Linux Serial

• Thread Index

• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Tony Lindgren
• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Petr Mladek
• [PATCH v3] serial: 8250_omap: Implementation of Errata i2310
  • From: Udit Kumar
• Re: [PATCH v4 0/8] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: Johan Hovold
• Re: [PATCH v4 0/8] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: neil . armstrong
• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Tony Lindgren
• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Tony Lindgren
• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Petr Mladek
• Re: [PATCH v3 2/3] printk: Add match_devname_and_update_preferred_console()
  • From: Petr Mladek
• [PATCH v6 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• [PATCH v6 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• Re: [PATCH] serial: imx: ensure RTS signal is not left active after shutdown
  • From: Rasmus Villemoes
• Re: [PATCH v4 0/8] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: Konrad Dybcio
• Re: [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• Re: [PATCH v2] tty: serial: 8250: Fix port count mismatch with the device
  • From: Crescent CY Hsieh
• Re: [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Greg Kroah-Hartman
• [PATCH v3 3/3] serial: core: Rename preferred console handling for match and update
  • From: Tony Lindgren
• [PATCH v3 2/3] printk: Add match_devname_and_update_preferred_console()
  • From: Tony Lindgren
• [PATCH v3 1/3] printk: Revert add_preferred_console_match() related commits
  • From: Tony Lindgren
• [PATCH v3 0/3] Fixes for console command line ordering
  • From: Tony Lindgren
• Re: [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Lech Perczak
• Re: [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Andy Shevchenko
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Konrad Dybcio
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Doug Anderson
• Re: [LSM/Landlock] Adding ability to sandbox TTYs
  • From: Günther Noack
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Konrad Dybcio
• Re: [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Konrad Dybcio
• Re: [PATCH v4 5/8] serial: qcom-geni: Introduce qcom_geni_serial_poll_bitfield()
  • From: Konrad Dybcio
• Re: [PATCH v4 4/8] serial: qcom-geni: Fix arg types for qcom_geni_serial_poll_bit()
  • From: Konrad Dybcio
• Re: [PATCH v4 3/8] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Konrad Dybcio
• Re: [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hugo Villeneuve
• Re: [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hugo Villeneuve
• Re: [PATCH v5 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hugo Villeneuve
• Re: [PATCH v2] tty: serial: 8250: Fix port count mismatch with the device
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: 8250_omap: Implementation of Errata i2310
  • From: Greg KH
• Re: [PATCH v2] serial: 8250_omap: Implementation of Errata i2310
  • From: Kumar, Udit
• Re: [PATCH v2 2/2] printk: Add update_preferred_console()
  • From: Petr Mladek
• Re: [PATCH v2 2/2] printk: Add update_preferred_console()
  • From: Tony Lindgren
• [PATCH v2] tty: serial: 8250: Fix port count mismatch with the device
  • From: Crescent Hsieh
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Ilpo Järvinen
• Re: [PATCH v2] serial: 8250_omap: Implementation of Errata i2310
  • From: Greg KH
• [PATCH v2] serial: 8250_omap: Implementation of Errata i2310
  • From: Udit Kumar
• Re: [LSM/Landlock] Adding ability to sandbox TTYs
  • From: Greg KH
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Ferry Toth
• Re: [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Andy Shevchenko
• Re: [GIT PULL] TTY / Serial driver fixes for 6.10-rc4
  • From: pr-tracker-bot
• [LSM/Landlock] Adding ability to sandbox TTYs
  • From: COHEN-SCALI Remi (AMPERE)
• [GIT PULL] TTY / Serial driver fixes for 6.10-rc4
  • From: Greg KH
• Re: [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Crescent CY Hsieh
• Re: [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Crescent CY Hsieh
• Re: [PATCH v2 1/2] printk: Revert add_preferred_console_match() related commits
  • From: Petr Mladek
• Re: [PATCH v2 2/2] printk: Add update_preferred_console()
  • From: Petr Mladek
• Re: [PATCH v5 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Lech Perczak
• [PATCH v5 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• [PATCH v5 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• Re: [PATCH] serial: 8250_omap: Implementation of Errata i2310
  • From: Kumar, Udit
• Re: [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Greg Kroah-Hartman
• [PATCH] tty: serial: 8250: Fixes: Fix port count mismatch with the device
  • From: Crescent Hsieh
• Re: [PATCH] serial: 8250_omap: Implementation of Errata i2310
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250_omap: Implementation of Errata i2310
  • From: Vignesh Raghavendra
• Re: [PATCH] serial: 8250_omap: Implementation of Errata i2310
  • From: Greg KH
• [PATCH] serial: 8250_omap: Implementation of Errata i2310
  • From: Udit Kumar
• [PATCH v2] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Jacky Huang
• Re: [PATCH v4 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• Re: [PATCH v4 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Andy Shevchenko
• Re: [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Andy Shevchenko
• Re: [PATCH v3] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Rob Herring (Arm)
• Re: [PATCH v4 2/8] tty: serial: Add uart_fifo_timeout_ms()
  • From: Doug Anderson
• Re: [PATCH v4 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Krzysztof Kozlowski
• [PATCH v2 2/2] printk: Add update_preferred_console()
  • From: Tony Lindgren
• [PATCH v2 1/2] printk: Revert add_preferred_console_match() related commits
  • From: Tony Lindgren
• [PATCH v2 0/2] Fixes for console command line ordering
  • From: Tony Lindgren
• [syzbot] [serial?] possible deadlock in console_trylock_spinning (2)
  • From: syzbot
• Re: [PATCH v4 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH 0/6] Adjustments and Enhancements for MOXA PCI Serial Boards
  • From: Crescent CY Hsieh
• Re: [PATCH 3/6] tty: mxser: serial: 8250: Relocate device IDs from mxser to 8250_pci
  • From: Crescent CY Hsieh
• Re: [PATCH v4 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Krzysztof Kozlowski
• [PATCH v4 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• [PATCH v4 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH v4 2/8] tty: serial: Add uart_fifo_timeout_ms()
  • From: Ilpo Järvinen
• Re: [PATCH v3] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Alexey Charkov
• Re: [PATCH] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Jacky Huang
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Gustavo A. R. Silva
• Re: [PATCH v4 2/8] tty: serial: Add uart_fifo_timeout_ms()
  • From: Doug Anderson
• Re: [PATCH] dt-bindings: serial: nxp,sc16is7xx: Add missing child node
  • From: Rob Herring
• Re: [PATCH v3 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Conor Dooley
• [PATCH] dt-bindings: serial: nxp,sc16is7xx: Add missing child node
  • From: Animesh Agarwal
• Re: [PATCH v3 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hugo Villeneuve
• Re: [PATCH v3 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Conor Dooley
• Re: [PATCH v2] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Conor Dooley
• [PATCH v3] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Kanak Shilledar
• Re: [PATCH v2] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Kanak Shilledar
• Re: [PATCH v2] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• Re: [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Petr Mladek
• Re: [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• [PATCH v2] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Kanak Shilledar
• Re: [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Lech Perczak
• Re: [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hugo Villeneuve
• [PATCH v3 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  • From: Hui Wang
• [PATCH v3 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Ilpo Järvinen
• Re: [PATCH v4 2/8] tty: serial: Add uart_fifo_timeout_ms()
  • From: Ilpo Järvinen
• Re: [PATCH] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Greg KH
• Re: [PATCH] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Jacky Huang
• Re: [PATCH] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Rob Herring
• Re: [PATCH v1 1/1] serial: 8250_platform: Explicitly show we initialise ISA ports only once
  • From: Andy Shevchenko
• Re: [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Tony Lindgren
• Re: [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Andy Shevchenko
• [PATCH] dt-bindings: serial: vt8500-uart: convert to json-schema
  • From: Kanak Shilledar
• Re: [PATCH] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Greg KH
• Re: [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Tony Lindgren
• [PATCH] tty: serial: ma35d1: Add a NULL check for of_node
  • From: Jacky Huang
• Re: [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Petr Mladek
• Re: [PATCH 3/6] tty: mxser: serial: 8250: Relocate device IDs from mxser to 8250_pci
  • From: Jiri Slaby
• Re: [PATCH 1/6] tty: serial: 8250: Fix the amount of ports doesn't match the device
  • From: Jiri Slaby
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Jiri Slaby
• Re: [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: claudiu beznea
• Re: [bug report] tty: serial: Add Nuvoton ma35d1 serial driver support
  • From: Jacky Huang
• Re: [PATCH v3 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Doug Anderson
• Re: [PATCH v3 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Doug Anderson
• [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Douglas Anderson
• [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Douglas Anderson
• [PATCH v4 6/8] serial: qcom-geni: Just set the watermark level once
  • From: Douglas Anderson
• [PATCH v4 5/8] serial: qcom-geni: Introduce qcom_geni_serial_poll_bitfield()
  • From: Douglas Anderson
• [PATCH v4 4/8] serial: qcom-geni: Fix arg types for qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v4 3/8] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v4 2/8] tty: serial: Add uart_fifo_timeout_ms()
  • From: Douglas Anderson
• [PATCH v4 1/8] soc: qcom: geni-se: Add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
  • From: Douglas Anderson
• [PATCH v4 0/8] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: Douglas Anderson
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Ferry Toth
• [syzbot] Monthly serial report (Jun 2024)
  • From: syzbot
• Re: [syzbot] [serial?] possible deadlock in console_lock_spinning_enable (4)
  • From: Tetsuo Handa
• Re: [syzbot] [serial?] possible deadlock in console_lock_spinning_enable (4)
  • From: Hillf Danton
• [syzbot] [serial?] possible deadlock in console_lock_spinning_enable (4)
  • From: syzbot
• [bug report] tty: serial: Add Nuvoton ma35d1 serial driver support
  • From: Dan Carpenter
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Andy Shevchenko
• Re: [PATCH 1/6] tty: serial: 8250: Fix the amount of ports doesn't match the device
  • From: Andy Shevchenko
• Re: [PATCH 4/6] tty: serial: 8250: Add check for setting default serial interface
  • From: Andy Shevchenko
• Re: [PATCH 6/6] tty: serial: 8250: Add support for MUEX50 UART
  • From: Andy Shevchenko
• Re: [PATCH 5/6] tty: serial: 8250: Add support for Moxa PCIe boards to switch interface
  • From: Andy Shevchenko
• Re: [PATCH 0/6] Adjustments and Enhancements for MOXA PCI Serial Boards
  • From: Andy Shevchenko
• [PATCH] tty: add missing MODULE_DESCRIPTION() macros
  • From: Jeff Johnson
• Re: [PATCH 00/15] tty: serial: switch from circ_buf to kfifo
  • From: Ferry Toth
• Re: [PATCH v1 1/1] serial: 8250_platform: Explicitly show we initialise ISA ports only once
  • From: kernel test robot
• Re: [PATCH v2 0/3] serial: Fix regression in omap-serial and pxa
  • From: Doug Brown
• [PATCH 6/6] tty: serial: 8250: Add support for MUEX50 UART
  • From: Crescent Hsieh
• [PATCH 5/6] tty: serial: 8250: Add support for Moxa PCIe boards to switch interface
  • From: Crescent Hsieh
• [PATCH 4/6] tty: serial: 8250: Add check for setting default serial interface
  • From: Crescent Hsieh
• [PATCH 3/6] tty: mxser: serial: 8250: Relocate device IDs from mxser to 8250_pci
  • From: Crescent Hsieh
• [PATCH 2/6] tty: serial: 8250: Add 2 ports PCI configuration for 921600 BAR 2
  • From: Crescent Hsieh
• [PATCH 0/6] Adjustments and Enhancements for MOXA PCI Serial Boards
  • From: Crescent Hsieh
• [PATCH 1/6] tty: serial: 8250: Fix the amount of ports doesn't match the device
  • From: Crescent Hsieh
• Re: [PATCH v2 0/3] serial: Fix regression in omap-serial and pxa
  • From: Jonas Gorski
• Re: [PATCH v3 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Ilpo Järvinen
• Re: [PATCH v3 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Ilpo Järvinen
• [PATCH v2 3/3] serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
  • From: Doug Brown
• [PATCH v2 2/3] serial: core: introduce uart_port_tx_limited_flags()
  • From: Doug Brown
• [PATCH v2 1/3] Revert "serial: core: only stop transmit when HW fifo is empty"
  • From: Doug Brown
• [PATCH v2 0/3] serial: Fix regression in omap-serial and pxa
  • From: Doug Brown
• [PATCH v1 1/1] serial: 8250_platform: Explicitly show we initialise ISA ports only once
  • From: Andy Shevchenko
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Doug Brown
• [PATCH 2/2] Revert "printk: Flag register_console() if console is set on command line"
  • From: Tony Lindgren
• [PATCH 1/2] printk: Track command line console positions to fix console order
  • From: Tony Lindgren
• Re: [PATCH] printk: Rename console_replay_all() and update context
  • From: Sreenath Vijayan
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• [tty:tty-linus] BUILD SUCCESS ae01e52da244af5d650378ada1bfd2d946dc1b45
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS ffd8e8bd26e945a957e827427e8cbe8fa8e23d0d
  • From: kernel test robot
• Re: [PATCH 1/2] dt-bindings: serial: mediatek,uart: add MT7988
  • From: Conor Dooley
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hugo Villeneuve
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• [PATCH AUTOSEL 5.10 6/7] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 8/9] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 7/9] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 11/12] tty: add the option to have a tty reject a new ldisc
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 09/12] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 08/12] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 15/20] tty: add the option to have a tty reject a new ldisc
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 12/20] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 11/20] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Sasha Levin
• [PATCH AUTOSEL 6.8 17/24] tty: add the option to have a tty reject a new ldisc
  • From: Sasha Levin
• [PATCH AUTOSEL 6.8 13/24] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 6.8 12/24] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Sasha Levin
• [PATCH AUTOSEL 6.9 19/28] tty: add the option to have a tty reject a new ldisc
  • From: Sasha Levin
• [PATCH AUTOSEL 6.9 14/28] serial: exar: adding missing CTI and Exar PCI ids
  • From: Sasha Levin
• [PATCH AUTOSEL 6.9 13/28] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Sasha Levin
• Re: [PATCH 2/2] arm64: dts: mediatek: mt7988: add UART controllers
  • From: AngeloGioacchino Del Regno
• Re: [PATCH 1/2] dt-bindings: serial: mediatek,uart: add MT7988
  • From: AngeloGioacchino Del Regno
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Andy Shevchenko
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Andy Shevchenko
• RE: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Maarten Brock
• Re: [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Tomi Valkeinen
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• Re: [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Ulf Hansson
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Tomi Valkeinen
• RE: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Maarten Brock
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Ulf Hansson
• Re: [PATCH printk v2 00/18] add threaded printing + the rest
  • From: Juri Lelli
• RE: [PATCH] serial: samsung: Change MAX_CLK_NAME_LENGTH to 17
  • From: Alim Akhtar
• [PATCH 2/2] arm64: dts: mediatek: mt7988: add UART controllers
  • From: Rafał Miłecki
• [PATCH 1/2] dt-bindings: serial: mediatek,uart: add MT7988
  • From: Rafał Miłecki
• Re: [PATCH printk v2 00/18] add threaded printing + the rest
  • From: John Ogness
• Re: [PATCH] serial: samsung: Change MAX_CLK_NAME_LENGTH to 17
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: samsung: Change MAX_CLK_NAME_LENGTH to 17
  • From: Kwanghoon Son
• Re: [PATCH v5 5/5] serial: sh-sci: Add support for RZ/V2H(P) SoC
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• Re: [PATCH] serial: samsung: Change MAX_CLK_NAME_LENGTH to 17
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• [PATCH] serial: samsung: Change MAX_CLK_NAME_LENGTH to 17
  • From: Kwanghoon Son
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• [PATCH v5 5/5] serial: sh-sci: Add support for RZ/V2H(P) SoC
  • From: Prabhakar
• [PATCH v5 4/5] dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
  • From: Prabhakar
• [PATCH v5 3/5] dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
  • From: Prabhakar
• [PATCH v5 2/5] dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
  • From: Prabhakar
• [PATCH v5 1/5] dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
  • From: Prabhakar
• [PATCH v5 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
  • From: Prabhakar
• Re: [PATCH v2 1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  • From: Conor Dooley
• [PATCH v3 5/7] serial: qcom-geni: Just set the watermark level once
  • From: Douglas Anderson
• [PATCH v3 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v3 1/7] soc: qcom: geni-se: Add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
  • From: Douglas Anderson
• Re: [PATCH v2 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Doug Anderson
• [PATCH v3 7/7] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Douglas Anderson
• [PATCH v3 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Douglas Anderson
• [PATCH v3 4/7] serial: qcom-geni: Introduce qcom_geni_serial_poll_bitfield()
  • From: Douglas Anderson
• [PATCH v3 3/7] serial: qcom-geni: Fix arg types for qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v3 0/7] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: Douglas Anderson
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hugo Villeneuve
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hugo Villeneuve
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hugo Villeneuve
• Re: [PATCH v4 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
  • From: Lad, Prabhakar
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Andy Shevchenko
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Andy Shevchenko
• Re: [PATCH printk v2 00/18] add threaded printing + the rest
  • From: Juri Lelli
• Re: [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Krzysztof Kozlowski
• [PATCH v2 2/2] serial: sc16is7xx: hard reset the chip if reset-gpios is defined in dt
  • From: Hui Wang
• [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Jonas Gorski
• Re: [PATCH 2/2] serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
  • From: Hugo Villeneuve
• Re: [PATCH v4 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
  • From: Greg Kroah-Hartman
• Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH printk v2 15/18] tty: sysfs: Add nbcon support for 'active'
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] serial: sc16is7xx: setup reset pin if it is defined in device tree
  • From: Hui Wang
• Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• [PATCH v2 3/3] riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
  • From: Hal Feng
• [PATCH v2 2/3] serial: 8250_dw: Use reset array API to get resets
  • From: Hal Feng
• [PATCH v2 1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  • From: Hal Feng
• [PATCH v2 0/3] Add the core reset for UARTs of StarFive JH7110
  • From: Hal Feng
• [no subject]
  • From: Unknown
• Re: [PATCH] printk: Rename console_replay_all() and update context
  • From: Petr Mladek
• Re: [PATCH 2/2] serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Krzysztof Kozlowski
• [PATCH printk v2 15/18] tty: sysfs: Add nbcon support for 'active'
  • From: John Ogness
• [PATCH printk v2 00/18] add threaded printing + the rest
  • From: John Ogness
• Re: [DO NOT MERGE v8 21/36] dt-bindings: serial: renesas,scif: Add scif-sh7751.
  • From: Rob Herring (Arm)
• Re: [DO NOT MERGE v8 19/36] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema
  • From: Rob Herring
• [PATCH 1/2] serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
  • From: Hugo Villeneuve
• [PATCH 2/2] serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
  • From: Hugo Villeneuve
• [PATCH 0/2] serial: sc16is7xx: Kconfig fixes after I2C/SPI driver split
  • From: Hugo Villeneuve
• Re: [PATCH 2/2] serial: sc16is7xx: setup reset pin if it is defined in device tree
  • From: Hugo Villeneuve
• Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Rob Herring
• [PATCH 2/2] serial: sc16is7xx: setup reset pin if it is defined in device tree
  • From: Hui Wang
• [PATCH 1/2] dt-bindings: serial: sc16is7xx: add reset-gpios
  • From: Hui Wang
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Gustavo A. R. Silva
• Re: [PATCH] serial: drop debugging WARN_ON_ONCE() from uart_write()
  • From: Jiri Slaby
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Jiri Slaby
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Doug Brown
• Re: [PATCH v2 1/7] soc: qcom: geni-se: Add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
  • From: Bjorn Andersson
• [tty:tty-linus] BUILD SUCCESS 7bc4244c882a7d7d79f4afefc50893244eb11d07
  • From: kernel test robot
• Re: [PATCH v3][next] tty: sunsu: Simplify device_node cleanup by using __free
  • From: Shresth Prasad
• Re: [GIT PULL] TTY driver fix for 6.10-rc2
  • From: pr-tracker-bot
• Re: [PATCH v1 2/2] serial: 8250: Extract platform driver
  • From: Sunil V L
• Re: [PATCH] serial: sc16is7xx: set driver name
  • From: kernel test robot
• [GIT PULL] TTY driver fix for 6.10-rc2
  • From: Greg KH
• Re: [PATCH v3] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Andy Shevchenko
• Re: [PATCH v2 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Ilpo Järvinen
• Re: [PATCH] serial: sc16is7xx: set driver name
  • From: Daniel Mack
• [PATCH v3] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Douglas Anderson
• Re: [PATCH v2 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Ilpo Järvinen
• Re: [PATCH] serial: sc16is7xx: set driver name
  • From: Greg KH
• [PATCH] serial: sc16is7xx: set driver name
  • From: Daniel Mack
• Re: [PATCH] tty: serial: 8250: Passing attr_group to universal driver
  • From: Greg Kroah-Hartman
• Re: [DO NOT MERGE v8 23/36] mfd: sm501: Convert platform_data to OF property
  • From: Lee Jones
• Re: [PATCH] tty: serial: 8250: Passing attr_group to universal driver
  • From: Crescent CY Hsieh
• Re: [PATCH] printk: Rename console_replay_all() and update context
  • From: Petr Mladek
• Re: [PATCH v2 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Andy Shevchenko
• Re: [PATCH v2 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Andy Shevchenko
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Tony Lindgren
• Re: [PATCH 2/2] serial: qcom-geni: Fix qcom_geni_serial_stop_tx_fifo() while xfer
  • From: Doug Anderson
• [PATCH v2 7/7] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Douglas Anderson
• [PATCH v2 6/7] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Douglas Anderson
• [PATCH v2 5/7] serial: qcom-geni: Just set the watermark level once
  • From: Douglas Anderson
• [PATCH v2 4/7] serial: qcom-geni: Introduce qcom_geni_serial_poll_bitfield()
  • From: Douglas Anderson
• [PATCH v2 3/7] serial: qcom-geni: Fix arg types for qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v2 2/7] serial: qcom-geni: Fix the timeout in qcom_geni_serial_poll_bit()
  • From: Douglas Anderson
• [PATCH v2 1/7] soc: qcom: geni-se: Add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
  • From: Douglas Anderson
• [PATCH v2 0/7] serial: qcom-geni: Overhaul TX handling to fix crashes/hangs
  • From: Douglas Anderson
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Nathan Chancellor
• Re: [DO NOT MERGE v8 00/36] Device Tree support for SH7751 based board
  • From: Bjorn Helgaas
• [PATCH v2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Douglas Anderson
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Gustavo A. R. Silva
• Re: [PATCH] tty: serial: 8250: Passing attr_group to universal driver
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Gustavo A. R. Silva
• [PATCH] tty: serial: 8250: Passing attr_group to universal driver
  • From: CrescentCY Hsieh
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Bill Wendling
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Jiri Slaby
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Jiri Slaby
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Gustavo A. R. Silva
• [PATCH] printk: Rename console_replay_all() and update context
  • From: Sreenath Vijayan
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Jiri Slaby
• Re: Subject: [SECURITY] Vulnerability in Linux Kernel
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: Subject: [SECURITY] Vulnerability in Linux Kernel
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [DO NOT MERGE v8 14/36] clk: Compatible with narrow registers
  • From: Stephen Boyd
• [PATCH] tty: mxser: Remove __counted_by from mxser_board.ports[]
  • From: Nathan Chancellor
• Re: [DO NOT MERGE v8 25/36] dt-bindings: vendor-prefixes: Add iodata
  • From: Conor Dooley
• Re: [DO NOT MERGE v8 26/36] dt-bindings: ata: ata-generic: Add new targets
  • From: Conor Dooley
• Re: [DO NOT MERGE v8 13/36] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v8 08/36] clocksource: sh_tmu: CLOCKSOURCE support.
  • From: Andy Shevchenko
• Re: [DO NOT MERGE v8 24/36] dt-binding: sh: cpus: Add SH CPUs json-schema
  • From: Rob Herring (Arm)
• Re: [DO NOT MERGE v8 22/36] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Rob Herring (Arm)
• Re: [PATCH/RFC 1/3] earlycon: Export clock and PM Domain info from FDT
  • From: Geert Uytterhoeven
• Re: [PATCH v5 1/3] VT: Use macros to define ioctls
  • From: Al Viro
• [DO NOT MERGE v8 02/36] sh: Kconfig unified OF supported targets.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 04/36] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 01/36] sh: passing FDT address to kernel startup.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 00/36] Device Tree support for SH7751 based board
  • From: Yoshinori Sato
• [DO NOT MERGE v8 03/36] sh: Enable OF support for build and configuration.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 36/36] sh: j2_defconfig: update
  • From: Yoshinori Sato
• [DO NOT MERGE v8 35/36] sh: LANDISK OF defconfig
  • From: Yoshinori Sato
• [DO NOT MERGE v8 34/36] sh: RTS7751R2D Plus OF defconfig
  • From: Yoshinori Sato
• [DO NOT MERGE v8 33/36] sh: Add dtbs target support.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 32/36] sh: j2_mimas_v2.dts update
  • From: Yoshinori Sato
• [DO NOT MERGE v8 31/36] sh: Add IO DATA USL-5P dts
  • From: Yoshinori Sato
• [DO NOT MERGE v8 30/36] sh: Add IO DATA LANDISK dts
  • From: Yoshinori Sato
• [DO NOT MERGE v8 29/36] sh: add RTS7751R2D Plus DTS
  • From: Yoshinori Sato
• [DO NOT MERGE v8 28/36] sh: SH7751R SoC Internal peripheral definition dtsi.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 27/36] dt-bindings: soc: renesas: sh: Add SH7751 based target
  • From: Yoshinori Sato
• [DO NOT MERGE v8 26/36] dt-bindings: ata: ata-generic: Add new targets
  • From: Yoshinori Sato
• [DO NOT MERGE v8 25/36] dt-bindings: vendor-prefixes: Add iodata
  • From: Yoshinori Sato
• [DO NOT MERGE v8 24/36] dt-binding: sh: cpus: Add SH CPUs json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v8 23/36] mfd: sm501: Convert platform_data to OF property
  • From: Yoshinori Sato
• [DO NOT MERGE v8 22/36] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v8 21/36] dt-bindings: serial: renesas,scif: Add scif-sh7751.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 20/36] serial: sh-sci: fix SH4 OF support.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 19/36] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v8 18/36] irqchip: SH7751 external interrupt encoder with enable gate.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 17/36] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v8 16/36] irqchip: Add SH7751 INTC driver
  • From: Yoshinori Sato
• [DO NOT MERGE v8 15/36] clk: renesas: Add SH7750/7751 CPG Driver
  • From: Yoshinori Sato
• [DO NOT MERGE v8 14/36] clk: Compatible with narrow registers
  • From: Yoshinori Sato
• [DO NOT MERGE v8 13/36] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 12/36] dt-bindings: pci: pci-sh7751: Add SH7751 PCI
  • From: Yoshinori Sato
• [DO NOT MERGE v8 11/36] pci: pci-sh7751: Add SH7751 PCI driver
  • From: Yoshinori Sato
• [DO NOT MERGE v8 10/36] sh: Common PCI Framework driver support.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 09/36] dt-binding: Add compatible SH7750 SoC
  • From: Yoshinori Sato
• [DO NOT MERGE v8 08/36] clocksource: sh_tmu: CLOCKSOURCE support.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 07/36] sh: Fix COMMON_CLK support in CONFIG_OF=y.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 06/36] sh: kernel/setup Update DT support.
  • From: Yoshinori Sato
• [DO NOT MERGE v8 05/36] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y
  • From: Yoshinori Sato
• Re: [PATCH v5 1/3] VT: Use macros to define ioctls
  • From: Arnd Bergmann
• Re: [PATCH v4 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
  • From: Greg Kroah-Hartman
• Re: [PATCH v5 1/3] VT: Use macros to define ioctls
  • From: Jiri Slaby
• Re: [PATCH v4 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
  • From: Lad, Prabhakar
• Re: [PATCH 1/5] dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
  • From: Rob Herring (Arm)
• [PATCH] serial: drop debugging WARN_ON_ONCE() from uart_write()
  • From: Tetsuo Handa
• Re: [PATCH printk v6 00/30] wire up write_atomic() printing
  • From: Petr Mladek
• Re: [PATCH] serial: imx: stop casting struct uart_port to struct imx_port
  • From: Fabio Estevam
• Re: [PATCH] serial: imx: stop casting struct uart_port to struct imx_port
  • From: Ilpo Järvinen
• Re: [PATCH printk v6 00/30] wire up write_atomic() printing
  • From: Petr Mladek
• [PATCH] serial: imx: stop casting struct uart_port to struct imx_port
  • From: Rasmus Villemoes
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: Kernel 6.10-rc1 b,Build error with [PATCH v5 2/3] serial: port: Add support of PNP IRQ
  • From: Andy Shevchenko
• Kernel 6.10-rc1 b,Build error with [PATCH v5 2/3] serial: port: Add support of PNP IRQ
  • From: Woody Suwalski
• Re: [PATCH 1/2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Andy Shevchenko
• Re: [PATCH 4/5] serial: 8250: omap: Support wakeup pinctrl state
  • From: Andy Shevchenko
• Re: [PATCH 3/5] serial: 8250: omap: Set wakeup capable, do not enable
  • From: Andy Shevchenko
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Petr Mladek
• [PATCH/RFC 2/3] pmdomain: core: Avoid earlycon power-down
  • From: Geert Uytterhoeven
• [PATCH/RFC 0/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Geert Uytterhoeven
• [PATCHPATCH 3/3] pmdomain: renesas: rmobile-sysc: Remove serial console handling
  • From: Geert Uytterhoeven
• [PATCH/RFC 1/3] earlycon: Export clock and PM Domain info from FDT
  • From: Geert Uytterhoeven
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• [PATCH printk v6 08/30] serial: core: Provide low-level functions to lock port
  • From: John Ogness
• [PATCH printk v6 12/30] serial: core: Implement processing in port->lock wrapper
  • From: John Ogness
• [PATCH printk v6 09/30] serial: core: Introduce wrapper to set @uart_port->cons
  • From: John Ogness
• [PATCH printk v6 00/30] wire up write_atomic() printing
  • From: John Ogness
• [syzbot] [serial?] WARNING in uart_write
  • From: syzbot
• Re: [PATCH v5 14/17] irqchip/riscv-imsic: Add ACPI support
  • From: Sunil V L
• Re: [PATCH v5 13/17] irqchip/riscv-intc: Add ACPI support for AIA
  • From: Sunil V L
• Re: [PATCH v5 07/17] ACPI: bus: Add RINTC IRQ model for RISC-V
  • From: Sunil V L
• Re: [PATCH 2/2] serial: qcom-geni: Fix qcom_geni_serial_stop_tx_fifo() while xfer
  • From: Doug Anderson
• Re: [GIT PULL] TTY/Serial driver fixes for 6.10-rc1
  • From: pr-tracker-bot
• Re: [PATCH v7 1/7] printk: Save console options for add_preferred_console_match()
  • From: Petr Mladek
• Re: [PATCH 1/2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Doug Anderson
• [PATCH] serial: imx: ensure RTS signal is not left active after shutdown
  • From: Rasmus Villemoes
• Re: [PATCH V3 2/3] arm64: zynqmp: Add resets property for UART nodes
  • From: Michal Simek
• [GIT PULL] TTY/Serial driver fixes for 6.10-rc1
  • From: Greg KH
• Re: [PATCH v4 3/5] serial: sc16is7xx: split into core and I2C/SPI parts (core)
  • From: Geert Uytterhoeven
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] serial: qcom-geni: Fix qcom_geni_serial_stop_tx_fifo() while xfer
  • From: Stephen Boyd
• Re: [PATCH 1/2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Stephen Boyd
• Re: [PATCH v4 3/5] serial: sc16is7xx: split into core and I2C/SPI parts (core)
  • From: Hugo Villeneuve
• [PATCH 2/2] serial: qcom-geni: Fix qcom_geni_serial_stop_tx_fifo() while xfer
  • From: Douglas Anderson
• [PATCH 1/2] serial: port: Don't block system suspend even if bytes are left to xmit
  • From: Douglas Anderson
• [PATCH 0/2] serial: Fix problems when serial transfer is happening at suspend time
  • From: Douglas Anderson
• Re: [PATCH v5 14/17] irqchip/riscv-imsic: Add ACPI support
  • From: Thomas Gleixner
• Re: [PATCH v5 07/17] ACPI: bus: Add RINTC IRQ model for RISC-V
  • From: Bjorn Helgaas
• Re: [PATCH v5 13/17] irqchip/riscv-intc: Add ACPI support for AIA
  • From: Thomas Gleixner
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: [PATCH 0/5] serial: 8250: omap: Add am62 wakeup support
  • From: Francesco Dolcini
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Jakub Kicinski
• Re: N_HDLC line discipline: Race condition
  • From: Dianne Skoll
• Re: N_HDLC line discipline: Race condition
  • From: Jiri Slaby
• [PATCH 5/5] serial: 8250: omap: Set wakeup pinctrl on suspend
  • From: Markus Schneider-Pargmann
• [PATCH 4/5] serial: 8250: omap: Support wakeup pinctrl state
  • From: Markus Schneider-Pargmann
• [PATCH 3/5] serial: 8250: omap: Set wakeup capable, do not enable
  • From: Markus Schneider-Pargmann
• [PATCH 2/5] serial: 8250: omap: Remove unused wakeups_enabled
  • From: Markus Schneider-Pargmann
• [PATCH 1/5] dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
  • From: Markus Schneider-Pargmann
• [PATCH 0/5] serial: 8250: omap: Add am62 wakeup support
  • From: Markus Schneider-Pargmann
• Re: [PATCH v4 3/5] serial: sc16is7xx: split into core and I2C/SPI parts (core)
  • From: Geert Uytterhoeven
• Re: [syzbot] [serial?] possible deadlock in uart_write (2)
  • From: syzbot
• Re: [PATCH v6 1/2] printk: Add function to replay kernel log on consoles
  • From: Sreenath Vijayan
• Re: [PATCH 1/1] tty: serial: handle HAS_IOPORT dependencies
  • From: Maciej W. Rozycki
• Re: [GIT PULL] TTY/Serial driver changes for 6.10-rc1
  • From: pr-tracker-bot
• Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
  • From: Conor Dooley
• Re: [PATCH v6 2/2] tty/sysrq: Replay kernel log messages on consoles via sysrq
  • From: Petr Mladek
• Re: [PATCH v6 1/2] printk: Add function to replay kernel log on consoles
  • From: Petr Mladek
• [GIT PULL] TTY/Serial driver changes for 6.10-rc1
  • From: Greg KH
• Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
  • From: Andy Shevchenko
• [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
  • From: Rob Herring (Arm)
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: N_HDLC line discipline: Race condition
  • From: Dianne Skoll
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Andy Shevchenko
• Re: N_HDLC line discipline: Race condition
  • From: Jiri Slaby
• Re: [RESEND v7 15/37] clk: renesas: Add SH7750/7751 CPG Driver
  • From: Geert Uytterhoeven
• Re: [RESEND v7 00/37] Device Tree support for SH7751 based board
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Doug Brown
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Rob Herring
• Re: [RESEND v7 00/37] Device Tree support for SH7751 based board
  • From: John Paul Adrian Glaubitz
• Re: [RESEND v7 00/37] Device Tree support for SH7751 based board
  • From: Yoshinori Sato
• Re: [PATCH printk v5 12/30] serial: core: Implement processing in port->lock wrapper
  • From: Petr Mladek
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Andy Shevchenko
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Jonas Gorski
• Re: [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Jiri Slaby
• RE: [PATCH v1 1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  • From: Hal Feng
• [PATCH] serial: pxa: Disable TX interrupt if there is no more data to transmit
  • From: Doug Brown
• [PATCH] serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
  • From: Doug Brown
• Re: [PATCH v2] serial: core: only stop transmit when HW fifo is empty
  • From: Doug Brown
• Re: [PATCH v4 00/11] LIN Bus support for Linux
  • From: Christoph Fritz
• [PATCH v3][next] tty: sunsu: Simplify device_node cleanup by using __free
  • From: Shresth Prasad
• Re: [RESEND v7 00/37] Device Tree support for SH7751 based board
  • From: John Paul Adrian Glaubitz
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Rob Herring
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Mark Brown
• [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  • From: Conor Dooley
• Re: [PATCH printk v5 09/30] serial: core: Introduce wrapper to set @uart_port->cons
  • From: Petr Mladek
• [PATCH v1 2/3] serial: 8250_dw: Use reset array API to get resets
  • From: Hal Feng
• [PATCH v1 1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  • From: Hal Feng
• [PATCH v1 0/3] Add the core reset for UARTs of StarFive JH7110
  • From: Hal Feng
• [PATCH v1 3/3] riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
  • From: Hal Feng
• Re: [PATCH v2] serial: core: only stop transmit when HW fifo is empty
  • From: Doug Brown
• Re: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Frank Li
• Re: N_HDLC line discipline: Race condition
  • From: Dianne Skoll
• Re: N_HDLC line discipline: Race condition
  • From: Dianne Skoll
• Re: N_HDLC line discipline: Race condition
  • From: Jiri Slaby
• [BUILD SUCCESS] LAST PATCH: [PATCH v1 2/2] serial: 8250_dw: Revert "Move definitions to the shared header"
  • From: kernel test robot
• Re: [PATCH] vt: keyboard: Use led_set_brightness() in LED trigger activate() callback
  • From: Jiri Slaby
• RE: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Joshua Yeong
• Re: [PATCH v2][next] tty: sunsu: Simplify device_node cleanup by using __free
  • From: Shresth Prasad
• [PATCH v1 1/2] serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
  • From: Andy Shevchenko
• [PATCH v1 2/2] serial: 8250_dw: Revert "Move definitions to the shared header"
  • From: Andy Shevchenko
• [PATCH v1 0/2] serial: 8250_dw: Fix console on Intel Galileo
  • From: Andy Shevchenko
• Re: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH 1/1] tty: n_tty: Fix buffer offsets when lookahead is used
  • From: Ilpo Järvinen
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Vadym Krevs
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Ilpo Järvinen
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Andy Shevchenko
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Vadym Krevs
• Re: [Bug] staging: rtl8723bs: Bluetooth stops working after patch: serial: 8250_dw: Do not reclock if already at correct rate
  • From: Andy Shevchenko
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Ilpo Järvinen
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Andy Shevchenko
• Re: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Andy Shevchenko
• Fwd: [regression] [bisected] commit 6bb6fa6908ebd3cb4e14cd4f0ce272ec885d2eb0 corrupts data sent via pseudoterminal device
  • From: Bagas Sanjaya
• [Bug] staging: rtl8723bs: Bluetooth stops working after patch: serial: 8250_dw: Do not reclock if already at correct rate
  • From: Philipp Hortmann
• RE: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Joshua Yeong
• Re: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Frank Li
• RE: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Joshua Yeong
• Re: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Frank Li
• Re: [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Ilpo Järvinen
• Re: [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Ilpo Järvinen
• Re: [PATCH v3 2/2] platform/surface: aggregator: Log critical errors during SAM probing
  • From: Hans de Goede
• Re: [PATCH v4 01/11] can: Add LIN bus as CAN abstraction
  • From: Simon Horman
• Re: [PATCH] vt: keyboard: Use led_set_brightness() in LED trigger activate() callback
  • From: Hans de Goede
• Re: [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Jiri Slaby
• Re: [PATCH] vt: keyboard: Use led_set_brightness() in LED trigger activate() callback
  • From: Jiri Slaby
• RE: [PATCH resend v9 1/8] i3c: add target mode support
  • From: Joshua Yeong
• Re: [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz
• [PATCH] vt: keyboard: Use led_set_brightness() in LED trigger activate() callback
  • From: Hans de Goede
• Re: [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Christoph Fritz
• [tty:tty-testing] BUILD SUCCESS e21de1455a721a0cb4217b18589ede846f5b0686
  • From: kernel test robot
• Re: [PATCH] tty: vt: saturate scrollback_delta to avoid overflow
  • From: Justin Stitt
• Re: [PATCH v4 10/11] can: lin: Support setting LIN mode
  • From: Ilpo Järvinen
• Re: [PATCH v4 09/11] can: lin: Handle rx offload config frames
  • From: Ilpo Järvinen
• Re: [PATCH v4 07/11] can: Add support for hexDEV serial LIN adapter hexLINSER
  • From: Ilpo Järvinen
• Re: [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Ilpo Järvinen
• Re: [PATCH v4 03/11] treewide, serdev: add flags argument to receive_buf()
  • From: Ilpo Järvinen
• Re: [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Ilpo Järvinen
• Re: [PATCH] serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  • From: Andy Shevchenko
• Re: [PATCH v4 01/11] can: Add LIN bus as CAN abstraction
  • From: Ilpo Järvinen
• Re: [PATCH] serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  • From: Tony Lindgren
• Re: [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Greg Kroah-Hartman
• [PATCH v2 net] ptp: ocp: adjust serial port symlink creation
  • From: Vadim Fedorenko
• Re: [PATCH] tty: vt: saturate scrollback_delta to avoid overflow
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Ilpo Järvinen
• Re: [PATCH] tty: vt: saturate scrollback_delta to avoid overflow
  • From: Justin Stitt
• Re: [PATCH] tty: vt: saturate scrollback_delta to avoid overflow
  • From: Justin Stitt
• Re: [PATCH v4 06/11] dt-bindings: net/can: Add serial LIN adapter hexLINSER
  • From: Conor Dooley
• [PATCH v4 11/11] HID: hexLIN: Implement ability to update lin mode
  • From: Christoph Fritz
• [PATCH v4 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz
• [PATCH v4 06/11] dt-bindings: net/can: Add serial LIN adapter hexLINSER
  • From: Christoph Fritz
• [PATCH v4 07/11] can: Add support for hexDEV serial LIN adapter hexLINSER
  • From: Christoph Fritz
• [PATCH v4 10/11] can: lin: Support setting LIN mode
  • From: Christoph Fritz
• [PATCH v4 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz
• [PATCH v4 05/11] dt-bindings: vendor-prefixes: Add hexDEV
  • From: Christoph Fritz
• [PATCH v4 03/11] treewide, serdev: add flags argument to receive_buf()
  • From: Christoph Fritz
• [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Christoph Fritz
• [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz
• [PATCH v4 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz
• [PATCH v4 00/11] LIN Bus support for Linux
  • From: Christoph Fritz
• Re: [PATCH v3 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz
• Re: [PATCH v3 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz
• Re: [PATCH v3 07/11] can: Add support for serdev LIN adapters
  • From: Christoph Fritz
• Re: [PATCH v3 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz
• [PATCH] serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  • From: Hans de Goede
• Re: [PATCH v1 2/2] serial: 8250: Extract platform driver
  • From: Andy Shevchenko
• Re: Fwd: Add method to allow switching kernel level PPS signal from DCD to CTS serial pin
  • From: Bagas Sanjaya