Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

 Thank you for the review comments...

On 20/5/2020 8:43 pm, Mark Brown wrote:
On Wed, May 20, 2020 at 08:36:12PM +0800, Ramuthevar,Vadivel MuruganX wrote:
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>

Add dt-bindings documentation for Cadence-QSPI controller to support
spi based flash memories.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
---
  .../devicetree/bindings/mtd/cadence-quadspi.txt    |  67 -----------
  .../devicetree/bindings/spi/cdns,qspi-nor.yaml     | 133 +++++++++++++++++++++

The changelog says this is adding a new binding but the actual change is
mostly a conversion to YAML.  Please split the additions out into a
separate change, ideally doing that before the conversion since there is
a backlog on review of YAML conversions.

Initially was sending the only YAML file alone, then reviewers suggest to me do this way so I did, next by split the patches like below...

1. remove the cadence-quadspi.txt (patch1)
2. convert txt to YAML (patch2)

Regards
Vadivel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux