Add compatibles representing UART support on SA8255p.
Clocks and interconnects are being configured in the firmware VM
on SA8255p platform, therefore making them optional.
CC: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
Signed-off-by: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
---
.../serial/qcom,serial-geni-qcom.yaml | 58 ++++++++++++++++---
1 file changed, 51 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
index dd33794b3534..dcd43e1353ec 100644
--- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -13,11 +13,42 @@ maintainers:
allOf:
- $ref: /schemas/serial/serial.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sa8255p-geni-uart
+ - qcom,sa8255p-geni-debug-uart
+ then:
+ required:
+ - power-domains
+ - power-domain-names
+ properties:
+ power-domains:
+ minItems: 2
+ maxItems: 2
+ else:
+ required:
+ - clocks
+ - clock-names
+ properties:
+ power-domains:
+ maxItems: 1
+ interconnects:
+ maxItems: 2
+ interconnect-names:
+ items:
+ - const: qup-core
+ - const: qup-config
+
properties:
compatible:
enum:
- qcom,geni-uart
- qcom,geni-debug-uart
+ - qcom,sa8255p-geni-uart
+ - qcom,sa8255p-geni-debug-uart
clocks:
maxItems: 1
@@ -26,12 +57,10 @@ properties:
const: se
interconnects:
- maxItems: 2
+ description: phandles of interconnect bw provider
interconnect-names:
- items:
- - const: qup-core
- - const: qup-config
+ description: names of interconnects
interrupts:
minItems: 1
@@ -51,15 +80,19 @@ properties:
- const: sleep
power-domains:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
+
+ power-domain-names:
+ items:
+ - const: power
+ - const: perf
reg:
maxItems: 1
required:
- compatible
- - clocks
- - clock-names
- interrupts
- reg
@@ -83,4 +116,15 @@ examples:
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@990000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ reg = <0x990000 0x4000>;
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&scmi11_pd 4>, <&scmi11_dvfs 4>;
+ power-domain-names = "power", "perf";
+ };
...
--
2.34.1
