Re: [PATCH v5 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 13, 2020 at 04:43:02PM +0530, Rajendra Nayak wrote:
> QSPI needs to vote on a performance state of a power domain depending on
> the clock rate. Add support for it by specifying the perf state/clock rate
> as an OPP table in device tree.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Cc: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> Cc: linux-spi@xxxxxxxxxxxxxxx
> ---
> Change in v5: OPP cleanup done as the last thing in qcom_qspi_remove()
> 
>  drivers/spi/spi-qcom-qspi.c | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
> index 3c4f83b..c853eba 100644
> --- a/drivers/spi/spi-qcom-qspi.c
> +++ b/drivers/spi/spi-qcom-qspi.c
> @@ -8,6 +8,7 @@
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/pm_opp.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/spi-mem.h>
>  
> @@ -139,6 +140,8 @@ struct qcom_qspi {
>  	struct device *dev;
>  	struct clk_bulk_data *clks;
>  	struct qspi_xfer xfer;
> +	struct opp_table *opp_table;
> +	bool has_opp_table;
>  	/* Lock to protect xfer and IRQ accessed registers */
>  	spinlock_t lock;
>  };
> @@ -235,7 +238,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
>  		speed_hz = xfer->speed_hz;
>  
>  	/* In regular operation (SBL_EN=1) core must be 4x transfer clock */
> -	ret = clk_set_rate(ctrl->clks[QSPI_CLK_CORE].clk, speed_hz * 4);
> +	ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
>  	if (ret) {
>  		dev_err(ctrl->dev, "Failed to set core clk %d\n", ret);
>  		return ret;
> @@ -481,6 +484,20 @@ static int qcom_qspi_probe(struct platform_device *pdev)
>  	master->handle_err = qcom_qspi_handle_err;
>  	master->auto_runtime_pm = true;
>  
> +	ctrl->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
> +	if (IS_ERR(ctrl->opp_table)) {
> +		ret = PTR_ERR(ctrl->opp_table);
> +		goto exit_probe_master_put;
> +	}
> +	/* OPP table is optional */
> +	ret = dev_pm_opp_of_add_table(&pdev->dev);
> +	if (!ret) {
> +		ctrl->has_opp_table = true;
> +	} else if (ret != -ENODEV) {
> +		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
> +		goto exit_probe_master_put;
> +	}
> +
>  	pm_runtime_enable(dev);
>  
>  	ret = spi_register_master(master);
> @@ -488,6 +505,9 @@ static int qcom_qspi_probe(struct platform_device *pdev)
>  		return 0;
>  
>  	pm_runtime_disable(dev);
> +	if (ctrl->has_opp_table)
> +		dev_pm_opp_of_remove_table(&pdev->dev);
> +	dev_pm_opp_put_clkname(ctrl->opp_table);
>  
>  exit_probe_master_put:
>  	spi_master_put(master);
> @@ -498,11 +518,16 @@ static int qcom_qspi_probe(struct platform_device *pdev)
>  static int qcom_qspi_remove(struct platform_device *pdev)
>  {
>  	struct spi_master *master = platform_get_drvdata(pdev);
> +	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
>  
>  	/* Unregister _before_ disabling pm_runtime() so we stop transfers */
>  	spi_unregister_master(master);
>  
>  	pm_runtime_disable(&pdev->dev);
> +	if (ctrl->has_opp_table)
> +		dev_pm_opp_of_remove_table(&pdev->dev);
> +	dev_pm_opp_put_clkname(ctrl->opp_table);
> +
>

remove 2nd empty line.

Maybe this can be done when the patch is applied if there are no other reasons
to respin the series?

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux