duplicate iounmap in error path
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 5/5] spi: amd: Drop superfluous member from struct amd_spi
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 4/5] spi: amd: Fix refcount underflow on remove
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 3/5] spi: amd: Drop duplicate driver data assignments
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH] spi: bcm2835: Fixes bare use of unsigned
- From: Jacko Dirks <jdirks.linuxdev@xxxxxxxxx>
- [PATCH v4 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH v4 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Add Renesas RPC-IF support
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] memory: add Renesas RPC-IF driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/2] Add Renesas RPC-IF support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] spi: pxa2xx: Apply CS clk quirk to BXT
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 02/16] spi: atmel-quadspi: reject DTR ops
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 02/16] spi: atmel-quadspi: reject DTR ops
- From: Pratyush Yadav <p.yadav@xxxxxx>
- Re: [PATCH v4 02/16] spi: atmel-quadspi: reject DTR ops
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/4] add SPI_SIMPLEX_RX/SPI_3WIRE_RX support for spi-stm32f4
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 4/4] add SPI_SIMPLEX_RX/SPI_3WIRE_RX support for spi-stm32f4
- From: dillon.minfei@xxxxxxxxx
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH 2/2] spi: atmel: Add missing annotation for atmel_spi_next_xfer_dma_submit()
- From: Jules Irenge <jbi.octave@xxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: spi: stm32-qspi: Fix unbalanced pm_runtime_enable issue
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH -next] spi: uniphier: fix error return code in uniphier_spi_probe()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH -next] spi: spi-amd: Fix a NULL vs IS_ERR() check in amd_spi_probe()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- spi: stm32-qspi: Fix unbalanced pm_runtime_enable issue
- From: <patrice.chotard@xxxxxx>
- Re: [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: spi-amd: remove unused variable 'opcode'
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: spi-amd: remove unused variable
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH -next] spi: uniphier: fix error return code in uniphier_spi_probe()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- [PATCH -next] spi: spi-amd: Fix a NULL vs IS_ERR() check in amd_spi_probe()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- [PATCH] spi: spi-amd: remove unused variable 'opcode'
- From: Zheng Bin <zhengbin13@xxxxxxxxxx>
- Re: [PATCH v3 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3 02/17] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH] spi: spi-amd: remove unused variable
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: spi-amd: fix warning
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V4 1/9] interconnect: Add devm_of_icc_get() as exported API for users
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- Re: [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v3 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH v3 02/17] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Daniel Schwierzeck <daniel.schwierzeck@xxxxxxxxx>
- Re: [PATCH V4 2/9] interconnect: Set peak requirement as twice of average
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- Re: [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V4 3/9] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V4 2/9] interconnect: Set peak requirement as twice of average
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: masonccyang@xxxxxxxxxxx
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/16] mtd: spi-nor: default to address width of 3 for configurable widths
- From: <Tudor.Ambarus@xxxxxxxxxxxxx>
- [PATCH] spi: spi-amd: fix warning
- From: Sanjay R Mehta <sanju.mehta@xxxxxxx>
- Re: [PATCH v4 05/16] mtd: spi-nor: default to address width of 3 for configurable widths
- From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
- [PATCH] spi: pxa2xx: Apply CS clk quirk to BXT
- From: Evan Green <evgreen@xxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/16] mtd: spi-nor: default to address width of 3 for configurable widths
- From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] spi: spi-amd: Add AMD SPI controller driver support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: spi-amd: Add AMD SPI controller driver support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- RE: [EXT] Re: [PATCH] spi: spi-fsl-dspi: Adding shutdown hook
- From: Peng Ma <peng.ma@xxxxxxx>
- Re: [PATCH v4 05/16] mtd: spi-nor: default to address width of 3 for configurable widths
- From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v2] spi: spi-amd: Add AMD SPI controller driver support
- From: Sanjay R Mehta <sanju.mehta@xxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v4 15/16] mtd: spi-nor: add support for Cypress Semper flash
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 16/16] mtd: spi-nor: allow using MT35XU512ABA in Octal DTR mode
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 14/16] mtd: spi-nor: expose spi_nor_default_setup() in core.h
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 13/16] mtd: spi-nor: Disable Octal DTR mode on suspend.
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 04/16] mtd: spi-nor: add support for DTR protocol
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 12/16] mtd: spi-nor: perform a Soft Reset on shutdown
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 02/16] spi: atmel-quadspi: reject DTR ops
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 03/16] spi: spi-mem: allow specifying a command's extension
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 11/16] mtd: spi-nor: enable octal DTR mode when possible
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 00/16] mtd: spi-nor: add xSPI Octal DTR support
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 10/16] mtd: spi-nor: do 2 byte reads for SR and FSR in DTR mode
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 09/16] mtd: spi-nor: use dummy cycle and address width info from SFDP
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 06/16] mtd: spi-nor: prepare BFPT parsing for JESD216 rev D
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 07/16] mtd: spi-nor: get command opcode extension type from BFPT
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 05/16] mtd: spi-nor: default to address width of 3 for configurable widths
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 08/16] mtd: spi-nor: parse xSPI Profile 1.0 table
- From: Pratyush Yadav <p.yadav@xxxxxx>
- [PATCH v4 01/16] spi: spi-mem: allow specifying whether an op is DTR or not
- From: Pratyush Yadav <p.yadav@xxxxxx>
- Re: [PATCH v2 5/5] spi: mxic: Patch for Octal 8D-8D-8D mode support
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] spi: spi-fsl-dspi: Adding shutdown hook
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 4/4] spi: lantiq: Add support to Lightning Mountain SoC
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH 3/4] dt-bindings: spi: Add support to Lightning Mountain SoC
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH 2/4] spi: lantiq: Dynamic configuration of interrupts and FIFO size
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH 1/4] spi: lantiq: Synchronize interrupt handlers and transfers
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- [PATCH 0/4] spi: lantiq: Synchronize interrupts, transfers and add new features
- From: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH v2] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
- From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
- From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
- [PATCH] spi: spi-fsl-dspi: Adding shutdown hook
- From: Peng Ma <peng.ma@xxxxxxx>
- Re: [PATCH] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V4 2/9] interconnect: Set peak requirement as twice of average
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- [PATCH v2 7/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 6/7] dt-bindings: spi: dw-apb-ssi: Add Intel Keem Bay support
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 5/7] spi: dw: Add support for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 4/7] dt-bindings: spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssi
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 3/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 2/7] spi: dw: Add update_cr0() callback to update CTRLR0
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 1/7] spi: dw: Fix typo in few registers name
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- [PATCH v2 0/7] spi: dw: Add support for Intel Keem Bay SPI
- From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- Re: [PATCH -next v2] spi: spi-fsl-qspi: Fix return value check of devm_ioremap() in probe
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH -next v2] spi: spi-fsl-qspi: Fix return value check of devm_ioremap() in probe
- From: Han Xu <han.xu@xxxxxxx>
- [PATCH -next v2] spi: spi-fsl-qspi: Fix return value check of devm_ioremap() in probe
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- RE: [PATCH -next] spi: spi-fsl-qspi: Fix return value check in fsl_qspi_probe()
- From: Ashish Kumar <ashish.kumar@xxxxxxx>
- [PATCH -next] spi: spi-fsl-qspi: Fix return value check in fsl_qspi_probe()
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- [PATCH v2 5/5] spi: mxic: Patch for Octal 8D-8D-8D mode support
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- [PATCH v2 2/5] mtd: spi-nor: sfdp: Add support for xSPI profile 1.0 table
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- [PATCH v2 3/5] mtd: spi-nor: Parse BFPT DWORD-18,19 and 20 for Octal 8D-8D-8D mode
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- [PATCH v2 1/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- [PATCH v2 4/5] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- [PATCH v2 0/5] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
- From: Mason Yang <masonccyang@xxxxxxxxxxx>
- Re: [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH v2 00/33] Documentation fixes for Kernel 5.8
- From: Jonathan Corbet <corbet@xxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [Patch v3 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
- From: Vladimir Oltean <olteanv@xxxxxxxxx>
- Re: [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
- From: Vladimir Oltean <olteanv@xxxxxxxxx>
- Re: [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH v5 11/12] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [Patch v2 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch v2 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH v2 02/17] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH] spi: hisi-sfc-v3xx: add error check after per operation
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: spi: stm32-qspi: Add pm_runtime support
- From: Mark Brown <broonie@xxxxxxxxxx>
- spi: stm32-qspi: Add pm_runtime support
- From: <patrice.chotard@xxxxxx>
- Re: [Patch 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] spi: hisi-sfc-v3xx: add error check after per operation
- From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
- [PATCH] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
- From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
- Re: [Patch 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [Patch 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [Patch 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Mark Brown <broonie@xxxxxxxxxx>
- [Patch 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- [Patch 1/9] spi: bcm-qspi: Handle clock probe deferral
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [PATCH V4 7/9] tty: serial: qcom_geni_serial: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V4 5/9] i2c: i2c-qcom-geni: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 0/2] Cleanup chip info in spi-dw driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: remove redundant assignment to variable ms
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/2] spi: spidev{,_test}: Add support for Octal mode data transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: dw: remove cs_control and poll_mode members from chip_data
- From: Clément Leger <cleger@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: dw: remove cs_control and poll_mode members from chip_data
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH v3] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
- Re: [PATCH v3] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
- Re: [PATCH 2/2] spi: dw: remove cs_control and poll_mode members from chip_data
- From: Clément Leger <cleger@xxxxxxxxxxxxx>
- [PATCH v3] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
- [Patch v2] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH 2/2] spi: dw: remove cs_control and poll_mode members from chip_data
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 0/2] Cleanup chip info in spi-dw driver
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 1/2] spi: dw: remove unused dw_spi_chip handling
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 2/2] spi: dw: remove cs_control and poll_mode members from chip_data
- From: Clement Leger <cleger@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Ashish Kumar <ashish.kumar@xxxxxxx>
- [PATCH 0/2] spi: spidev{,_test}: Add support for Octal mode data transfers
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 1/2] spi: spidev: Add support for Octal mode data transfers
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 2/2] spi: spidev_test: Add support for Octal mode data transfers
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- [PATCH] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
- From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Maxime Ripard <maxime@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Maxime Ripard <maxime@xxxxxxxxxx>
- [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V4 3/9] soc: qcom: geni: Support for ICC voting
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH] spi: orion: Convert to use GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Applied "spi: dt-bindings: rspi: Convert to json-schema" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: dt-bindings: rspi: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- RE: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Robin Gong <yibin.gong@xxxxxxx>
- RE: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Robin Gong <yibin.gong@xxxxxxx>
- Re: [PATCH V4 6/9] spi: spi-geni-qcom: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- [PATCH V4 0/9] Add interconnect support to QSPI and QUP drivers
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 1/9] interconnect: Add devm_of_icc_get() as exported API for users
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 2/9] interconnect: Set peak requirement as twice of average
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 5/9] i2c: i2c-qcom-geni: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 6/9] spi: spi-geni-qcom: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 7/9] tty: serial: qcom_geni_serial: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- [PATCH V4 9/9] arm64: dts: sc7180: Add interconnect for QUP and QSPI
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 8/9] spi: spi-qcom-qspi: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V4 3/9] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: "Fuzzey, Martin" <martin.fuzzey@flowbird.group>
- Re: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family
- From: Robin Gong <yibin.gong@xxxxxxx>
- Applied "spi: spidev_test: Remove hidden temporary file when make clean" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: spi-fsl-spi: Fix checkpatch error "foo * bar" should be "foo *bar"" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: remove redundant assignment to variable ms" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: sprd: adi: Use IS_ENABLED() to validate configs" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: spi-mtk-nor: make mtk_nor_exec_op() statuc" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: spi-sh-msiof: Fix checkpatch error Complex macros should use ()" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2 00/33] Documentation fixes for Kernel 5.8
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- Re: [PATCH v2 18/33] docs: spi: spi.h: fix a doc building warning
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2 18/33] docs: spi: spi.h: fix a doc building warning
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- RE: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- Applied "spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "spi: sc18is602: Fix a typo in MODULE_DESCRIPTION" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Re: [PATCH] spi: spi-amd: Add AMD SPI controller driver support
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH] spi: spi-amd: Add AMD SPI controller driver support
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v1] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] spi: sc18is602: Fix a typo in MODULE_DESCRIPTION
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH 03/21] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH] spi: sprd: adi: Use IS_ENABLED() to validate configs
- From: Baolin Wang <baolin.wang7@xxxxxxxxx>
- [PATCH] spi: spi-amd: Add AMD SPI controller driver support
- From: Sanjay R Mehta <sanju.mehta@xxxxxxx>
- Re: [PATCH] spi: remove redundant assignment to variable ms
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH] spi: remove redundant assignment to variable ms
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- [PATCH AUTOSEL 5.6 31/68] spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.6 60/68] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.5 22/56] spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.5 49/56] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 39/46] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 03/21] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH] spi: spi-axi-spi-engine: Access register after clock initialization
- From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
- [PATCH] spi: spi-axi-spi-engine: Access register after clock initialization
- From: Rafał Hibner <rafal.hibner@xxxxxxxxxxxx>
- Re: [PATCH] spi: spi-axi-spi-engine: Access register after clock initialization
- From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- [PATCH] spi: spi-mtk-nor: make mtk_nor_exec_op() statuc
- From: Jason Yan <yanaijie@xxxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 21/35] docs: spi: spi.h: fix a doc building warning
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- Re: [PATCH 21/35] docs: spi: spi.h: fix a doc building warning
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 21/35] docs: spi: spi.h: fix a doc building warning
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- Re: [PATCH 21/35] docs: spi: spi.h: fix a doc building warning
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 00/35] Documentation fixes for Kernel 5.8
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- [PATCH 21/35] docs: spi: spi.h: fix a doc building warning
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- [PATCH 19/21] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- [PATCH 03/21] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH] spi: dt-bindings: rspi: Convert to json-schema
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH] spi: spi-fsl-lpspi: Fix indentation and open brace should be on the previous line
- From: Aishwarya R <aishwaryarj100@xxxxxxxxx>
- [PATCH] spi: spi-fsl-spi: Fix checkpatch error "foo * bar" should be "foo *bar"
- From: Aishwarya R <aishwaryarj100@xxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 6/8] tty: serial: qcom_geni_serial: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 6/8] tty: serial: qcom_geni_serial: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 5/8] spi: spi-geni-qcom: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 4/8] i2c: i2c-qcom-geni: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH] spi: spidev_test: Remove hidden temporary file when make clean
- From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
- [PATCH] spi: spi-sh-msiof: Fix checkpatch error Complex macros should use ()
- From: Aishwarya R <aishwaryarj100@xxxxxxxxx>
- Applied "spi: spi-ep93xx: fix wrong SPI mode selection" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH] spi: spi-ep93xx: fix wrong SPI mode selection
- From: Jungseung Lee <js07.lee@xxxxxxxxxxx>
- RE: [PATCH 3/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: "Wan Mohamad, Wan Ahmad Zainie" <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Evan Green <evgreen@xxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v1 32/36] dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V3 6/8] tty: serial: qcom_geni_serial: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v1 32/36] dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH V3 5/8] spi: spi-geni-qcom: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V3 4/8] i2c: i2c-qcom-geni: Add interconnect support
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v1 32/36] dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+linux-spi@xxxxxxxxxx
- [PATCH V3 8/8] arm64: dts: sc7180: Add interconnect for QUP and QSPI
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 7/8] spi: spi-qcom-qspi: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 6/8] tty: serial: qcom_geni_serial: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 5/8] spi: spi-geni-qcom: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 4/8] i2c: i2c-qcom-geni: Add interconnect support
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 1/8] interconnect: Add devm_of_icc_get() as exported API for users
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- [PATCH V3 0/8] Add interconnect support to QSPI and QUP drivers
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [PATCH V2 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
- From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
- Re: [GIT PULL] regulator and spi updates for v5.7
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [GIT PULL] regulator and spi updates for v5.7
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- [GIT PULL] regulator and spi updates for v5.7
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 32/36] dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
[Index of Archives]
[CentOS]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Kernel Announce]