Re: [PATCH v2] dt-bindings: serial: rs485: Fix rs485-rts-delay property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 13, 2024 at 12:55:23PM +0200, Michal Simek wrote:
> Code expects array only with 2 items which should be checked.
> But also item checking is not working as it should likely because of
> incorrect items description.
> 
> Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
> Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>
> ---
> 
> Changes in v2:
> - Remove maxItems properties which are not needed
> - Add stable ML to CC
> 
>  .../devicetree/bindings/serial/rs485.yaml     | 19 +++++++++----------
>  1 file changed, 9 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
> index 9418fd66a8e9..9665de41762e 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.yaml
> +++ b/Documentation/devicetree/bindings/serial/rs485.yaml
> @@ -18,16 +18,15 @@ properties:
>      description: prop-encoded-array <a b>
>      $ref: /schemas/types.yaml#/definitions/uint32-array
>      items:
> -      items:
> -        - description: Delay between rts signal and beginning of data sent in
> -            milliseconds. It corresponds to the delay before sending data.
> -          default: 0
> -          maximum: 100
> -        - description: Delay between end of data sent and rts signal in milliseconds.
> -            It corresponds to the delay after sending data and actual release
> -            of the line.
> -          default: 0
> -          maximum: 100
> +      - description: Delay between rts signal and beginning of data sent in
> +          milliseconds. It corresponds to the delay before sending data.
> +        default: 0
> +        maximum: 50

I would expect to see some mention in the commit message as to why the
maximum has changed from 100 to 50 milliseconds.

> +      - description: Delay between end of data sent and rts signal in milliseconds.
> +          It corresponds to the delay after sending data and actual release
> +          of the line.
> +        default: 0
> +        maximum: 100
>  
>    rs485-rts-active-high:
>      description: drive RTS high when sending (this is the default).
> -- 
> 2.43.0
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux